Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Help needed with G.Skill ram timings to get all or most of their speed

07 Apr 2012   #21
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Those timings are a little tighter than default, it's all good.
I would leave them there, unless you want to see how tight you can get them

Enjoy, that is a nice setup.


My System SpecsSystem Spec
.
07 Apr 2012   #22
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Cheers Dave I'm over the moon and when I finally move to my zambezi then I can look to getting all of the 2133 out of the sticks.
My System SpecsSystem Spec
Reply

 Help needed with G.Skill ram timings to get all or most of their speed




Thread Tools




Similar help and support threads
Thread Forum
How to set memory speed and timings
I installed DDR3 1866 but the memory is running at 1600. My question is how to change the speed to 1866. I changed the multiplier from 8 to 9.33 leaving "Auto" for the timings but that resulted in no boot. The memory is Patriot PV38G186C9KRD. The spec is DDR3 1866 with 9-10-9-27. FX-6300 is running...
PC Custom Builds and Overclocking
Ram speed and timings etc
I just got an 8Gb kit (2x4) Corsair Vengeance but can only get it to run at 1333, it should go to 1600, but no matter what I have done it wont change. Set up in Bios to 1600, AMD so can't use XMP profile ! 1333 is spd timings at 1.5 volt, however advertising says 1600 and quotes 1.65 volts, mine...
PC Custom Builds and Overclocking
NEW Memory - Higher Speed - Overclock Setting Changes needed
I purchased new memory for my computer and need assistance with making changes to get the memory frequency upto 2133. Below are all my current BIOS settings. Any help (changes) , even in other parts, would be appreciated. CPU Clock Ratio CPU Frequency: 3.8GHz (181x21) Advanced CPU...
PC Custom Builds and Overclocking
G Skill Ripjaws F3-10666CL9S-4GBRL 4GB DDR3 (1333MHz,Cas 9) timings ?
Hi i have G Skill Ripjaws F3-10666CL9S-4GBRL 4GB DDR3 (1333MHz,Cas 9) The timings that auto selct with my mobo are cas 7! however this causes programs to stop working,it doesnt crash the pc but crashes the program . What are the mem timings i should use this at, This is for another pc...
PC Custom Builds and Overclocking
New Memory New Timings, New Speed, NOT Happening.
So as we all know RAM is getting cheap so I thought I would get myself 8gb of Ram. This is where the Fun stops. Installed RAM and then found it works. YAY But only at 1333 not the 1600 its ment to be at. So I went into the Bios and Changed too 1600, NOTHING. NO POST. Had to reset...
Performance & Maintenance
mac like net-speed meter needed...
i m wondering is there something like du meter...i remember once i saw my friend's mac and his net speed meter was very tiny running in his taskbar (mac finder bar) n it was so sleek and stylish. i use du meter but i want to get rid of it, is there anything same as that of mac that i put it in...
Browsers & Mail


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App