Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: How to see if your system is stable while overclocking

08 Jul 2012   #1
simonwetting

Windows 7 ultimate 64 bit
 
 
How to see if your system is stable while overclocking

I'm very new to overclocking and I'm really bad at it. I can't overclock higher than 5 %. It is not because my hardware is bad because I can auto overclock to 29 % without any trouble. For my cpu I can adjust 10 voltages and I really don't understand it anymore. Can anybody explain me why there are multiple voltages in the cpu and which voltage does what.

My English is maybe bad because I am dutch.


My System SpecsSystem Spec
.
08 Jul 2012   #2
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Simonwetting,
This is where you want to detail all of your system details in My System Specs.
My System SpecsSystem Spec
09 Jul 2012   #3
simonwetting

Windows 7 ultimate 64 bit
 
 

Motherboard:Asus Rampage IV Extreme
CPU: Intel i7 3820 K
GPU: AMD Radeon 7770
Cooling: Corsair H100
RAM: 4 x 4 GB G skill Ripjaw z 1600 Mhz stock frequency

baseclock 100 Mhz
Multiplier 37
cpu vcore voltage 1.240
cpu vccsa voltage 0.865
cpu pll voltage 1.8
vtt cpu voltage 1.1
2nd vtt cpu voltage 1.05099
pch1.1VG voltage 1.10387
dram cha ctrl voltage 0.5
drama cha data voltage 0.5
dram chb ctrl voltage 0.5
pch 1.1 voltage 1.1
pch 1.5 voltage 1.5
vttddr ab voltage 0.75
vttddr cd voltage 0.75
dram CHAB voltage 1.5
dram chcd voltage 1.5
dram chb data voltage 0.5
dram chc ctrl voltage 0.5
dram chc data voltage 0.5
dram chd ctrl voltage 0.5
dram chd data voltage 0.5
vga1 core voltage 0.0
vga1 mem voltage 0.0
vga1 pll voltage 0.0
vga2 core voltage 0.0
vga2 mem voltage 0.0
vga2 pll voltage 0.0
My System SpecsSystem Spec
.

Reply

 How to see if your system is stable while overclocking




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
System Stable ... Nagging Event Viewer Mssgs (BCM42RLY/PMEM/WUDFRd)
The BCM42RLY service failed to start due to the following error: The system cannot find the file specified. The driver \Driver\WUDFRd failed to load for the device ACPI\PNP0A0A\2&daba3ff&2. PMEM is new.... other two been around a while. The PMEM service failed to start due to the following...
Drivers
System Freezes and not stable after installing Crosshair RAM?
I am getting a 30 second freeze after installing new RAM and sometimes a BSOD with memory code 0x00000f4 This is my system specs and its all new, i replaced everything within the past month so Im pretty sure its not a comopnant fairure but an installation failure. (yes I checked everything is...
PC Custom Builds and Overclocking
Deleted System Partition - Stable, Unstable?
Hi, guys. This is my first post. I'm getting ready to encrypt my hard disk with DiskCryptor. Before I do, I want to make sure my system is stable. I removed the 100MB Windows 7 System Reserved Partition, following the directions in the two tutorials below ... ...
Hardware & Devices
Random BSODs for 2 days, system has been stable for 2+ yrs
Random BSODs for the last 2 days, no problems for 2 yrs+ on this system
BSOD Help and Support
Overclocking system AND graphic card
Hi, Just a simple question, Q. Is it safe/stable to overclock system and in addition to that also overclock graphic card.? How to be sure for stability. previous Gr. Card HD 4350 died I suspect because I did little overclocking in system ( as now) and then in graphic card was on AUto Tune,...
PC Custom Builds and Overclocking
BSOD 4A - prime stable, memtest stable in safe mode.
Hey guys, You've been a great resource for my past BSOD issues but I have a new one now and hope you can help. I recently started getting random freezes with no BSODs so I've been fiddling with the BIOS settings and such until I got a BSOD. Here is the BSOD I got, hopefully this will help me...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App