Post Your Overclock! [2]

Page 51 of 123 FirstFirst ... 41495051525361 ... LastLast

  1. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #501

    I hope your health and head get better mate! Don't make me come over there!
      My Computer


  2. Posts : 3,118
    Win7 Home Premium x64 SP1
       #502

    Britton30 said:
    I hope your health and head get better mate! Don't make me come over there!
    Cheers chap but i'm sound and will soldier on through as always
      My Computer


  3. Posts : 3,118
    Win7 Home Premium x64 SP1
       #503

    Here's my latest cpu oc based on some suggested settings from Solarsunshine. It still needs some tweaking though but it's stable so far.
    Cpu multi = 20.5, Fsb = 219, Vcore = 1.452. Llc = High
    Cpu/nb = 2417@ = 1.250v, llc = High
    HT Link freq = 2417 @ = 1.212v
    Mem freq = 1756 @ 1.50v

    Cinebench Score
    Cpu = 5.46
    Open GL = 50.30.
    Thats a couple of points down on previous scores though so gotta get my thinking cap on..
    Attached Thumbnails Attached Thumbnails Post Your Overclock! [2]-cpuz-4.5ghz-fsb-oc.png   Post Your Overclock! [2]-cpuz-mem.png   Post Your Overclock! [2]-maxxmem.png   Post Your Overclock! [2]-wins-mem.png   Post Your Overclock! [2]-ibt-4.5ghz.png  

    Last edited by ganjiry; 19 Apr 2013 at 00:36.
      My Computer


  4. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #504

    Great job on your RAM Ryan.
      My Computer


  5. Posts : 3,118
    Win7 Home Premium x64 SP1
       #505

    Britton30 said:
    Great job on your RAM Ryan.
    Cheers chap
      My Computer


  6. Posts : 5,915
    Windows 10 Pro X64
       #506

    Looking good Ganjiry
      My Computer


  7. Posts : 3,118
    Win7 Home Premium x64 SP1
       #507

    After a bit of tweaking but not fully stable as its failing on the second pass of IBT
    Attached Thumbnails Attached Thumbnails Post Your Overclock! [2]-cpuz-validation-4.6ghz.png   Post Your Overclock! [2]-cpu-4.6ghz.png   Post Your Overclock! [2]-memory-1758mhz.png   Post Your Overclock! [2]-cinibench-cpu-score-4.6ghz.png   Post Your Overclock! [2]-maxxmem-1758mhz.png  

      My Computer


  8. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #508

    ganjiry said:
    After a bit of tweaking but not fully stable as its failing on the second pass of IBT
    LLC should be fixing that you should have the option of putting optimization in effect as that is the power settings and power delivery fast you pretty much have the same bios but not the same chip so ......

    yours won't do it unless you pump something like 1.47volts usually I wouldn't say match volt to speed but it seems that way with AMD 1.46 v-core should put 4.6 ghz stable with LLC high both turbo off spread spectrum off I can't even remember all my tweeks unless I go into bios and look but for the sake of showing overclocks here is mine
    Attached Thumbnails Attached Thumbnails Post Your Overclock! [2]-valid.png  
      My Computer


  9. Posts : 3,118
    Win7 Home Premium x64 SP1
       #509

    Solarstarshines said:
    ganjiry said:
    After a bit of tweaking but not fully stable as its failing on the second pass of IBT
    LLC should be fixing that you should have the option of putting optimization in effect as that is the power settings and power delivery fast you pretty much have the same bios but not the same chip so ......

    yours won't do it unless you pump something like 1.47volts usually I wouldn't say match volt to speed but it seems that way with AMD 1.46 v-core should put 4.6 ghz stable with LLC high both turbo off spread spectrum off I can't even remember all my tweeks unless I go into bios and look but for the sake of showing overclocks here is mine
    I think it maybe down to the bios i'm using (1301). PWM Phase control is locked to extreme for some reason. Plus i have a few little bugs with the cpu/nb voltage and llc that is known on this bios or some say early boards shipped with bios 0404 which mine was.
    On the cpu llc i need to set it ultra high to get a stable voltage.
    With high llc i can set 1.472 in the bios which will give me 1.452-1.464 @ idle and drooping to 1.440 under load hence IBT not passing the second run. Ultra high tightens up the difference and has so far been the most stable although i haven't tried it yet on these settings.
    I'll lower the vcore and raise the llc to ultra high which should give me the same voltage but shouldn't droop below 1.452 i think.
    Cpu/nb llc is not right though as if i set 1.263 in the bios it will give me 1.263-1.277 idle and anything upto 1.310.
    Although temps are not an issue i don't want to be putting more voltage through it.

    Edit: Nice oc chap Fairplay!
    Last edited by ganjiry; 27 Apr 2013 at 11:23.
      My Computer


  10. Posts : 2,973
    Windows 7 Professional 64bit SP1
       #510

    Using Cinebench and MaxxMem for the first time on this rig.......no idea how these stack up!

    Post Your Overclock! [2]-cinebench-results.jpg Post Your Overclock! [2]-maxxmem-results.jpg
      My Computer


 
Page 51 of 123 FirstFirst ... 41495051525361 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:01.
Find Us