New
#321
The rig isn't getting the full force of the vent as it spreads the heat out 180*, and I can't really move the PC from where it is now. The heat on does raise the temp about 2-3* though, but it doesn't run all the time. It's just enough to not be within margin of error, but nowhere near enough to bother me. I can lower the voltage and probably drop it a couple of degrees.....that's what I love about this setup, so much flexibility.
Actually, the vent does have a switch to adjust airflow, instead of deflection, I may be able to make a reduction! Thanks for getting the gears turnin....will see if it makes a difference. It doesn't need to be wide open anyway, I NEVER get cold in this part of the house.
Voltage looks pretty good already Dave.
How come the 4545? You got the BCLK at 101 or something?
Ya, just checking out the new BIOS
That's just walking up the multi, at 4.4 had to give a little vcore bump. Still need to lower it and do some testing.
Haven't changed any other settings, besides setting the Ram to spec.
wow 5.ghz. i can get up to 4.9ghz on my 2600k / Asus p8p67 1.45V straight on 100 x49. not stable at 100% :X but can browse or play game for a while. reaching 65C max with corsair h100
Edit : got up to 5ghz. 1.52V. quite stable , ran Prime for 10mn but temp was getting way too high // 80C,
Last edited by d4ph0d; 06 Jan 2013 at 09:16.
Those temps are pretty low, did you check them with another program?
Like RealTemp.
If it's accurate, you should go to +5GHz.