Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: What is the total number of fans in your rig.

14 May 2012   #51
IownAmoneyPit

Windows 7 Pro x 2/Windows 10 Home/10 Pro//Windows 10 Insider Preview ?
 
 

Quote   Quote: Originally Posted by Hopalong X View Post
Quote   Quote: Originally Posted by IownAmoneyPit View Post
Coolermaster HAF 932 case - 3 x 230mm fans (front intake, side & top exhaust) 1 x 140mm rear exhaust fan, 2 x 120mm CPU fans push pull config.
Is yours a four wheel drive version also?

You have to watch out for the bugs in the grill (front intake) after going for a spin.
I left the optional wheels off and thankfully not many bugs to worry about.

Quote   Quote: Originally Posted by tw33k View Post
I have a total of 14 fans in my case (I've added one more since this pic)

Attachment 211441
tw33k Slap a wing on each side of the case and you will have the worlds first flying case no more need to use remote desktop or use a laptop just install microsoft flight, program the coordinates of your destination and you're good to go.


My System SpecsSystem Spec
.
14 May 2012   #52
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

You've heard of maglev well this is a fanlev rig. It hovercrafts all over the floor.
My System SpecsSystem Spec
20 May 2012   #53
martin123

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Just the 1 and it keeps the temps down too



And yes your right you can see a 2.5 laptop drive i'm using that as my main drive as its only 400gb but what you cant see is the 2tb drive under the disk drive (that was the main drive)
My System SpecsSystem Spec
.

20 May 2012   #54
ganjiry

Win7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by A Guy View Post
All you need is a CPU cooler...

Scythe Susanoo

A Guy
thats one BIG ASS cooler..
here's how i have my fan setup. aswell as what u see in the pic i have a 200mm on the side panel as intake too.in the picture the H50 is setup as push pull intake but its been turned bk round since the pic was taken. im planning on gettin a H100 in the next week which will be mounted up top with 2 fans pushing air up and out through the rad. then ill have a 120 as exhaust where the H50 was.
in the front i have the stock corsair filter but the top and side panel i made filters from steal and copper wire mesh. they do a great job
Case temps are usually between 25c and 29c depending on if im gaming.
Gpu idle 44c, load 58/60c
Cpu idle 35c load(IBT) 50c, (BF3)45c


Attached Thumbnails
What is the total number of fans in your rig.-airflow.jpg   What is the total number of fans in your rig.-side-panel-filter.jpg   What is the total number of fans in your rig.-top-filter.jpg  
My System SpecsSystem Spec
20 May 2012   #55
Mythical

Windows 7 Home Premium 64bit
 
 

I have around 3 fans within my case.

It keeps my CPU at 34C, Mainboard at 34C, and Harddisk at 32C.
My System SpecsSystem Spec
20 May 2012   #56
stormy13
Microsoft MVP

Win 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by martin123 View Post
Just the 1 and it keeps the temps down too
I hope you don't honestly believe that your CPU is running at 10C, as it is physically impossible for it to be running at anything less than the ambient/room temperature.
My System SpecsSystem Spec
20 May 2012   #57
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Martin123,
Especially with the dust all over the fan blades and then imagine what's going on below it in the cooling fins. I would consider a top to bottom clean, getting all dust out of intakes and exhausts???? but for sure the single fan and all cooling fins.
Then get the air and blast that PSU as it will be loaded with dust as it is likely as much of an exhaust as anything in your system. Sometimes less is more and somethings it's just less?
My System SpecsSystem Spec
20 May 2012   #58
windude99

Windows 7 Professional x64 Service Pack 1
 
 

If you are counting the power supply and graphics card, I have a total of 4 fans in my rig.
My System SpecsSystem Spec
20 May 2012   #59
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Exactly, I count any and all fan sources.
My System SpecsSystem Spec
21 May 2012   #60
martin123

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by linnemeyerhere View Post
Martin123,
Especially with the dust all over the fan blades and then imagine what's going on below it in the cooling fins. I would consider a top to bottom clean, getting all dust out of intakes and exhausts???? but for sure the single fan and all cooling fins.
Then get the air and blast that PSU as it will be loaded with dust as it is likely as much of an exhaust as anything in your system. Sometimes less is more and somethings it's just less?
The temps was took after the clean lol and yes the temp drops lower then 10 where i live at night with the doors open but i took a shot with the doors shut just for you


Attached Images
What is the total number of fans in your rig.-temps.png 
My System SpecsSystem Spec
Reply

 What is the total number of fans in your rig.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
fans on NB
what up guys? so the only component in my rig tht gets hot is the NB. and that's because my massive GPU is blocking any moving air to it. so how do u attach a fan to the NB? do u guys have pics? I have a nice fan to use, but yea still.
PC Custom Builds and Overclocking
fans in or out?
hi i have a question about fans.my case is the corsair carbide 400r. there are 2 x120mm intake fans in the front ( which come with the pc), 1x 120mm fan in the back. and then extra room for 2x 120mm or 140mm fans on the top. and space for 2x 120mm or 140mm fans on the side, and 1x on the base...
PC Custom Builds and Overclocking
Fans
hello sevenforums, was looking at getting this product Hotway 4-Bay non-RAID USB3.0/eSATA Enclosure 4-BAY ENCLOSURE anyway i was just having a look at replacement fans if i decided to change it but the measurements are 80 x 80 x 20 mm and most the 80 mm fans are 80 x 80 x 25 mm :S does...
PC Custom Builds and Overclocking
Hey Fans
I have got a pc tower which only has a fan up at the top and at the back????????? The psu is up near the top as well. My mates used to have the back set as intake and the top as exhaust and got better temps, i tried it and the temps are in the 38% and hwen i ran a couple of programs i ened up...
PC Custom Builds and Overclocking
help with fans
ok so i need input i have 4 fan connecters on my mother board CPU Fan - 4 pin Pwr Fan - 3 pin Sys Fan 1 - 3 pin - Un-used Sys Fan 2 - 4 pin its a gigabyte MB that comes with easytune which lets me keep CPU fan at 100% ok so this is the deal
PC Custom Builds and Overclocking
Help with fans.
Have alook at the case pictures, can you please tell me which way i should have all the fans.??????????? A 120mm can be installed a front, 2 x 120 mm on the side and 140mm maximum on top of case. The case is NZXT Beta Evo Black Metal Edition (BEVO-001BK)
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:07.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App