Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock! [2]

01 Jul 2013   #691
stormy13
Microsoft MVP

Win 7 Ultimate x64
 
 

Thank you. Had to bump the vcore offset up to 0.200, as it seems that with this CPU it is either defaulting on the low side at stock (somewhere around 1.25-1.3V); or the motherboard is reading it low. If it is the second then that is a first for me with an AMD CPU on an Asus motherboard, as all the others I have had in the past were read on the high side and had to set the vcore manually lower. My x4 955 for example I ran with a negative offset as with out it would run at 1.43V+, where is was totally stable at 1.38-1.39 overclocked to 4.0.

Also have my Kingston HyperX 1600 overclocked up to 1866 at the moment, and haven't run into any problems with it so far.


My System SpecsSystem Spec
.
01 Jul 2013   #692
kbrady1979

Windows 7 Professional 64bit SP1
 
 

Finally decided to fiddle with stuff and I got the Realbench program to run. Here be the results:

Post Your Overclock! [2]-realbench-results.jpg


My System SpecsSystem Spec
01 Jul 2013   #693
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by kbrady1979 View Post
Finally decided to fiddle with stuff and I got the Realbench program to run. Here be the results:

Attachment 274702
How did you get away from the Handbrake error ?
My System SpecsSystem Spec
.

01 Jul 2013   #694
kbrady1979

Windows 7 Professional 64bit SP1
 
 

Raised the voltage for the CPU/iGPU a little bit. I know for a fact my OC is stable, tested with AIDA64 and Prime95 for 18 hours, and IBT. This program must be coded funky to throw that error on multiple machines....that's the only explanation I have for it.
My System SpecsSystem Spec
01 Jul 2013   #695
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by kbrady1979 View Post
Raised the voltage for the CPU/iGPU a little bit. I know for a fact my OC is stable, tested with AIDA64 and Prime95 for 18 hours, and IBT. This program must be coded funky to throw that error on multiple machines....that's the only explanation I have for it.
It has to be that because I can't even finish it up with it making my heat rise and then freeze

also I got that handbrake error too I think it needs work and don't consider it a legit bench as of yet
My System SpecsSystem Spec
01 Jul 2013   #696
kbrady1979

Windows 7 Professional 64bit SP1
 
 

I didn't have any heat problems while running the test.........it maxed out at 60*. The only problem I had was during the encoding, Handbrake would crash. I thought it was just the Intel HD 4000 graphics not having enough balls or whatever, but that doesn't seem to be the case.
My System SpecsSystem Spec
02 Jul 2013   #697
ganjiry

Win7 Home Premium x64 SP1
 
 

Nice result on the realbench kbrady
A couple of people that had the handbrake issue said that they needed a tad more vcore on already stable systems. There's an update for it as soon as the Asus techies get time to upload it and judging by the time it took the to fix the forums(months) it will be a while. From what i've read though the update only addresses the visual aspect of it, ie the bloody red text.
My System SpecsSystem Spec
02 Jul 2013   #698
paulpicks21

Windows 7 Professional 64 bit
 
 

You guys inspired me to do a bit of overclocking myself this morning.

All overclocks were tested for stability using Intel Burn Test which as you know is pretty harsh on the system.

Starting with my daily 4.6 OC right up to a **Don't try this at home Tj Max** 5ghz OC.
For the 4.9 and 5.0ghz OC's I needed to turn off Hyperthreading. Obviously much better cooling is required for them, but it was interesting try out.

You can also see the temp and voltage increases required for each speed.

Paul.


Attached Thumbnails
Post Your Overclock! [2]-4.6.png   Post Your Overclock! [2]-4.7.png   Post Your Overclock! [2]-4.8.png   Post Your Overclock! [2]-4.9.png   Post Your Overclock! [2]-5.0.png  

My System SpecsSystem Spec
02 Jul 2013   #699
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

IBT Residuals look good too. Nice.
My System SpecsSystem Spec
02 Jul 2013   #700
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

good job Paul. You did have a core at TjMax at 5GHz and another at 100C.
My System SpecsSystem Spec
Reply

 Post Your Overclock! [2]




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Post Your Overclock!
Here you can Post your Overclocks and Benchmark results! I have added download links for your convenience. Latest GPU-Z v0.3.7 Latest CPU-Z v1.52 3DMark Vantage Download here!!
PC Custom Builds and Overclocking
HELP ME i HAVE NEVER OVERCLOCK TELL ME HOW
Hello Sevenforums,I would like some other opinions on this subject please. Latley there have been many post showing up from people who have NEVER overclocked there processor wanting someone to give them step by step instructions to achieve this gole. I fully understand the excitment because it...
PC Custom Builds and Overclocking
Help me overclock!!
Hey, I'm trying to overclock my Computer in order to play Battlefield 3 at ultrahigh setting flawlessly, I barely got any overclocking experience, and when i overclock to 3.6ghz my computer crashed and turned off while playing battlefield 3. Apparently they told me i didnt overclock right and it...
PC Custom Builds and Overclocking
Could you help me overclock my cpu?
Hi guys. Before we start, i would like to thank you for your time and help :) So my system is: CPU - Intel Pentium 4 1.6a(northwood) FREQUENCY-1.6ghz; L2-CACHE-512kb; FRONT_SIDE_BUS-400 MT/s; MULTIPLIER-16x; VOLTAGE-1.475V; SOCKET-478 RAM - Kingston 2x512mb(total 1gb) DDR (one of them i think...
PC Custom Builds and Overclocking
overclock
i have a geforce 880GTX graphics card i overclocked the core clock from 592 mhz to 632mhz memory clock 921mhz to 1053 mhz i am wanting to know how can i know if overclocking it to this is ok is there any signs that tell you you've overclocked too much
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App