New Build PC, USB Ports Not Installing Correctly.


  1. Andy 01
    Posts : 47
    Windows 7 Professional 64 Bit
       New #1

    New Build PC, USB Ports Not Installing Correctly.


    Hi All.

    Strange one if I may.

    This is not the system in my specs !
    I have just built a new HTPC.
    I have used a Zotac NM10-ITX motherboard, with 2GB ram, and booting from a Corsair 30GB SSD, and running on Win7 Professional.
    It has a 1TB Hitachi Sata2 data drive.

    System is all running, and I thought ok.
    Until I went to transfer some more data onto the second drive.
    It appears my USB ports are running at USB1 speed !
    I get the pop up reporting the connected device can run faster.

    I installed all the drivers from the install CD that came with the mobo, and have since deleted the drivers in hardware manager, and allowed windows to install again.

    What more can I do to get these ports running at USB2 speed ?

    I'm completely confused by this, and any assistance would be gratefully received.

    Andy
      My Computer
    Quote Quote

  3. dtxx
    Posts : 18
    Windows 7 Professional
       New #2

    Uninstall all of your USB drivers and reboot.

    Also, this: 6.1.7601 USB Driver Update Fix
      My Computer
    Quote Quote

  4. Andy 01
    Posts : 47
    Windows 7 Professional 64 Bit
    Thread Starter
       New #3

    Thanks for the quick reply, panic over !

    I cleared the cmos by mistake after the jumper fell off turning the case over to do it up

    It seems I did not set everything correctly again, and the USB2 controller was set to disable in the Bios.

    My bad, sorry guys

    Andy
      My Computer
    Quote Quote

 

  Related Discussions
I am downgrading from win 10 to win 7 on this laptop and everything has been fine until I started installing drivers, almost every driver I install doesn't seem to install correctly... this has never happened before to me i'm just baffled! After install, the driver doesn't update like it usually...
New PC build, lacking internal USB ports, need options
in PC Custom Builds and Overclocking

Hey guys, I'm putting together new PC build and made a tiny mistake. I didn't think to look at internal USB 2.0 ports when choosing a new motherboard. The motherboard I picked out is MSI X99S MPOWER. The motherboard only came with two internal USB 2.0 ports. Which is fine but the case I got is...
Hey everyone, So the intro is what im trying to do and then i will dive into my issues. My car radio needs a firmware update. The only way to do this is to connect a laptop with Bluetooth to it and do a file transfer directly to a folder in the radios memory. Now the problem: I can connect...
I have 3 internal hard drives and am trying to add a 4th. The ones that I have are a 1TB (Boot), a 2TB MBR, and a 3TB MBR. When I try to install the 2nd 3TB one and go into Disk Management to create the partitions, it only shows this 4th HD as being 746.52GB! In fact, I have already returned one to...
Fonts not installing correctly
in General Discussion

I often need to upload and utilize various fonts in my line of work, I recently used the install as shortcut feature from an outside folder that ultimately screwed everything up in the fonts themselves. I have a total of 20 fonts that show up in the folder whereas there used to be 430 something....
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 09:51.
Find Us