Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can anyone assist with my memory and CPU-Z readings

07 May 2012   #1
customBUILDER

Windows 7 Ultimate x86
 
 
Can anyone assist with my memory and CPU-Z readings

Hi all,

Im currently running CPU-z, speedfan and core temp. Ive added a screenie of CPU-z.



Am i getting this wrong or is there a problem. BIOS says that it is set to run at 1333mhz at 9-9-9-24 @ 1.500v not 533.3mhz 8-8-8-20 as CPU-z says

Thanks


My System SpecsSystem Spec
.
07 May 2012   #2
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

running at 1066 did you check XMP on the mem sticks that might be your issues

Some boards you can simply change it to the rated speed others might need some work to make it happen ussually overclocking will set it right but should be set correctly if the board supports that speed
My System SpecsSystem Spec
07 May 2012   #3
customBUILDER

Windows 7 Ultimate x86
 
 

Just gone back into BIOS, dunno if its anything to do with XMP as you mentioned as im new to all this stuff but i changed the MCH freq latch to 200mhz and the SPD to 4.00 and its sorted it.

So thank you

My System SpecsSystem Spec
.

07 May 2012   #4
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

yup you used XMP which allows you to either bring your ram to rated speed or clock it further Xtreme memory profile

You just had to adjust the timings which was very easy for you ,that's awesome there are some threads you might want to check out for future use

Overclocking setting tighter ram timmings etc Tutorials - Windows 7 Forums=
My System SpecsSystem Spec
07 May 2012   #5
customBUILDER

Windows 7 Ultimate x86
 
 

Thank you, ill take a look.

It was a little weird, it was set at 333mhz which ran at 1066 and at 266mhz it was even lower, but its done now

Thank you very much, now i can look into doing cpu and maybe gpu if i can
My System SpecsSystem Spec
07 May 2012   #6
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Good luck and be carefull with Overclocking andmake sure to have good cooling because things tend to heat up
My System SpecsSystem Spec
07 May 2012   #7
customBUILDER

Windows 7 Ultimate x86
 
 

Will do, im hoping to get water cooling but will have to wait till after i get married in june.
My System SpecsSystem Spec
Reply

 Can anyone assist with my memory and CPU-Z readings




Thread Tools




Similar help and support threads
Thread Forum
Ai suite 11 readings
I'm getting "abnormal" readings and would like to know how to correct this problem. Thanks, Paul I also just did an update to the latest BIOS.
Hardware & Devices
Core temp high readings.
So I left my pc on last night and I woke up with an alert from coretemp so I took a peak at it and saw this As you can see it has a hight of over 140degrees is this something that should concern me or just a one off thing due to software etc?
Performance & Maintenance
Dual SpeedFan +5 Readings
Maybe it has always been there, but I don't remember it being so. As seen in the screenshot, SF shows two different +5 voltages, one normal and one high. There is the option to display - 5 voltage, but I have that disabled. My main concern is the high +5 voltage, since it is beyond the 10%...
Hardware & Devices
Please assist with KOTOR 2
Hi Guys, I've been floating around from site to site trying to find a straight answer to my question. Any help would be much appreciated. I have gotten KOTOR 2 to run on my Windows 7 64-bit laptop without making any drastic alterations to the files besides for installing the latest patches....
Gaming
Rename Assist Please
Hi Guys :D I have just upgraded my PC and used the copy of Windows 7 Pro that I have ... no problems there .... the only issue I have is the shop that installed this for me put 'USER" as the user name .... so in my C:\User Folder it reads C:\User\User. Not really an issue but I'd like it to...
General Discussion
CPUZ processor readings
Ok here goes a really dumb noob question... I have just changed my power management settings from balanced to high performance. Previously in CPUZ my processor (i5 750) would read 1.2GHz with the multiplier x9 (cos speed stepping was on) and only when stressed go up to the 3.2GHz max as the...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App