Show Us Your Rig [4]


  1. Posts : 537
    Windows 7 Ultimate x64 SP1
       #1501

    Thanks Alan!
      My Computer


  2. Posts : 26,863
    Windows 11 Pro
       #1502

    Congrats on the badge. While not being an expert, I've heard the order makes little difference. I've run mine both ways. As long as the res is above the pump, order does not matter a lot. Most people say pump to block to rad back to res. many think that the coolest the water will ever be is when coming from the rad, so run to the rad and from there to the block. I have run mine both ways and see little difference. Keep the res pretty full especially while leak testing. As the air gets out of the system the water level will drop a little. I leak tested mine for 24 hours, but I personally believe Michael was right. If you have no leaks after a couple of hours, it probably won't happen. Having said that, I always leak test for at least 24 hours. My last one I tested it for 36 hours (I wear both a belt and suspenders).

    Actually, I believe that after running it for 30 minutes or less, the water temp is the same through out the entire system. While testing, tilt the computer backward and forward and side to side every once in a while to try to get all the air out. I do that and turn it off occasionally for 5 minutes and back on. It helps get the air out better. Air in the system will hurt the cooling. It may take several weeks to get all of it out, but the majority should come out within the first hour or two. Hope this helps.
      My Computer


  3. Posts : 53,363
    Windows 10 Home x64
       #1503

    Congrats Juan

    A Guy
      My Computer


  4. Posts : 26,863
    Windows 11 Pro
       #1504

    Grass fed sounds like BS to me. Oops, that's A guy.
      My Computer


  5. Posts : 537
    Windows 7 Ultimate x64 SP1
       #1505

    Thank you Steve, I will follow yours and Alan's advice.
    How does the air get off the system if the res cap is locked tight? Or should I do the tilting thing with the cap off?
      My Computer


  6. Posts : 537
    Windows 7 Ultimate x64 SP1
       #1506

    A Guy said:
    Congrats Juan

    A Guy
    Thank you Bill!

    Btw, how do I get my sig to show in a larger size! Jerry's awesome work can't be appreciated in such a small size, and after yo comment in the sig thread I noticed it is only 433x100...

    Cheers,

    J
      My Computer


  7. Posts : 537
    Windows 7 Ultimate x64 SP1
       #1507

    Never mind Bill, I got it working. Thanks
      My Computer


  8. Posts : 53,363
    Windows 10 Home x64
       #1508

    Bungee18 said:
    Thank you Steve, I will follow yours and Alan's advice.
    How does the air get off the system if the res cap is locked tight? Or should I do the tilting thing with the cap off?
    There is an air space on top of the reservoir right? The space on top would just be larger if any air in the system worked it's way there

    A Guy
      My Computer


  9. Posts : 537
    Windows 7 Ultimate x64 SP1
       #1509

    Thanks Bill!

    J
      My Computer


  10. Posts : 26,863
    Windows 11 Pro
       #1510

    Bill is most likely right. He usually is, but I leave the cap to the reservoir off during leak testing. No scientific reason, I just do.

    EDIT: I'm sure you know this, but never ever let the pump run without water (Cavitate, just so you know I know some big words.) for even 5 seconds. You'll be buying a new pump. Know where the intake line is and keep the water above it.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:47.
Find Us