Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New Build PC, USB Ports Not Installing Correctly.


24 Jul 2012   #1

Windows 7 Professional 64 Bit
 
 
New Build PC, USB Ports Not Installing Correctly.

Hi All.

Strange one if I may.

This is not the system in my specs !
I have just built a new HTPC.
I have used a Zotac NM10-ITX motherboard, with 2GB ram, and booting from a Corsair 30GB SSD, and running on Windows 7 Professional.
It has a 1TB Hitachi Sata2 data drive.

System is all running, and I thought ok.
Until I went to transfer some more data onto the second drive.
It appears my USB ports are running at USB1 speed !
I get the pop up reporting the connected device can run faster.

I installed all the drivers from the install CD that came with the mobo, and have since deleted the drivers in hardware manager, and allowed windows to install again.

What more can I do to get these ports running at USB2 speed ?

I'm completely confused by this, and any assistance would be gratefully received.

Andy

My System SpecsSystem Spec
.

24 Jul 2012   #2

Windows 7 Professional
 
 

Uninstall all of your USB drivers and reboot.

Also, this: 6.1.7601 USB Driver Update Fix
My System SpecsSystem Spec
24 Jul 2012   #3

Windows 7 Professional 64 Bit
 
 

Thanks for the quick reply, panic over !

I cleared the cmos by mistake after the jumper fell off turning the case over to do it up

It seems I did not set everything correctly again, and the USB2 controller was set to disable in the Bios.

My bad, sorry guys

Andy
My System SpecsSystem Spec
.


Reply

 New Build PC, USB Ports Not Installing Correctly.




Thread Tools



Similar help and support threads for2: New Build PC, USB Ports Not Installing Correctly.
Thread Forum
Solved Front USB ports not working, but rear USB ports work… Hardware & Devices
Problem Installing from USB on New BUild Installation & Setup
After installing clean windows 7 usb ports doesn't work Drivers
3TB internal HD not installing correctly Hardware & Devices
windows 7 not installing on a new build please help?? Drivers
Intel Turbo boost is not installing correctly Drivers
Fonts not installing correctly General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:41 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33