Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock! [2]

10 Jan 2013   #351
d4ph0d

Windows 7 Ultimate x64
 
 

that's the minimum i can go for the vcore on the 4.8ghz oc. but just doing that for fun. i never run it for long period of time. and i cant benchmark with it because the temp goes to high now and i actually score lower than with my 4.4ghz oc which temp are pretty ok and safe to run @100%CPU use.


My System SpecsSystem Spec
.
15 Jan 2013   #352
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Well, I found the wall, 4.8GHz 1.304v (DVID +0.140v) boots fine but crashes when starting IBT.
Didn't want to go anymore on the voltage.
4.7GHz 1.284v passes IBT average temp mid/upper 80's.
Going to run at 4.6GHz 1.224v average IBT temps mid 80's.
Post Your Overclock! [2]-intel-bt-4.6-19-20-test-.png Post Your Overclock! [2]-intel-bt-4.6-finish-20runs-.png

Post Your Overclock! [2]-prime95-4.6-first-temp-snip3-16jan13-.png


My System SpecsSystem Spec
15 Jan 2013   #353
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by Dave76 View Post
Well, I found the wall, 4.8GHz 1.304v (DVID +0.140v) boots fine but crashes when starting IBT.
Didn't want to go anymore on the voltage.
4.7GHz 1.284v passes IBT average temp mid/upper 80's.
Going to run at 4.6GHz 1.224v average IBT temps mid 80's.
Attachment 250404 Attachment 250403
Dave that is a excellent Oc and good Temps
even thought our Tech is worlds apart I found a wall at 4.8Ghz and the same reason voltages wise was the reason i didn't want to push further

It's so fun reaching those high clocks but how much do you really notice even when Encoding movies they still appear to be around the same decompression and burn time

So sometimes I ask myself how much Benefit am I actually getting from where i was before and now especially going with a better cpu then the previous
My System SpecsSystem Spec
.

15 Jan 2013   #354
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Thanks.
Agree with you, it's all about the fun we have playing with the settings to see what it can do, and we learn as we go.
My System SpecsSystem Spec
16 Jan 2013   #355
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Nice job Dave. Great overclock. I also agree with you and Solar. Pretty much, my experience has been that anything over 4.5 is just for show. But, I can't help myself, I have to play in bios every once in a while. Why else do we buy these rigs?
My System SpecsSystem Spec
17 Jan 2013   #356
Bungee18

Windows 7 Ultimate x64 SP1
 
 

Solar,
Can I ask for your settings on your 8350 OC? Not only multiplier, vcore nad FSB, but also nb voltage, cpu nb voltage, HT speed and voltage, LLC settings, ram settings, etc...
I'll be finishing my rebuild with the new 8320 and new mobo this evening and now that I have a better cooler I would like to experiment!
My System SpecsSystem Spec
17 Jan 2013   #357
Bungee18

Windows 7 Ultimate x64 SP1
 
 

Dave,
Nice OC!
Not that I know much about Intel (or AMD ), but looks awesome.
Cheers,

J
My System SpecsSystem Spec
17 Jan 2013   #358
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Juan, did you get everything you needed?
My System SpecsSystem Spec
17 Jan 2013   #359
Bungee18

Windows 7 Ultimate x64 SP1
 
 

Yes Steve, thank you.
The package with the MX-2, the Arctic clean and some other last minute additions has just arrived.

One more question regarding the H100. Both you and Alan told me, in another thread, that you got better results by pushing cool air IN through the radiator, and maintaining positive air pressure, rather than pushing air from inside the case through it.
My only concern with this setup is dust. Would it impact performance much if I attached air filters (aluminum mesh, not extremely restrictive) on the bottom of the radiator or on top of the fans? Of course I would have to clean them on a regular basis. All my other intakes are filtered, and so far the case has stayed pretty clean.

Thanks again Steve.

J
My System SpecsSystem Spec
17 Jan 2013   #360
ganjiry

Win7 Home Premium x64 SP1
 
 

@ Bungee, I have the fans on my H100 pushing air from inside the case up through the radiator but my rear fan is set as an intake. I get good temps and dust isn't a problem aslong as i clean the filters. I've not tested the other way around though.
I think it all depends on your case and other fans which makes the difference. everyone's setup is slightly different in some way but the difference in temps is not going to be major anyway really
My System SpecsSystem Spec
Reply

 Post Your Overclock! [2]




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Post Your Overclock!
Here you can Post your Overclocks and Benchmark results! I have added download links for your convenience. Latest GPU-Z v0.3.7 Latest CPU-Z v1.52 3DMark Vantage Download here!!
PC Custom Builds and Overclocking
HELP ME i HAVE NEVER OVERCLOCK TELL ME HOW
Hello Sevenforums,I would like some other opinions on this subject please. Latley there have been many post showing up from people who have NEVER overclocked there processor wanting someone to give them step by step instructions to achieve this gole. I fully understand the excitment because it...
PC Custom Builds and Overclocking
Help me overclock!!
Hey, I'm trying to overclock my Computer in order to play Battlefield 3 at ultrahigh setting flawlessly, I barely got any overclocking experience, and when i overclock to 3.6ghz my computer crashed and turned off while playing battlefield 3. Apparently they told me i didnt overclock right and it...
PC Custom Builds and Overclocking
Could you help me overclock my cpu?
Hi guys. Before we start, i would like to thank you for your time and help :) So my system is: CPU - Intel Pentium 4 1.6a(northwood) FREQUENCY-1.6ghz; L2-CACHE-512kb; FRONT_SIDE_BUS-400 MT/s; MULTIPLIER-16x; VOLTAGE-1.475V; SOCKET-478 RAM - Kingston 2x512mb(total 1gb) DDR (one of them i think...
PC Custom Builds and Overclocking
overclock
i have a geforce 880GTX graphics card i overclocked the core clock from 592 mhz to 632mhz memory clock 921mhz to 1053 mhz i am wanting to know how can i know if overclocking it to this is ok is there any signs that tell you you've overclocked too much
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:12.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App