Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock! [2]

22 Jun 2013   #611
ganjiry

Win7 Home Premium x64 SP1
 
 

Nice oc thesouldemon and welcome to Seven Forums.


My System SpecsSystem Spec
.
23 Jun 2013   #612
smarteyeball

 
 

One good thing about winter is you can push the limit a bit further.

Just did an 11 1/2 hr P95 stable run at 4.7ghz @1.296-1.304v actual.

Next step 4.8ghz. So far that's been really temp limited. A few cores nudged low to high 90's...

(Unlike my 2500K, this 3770k is NOT a Golden chip lol. )

Post Your Overclock! [2]-4.7ghz-p95.jpg

Post Your Overclock! [2]-4.7ghz-asus.jpg



The Asus Suite II is actually pretty decent. Good for on the fly tweaks. Although I still 'set' all settings in the BIOS once stable.


My System SpecsSystem Spec
23 Jun 2013   #613
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Nice run, Patrick. Very well done. Your 3770K is not that bad.
My System SpecsSystem Spec
.

23 Jun 2013   #614
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Heck that's real good Patrick.
My System SpecsSystem Spec
23 Jun 2013   #615
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

That is a sweet OC and then you have 3 cards my goodness

You still have issues with your Sli ?
My System SpecsSystem Spec
23 Jun 2013   #616
smarteyeball

 
 

Thanks guys

Tbh If I could get the temps down to my coolest core (never topped 85c) - I reckon there's more in her. Disable HT and Push for 5ghz.

I might even have a look at replacing the DH14 with one of the closed loop WC units. ie NZXT 140, Kraken X60 etc


(Might need a friendly US based member to buy from newegg and ship it to me since the choices are limited here. And more expensive )

Basically it's to give the insides a bit more space. Not have the top card absorbing the CPU heat etc. Then I can put my heat spreader back on one of my modules and see if i can run this kit at it's rated 2666mhz and not 2400mhz. (Although I cant see how a heat spreader would affect that. It's been a frustrating kit like that).

As for SLI, touch wood I've been having a good run. Drivers seem stable and most teething issues are now sorted and it's been running well. The majority of the time I'm in surround (actually works well as a desktop) and aside from a few games that require either detail lowering or widescreen tweaking, most run great.

Temp wise, most games are happy to run with a custom fan profile which keeps the noise down - but there are a few titles that need the fans at 100%

The only niggly issue is that one the cards fans is off balance and clips the card underneath when at high RPM.

I'd like to get it up higher because of the three cards. Eliminate any potential bottlenecks.

My other niggle was sound. After ditching my soundcard and going back to onboard a 2ch - my headphone jack started misbehaving constantly connecting/disconnecting so I went for a Creative 5.1 USB sound card. Should be here tmw. Having the fans at 100% does get annoying at times.

GPU utilization is okay. ~50-70% per card. 99% like dual SLI would be nice, but it's part tri SLI and 'possibly' bottlenecking a little.

Overall, I'm happy with it now
My System SpecsSystem Spec
24 Jun 2013   #617
ganjiry

Win7 Home Premium x64 SP1
 
 

Nice oc Patrick Good job mate.
Good choice to swap out the DH14 it should help the airflow enit.
My System SpecsSystem Spec
24 Jun 2013   #618
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Patrick, I changed my D14 for a Corsair H100, and the D14 did a better job, but just about 3C, so not much to hang your hat on. It may be just a quirk, but I replaced some ram which required me to take the fans off the D14. When replacing them I only got the middle 140mm connected, and decided to wait to put the 120mm on until the next day. Believe it or not, but I got better temps without the 120. Again by not a big margin, but I would never have believed it. Using a closed loop will make the inside of the case look better, but performance wise, the D14 is about the best you will get without custom water cooling. [Official] Delidded ClubDelidding is the only real answer. If I can help, just let me know.

I live in Florida and it gets really hot, so I had no choice but to do water. I think yesterday was the first day of Summer and it's around 38-40C now. Personally, I'd rather do closed loop or the D14. My serious overclocking days are numbered. I wish I didn't have so much money tied up in water, I'd take another route, I think. I have heard some good things about the Swiftech H220. It's at least configurable and capable of adding another rad or GPUs to it. Some of he delidders have seen as much as 30C drops in temps. I guess, no guts, no glory.
My System SpecsSystem Spec
24 Jun 2013   #619
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Why do micro chips cost so much? This might help the understanding the reason.

How a CPU is made - YouTube
My System SpecsSystem Spec
24 Jun 2013   #620
ganjiry

Win7 Home Premium x64 SP1
 
 

Just incase any of you're intrested there is a new R.O.G realbench been made on their forums Introducing ROG Realbench - what is it? [v1.051 NEW DOWNLOAD LINK!]
It maybe a slow download

Here's a screenie of the league table so far. I'm surprised i actually got on it lol. No doubt my name will soon dissapear off the table.


Attached Thumbnails
Post Your Overclock! [2]-realbench240613.png  
My System SpecsSystem Spec
Reply

 Post Your Overclock! [2]




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Post Your Overclock!
Here you can Post your Overclocks and Benchmark results! I have added download links for your convenience. Latest GPU-Z v0.3.7 Latest CPU-Z v1.52 3DMark Vantage Download here!!
PC Custom Builds and Overclocking
HELP ME i HAVE NEVER OVERCLOCK TELL ME HOW
Hello Sevenforums,I would like some other opinions on this subject please. Latley there have been many post showing up from people who have NEVER overclocked there processor wanting someone to give them step by step instructions to achieve this gole. I fully understand the excitment because it...
PC Custom Builds and Overclocking
Help me overclock!!
Hey, I'm trying to overclock my Computer in order to play Battlefield 3 at ultrahigh setting flawlessly, I barely got any overclocking experience, and when i overclock to 3.6ghz my computer crashed and turned off while playing battlefield 3. Apparently they told me i didnt overclock right and it...
PC Custom Builds and Overclocking
Could you help me overclock my cpu?
Hi guys. Before we start, i would like to thank you for your time and help :) So my system is: CPU - Intel Pentium 4 1.6a(northwood) FREQUENCY-1.6ghz; L2-CACHE-512kb; FRONT_SIDE_BUS-400 MT/s; MULTIPLIER-16x; VOLTAGE-1.475V; SOCKET-478 RAM - Kingston 2x512mb(total 1gb) DDR (one of them i think...
PC Custom Builds and Overclocking
overclock
i have a geforce 880GTX graphics card i overclocked the core clock from 592 mhz to 632mhz memory clock 921mhz to 1053 mhz i am wanting to know how can i know if overclocking it to this is ok is there any signs that tell you you've overclocked too much
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App