Post Your Overclock! [2]

Here are shots from Click Bios. I have everything pretty much on Auto except the Core voltage @ +.06. I do not have some of the other settings you have such as vdroop and digi something. I set my Bios like this and can boot at 4.6 at the highest, the other overclocks I have are software assisted with Intel Extreme Tuning Utility. I hope this helps you

Dude said:

Here are shots from Click Bios. I have everything pretty much on Auto except the Core voltage @ +.06. I do not have some of the other settings you have such as vdroop and digi something. I set my Bios like this and can boot at 4.6 at the highest, the other overclocks I have are software assisted with Intel Extreme Tuning Utility. I hope this helps you

Ahh good old MSI Bios don't miss it one Bit looking good Doug

Solarstarshines said:

Dude said:

Here are shots from Click Bios. I have everything pretty much on Auto except the Core voltage @ +.06. I do not have some of the other settings you have such as vdroop and digi something. I set my Bios like this and can boot at 4.6 at the highest, the other overclocks I have are software assisted with Intel Extreme Tuning Utility. I hope this helps you

Ahh good old MSI Bios don't miss it one Bit looking good Doug

Yeah it is frustrating. I did not know they took out offset, and went with vdroop on the last few board generations. They might have brought it back for Haswell, but I'm not going that route, I am happy with my mighty little board, but will go Asus as soon as I can. Guess I was out of the game for a little to long and didn't do enough research before I came back in. I was really suprised I could get the OC I did, even though it was software induced. I prefer being able to do it from the BIOS. The other settings that AddRam has in his Bios should be able to let him OC higher. Here is some info from the MSI forums

http://forum-en.msi.com/index.php?topic=161966.0

Dude said:

Solarstarshines said:

Dude said:

Here are shots from Click Bios. I have everything pretty much on Auto except the Core voltage @ +.06. I do not have some of the other settings you have such as vdroop and digi something. I set my Bios like this and can boot at 4.6 at the highest, the other overclocks I have are software assisted with Intel Extreme Tuning Utility. I hope this helps you

Ahh good old MSI Bios don't miss it one Bit looking good Doug

Yeah it is frustrating. I did not know they took out offset, and went with vdroop on the last few board generations. They might have brought it back for Haswell, but I'm not going that route, I am happy with my mighty little board, but will go Asus as soon as I can. Guess I was out of the game for a little to long and didn't do enough research before I came back in. I was really suprised I could get the OC I did, even though it was software induced. I prefer being able to do it from the BIOS. The other settings that AddRam has in his Bios should be able to let him OC higher. Here is some info from the MSI forums

WHY No Vcore voltage Offsets?

I never used the Oc Genie or MSI control center just seemed wrong and the actual bios was locked at 1.44volts it was killing me I couldn't get a stable 4.5ghz on a 8120 without maxing the bios voltage and putting on APS on ACTIVE PHASE SWITHCING

I don't use OC genie, it will only go to 4.2 anyway. Control center works somewhat, but the Intel Extreme Tuning utillity allowed me to add some voltage, that is the only way I could OC to 5ghz. But I can use auto settings in the bios and run 4.6 which isn't bad

What board does AddRam have?

EDIT: never mind. I did what I should have done in the first place, I looked it up.

Hello, Bulldog and welcome to the forums. If you are interested in overclocking you may want to give this a read through. You will probably find some helpful info.
Official Seven Forums Overclock Leader boards

Ello Bulldog and welcome to Seven Forums
Nice oc mate, there's noubt wrong with 4.4Ghz

Hiya Mr. Bill. It takes a bit of craziness to overclock anyway, you'll be fine here.