Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Show Us Your Rig [4]

06 Dec 2012   #691

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate SP1 X64 (Windows 8.1, Linux Mint, Windows XP and others in VM)
 
 

Quote   Quote: Originally Posted by Lady Fitzgerald View Post
Quote   Quote: Originally Posted by essenbe View Post
Thanks but those aren't the ones. We were referring to the blue covers on the PCI-e sockets.
Something like these or these?

My System SpecsSystem Spec
.

06 Dec 2012   #692

Windows 7 64 bit SP1
 
 

But Frozen CPU does have them. I think this is the set I got:

Lamptron Advanced Slot Protector Kit Version II - DDRII & DDRIII - UV Blue (SP2) - FrozenCPU.com
My System SpecsSystem Spec
06 Dec 2012   #693

Desk1 8 Pro / Desk2 7 Home Prem / Laptop 8.1 Pro all 64bit
 
 

Quote   Quote: Originally Posted by ganjiry View Post
Quote   Quote: Originally Posted by linnemeyerhere View Post
ganjiry, Black case is the Corsair Carbide 400R
Very similar to the 500R enit

@ ICit2lol, I think i saw a couple of your threads when you were struggling. Glad you got it sorted
Yes mate I was it was a jungle in there and as I said if not for my mate it would gathering dust in the corner. I am just a bit too gung ho for my own good
My System SpecsSystem Spec
.


06 Dec 2012   #694

Desk1 8 Pro / Desk2 7 Home Prem / Laptop 8.1 Pro all 64bit
 
 

Quote   Quote: Originally Posted by linnemeyerhere View Post
Might I suggest a sealed water system, so many good ones out it really all depends on the case and available mounts which you have a great 240mm option in the top and of course the 120mm out the rear of the case. Check out my systems
Attachment 244468

Attachment 244469

Attachment 244470

Attachment 244471

Attachment 244472 pictures for ideas.
Corsair Hydro H70 CORE Liquid CPU Cooler and Corsair SP120 Performance Edition Fan Twin Pack Bundle CW-9060002-WW Bundle at TigerDirect
Hum nice rig linne I am intrigued by the orientation of the LC - mine I just curled around to keep the thing tidy and looking at yours I could have perhaps mounted the rad under one of the top 200 mm's and routed the tubes back to the back panel and then up hugging the back panel up to that rad.
Just as a matter of interest does that orientation affect the dissipation of heat from the rad as it seems mine is only three quarters full and I can imagine inside the liquid lying only on one side of the rad cooling fins.
But all in all I was just really impressed - not that I am any great builder or expert!!

If I get any boring days might be worth a try
My System SpecsSystem Spec
06 Dec 2012   #695

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

ICit2lol,
The pictures are actually three different systems but they all share a common top mount orientation. As far as I can tell these sealed systems all are purged of as much air as possible as an air bubble could cause the pump to cavitate. I've played with single fan as well as push pull fans in both a case air exhaust or cool air intake fan orientation. Currently I'm forced to use my 240mm rad with 2 fans in a pure outside air pushed through the radiator and into the case then the 140mm rear case fan will pull that warm air out the back. This is working very well for me but each case and set up can vary some. The three prior set ups with an H50 then and H100 I exhausted case air out with best results or the same cooling results.
My System SpecsSystem Spec
07 Dec 2012   #696

Desk1 8 Pro / Desk2 7 Home Prem / Laptop 8.1 Pro all 64bit
 
 

Hum well perhaps the space inside my rad is a vacuum because I do remember shaking it before I installed it and it rattled just like you get with a bottle that is about three quarters full, or if you can imagine the fluid coming to that welded joint of the fins and top tank?? if you held the rad upright.

If there is not supposed to be any rattling then maybe I have lemon rad??
My System SpecsSystem Spec
07 Dec 2012   #697

Win7 Home Premium x64 SP1
 
 

Both Corsair Hydro's i've owned have not been totally full. Would'nt it restrict the flow of the coolant if no air at all was in there??
My System SpecsSystem Spec
07 Dec 2012   #698

Desk1 8 Pro / Desk2 7 Home Prem / Laptop 8.1 Pro all 64bit
 
 

Quote   Quote: Originally Posted by ganjiry View Post
Both Corsair Hydro's i've owned have not been totally full. Would'nt it restrict the flow of the coolant if no air at all was in there??
No ganjiry when I did plumbing with my Dad years ago gravity fed hot water systems depended on being totally air free - it always had what is know an expansion pipe from the the main hot water tank that not only carried away water that expanded and may have caused the hot water cylinder to burst but also to relieve / purge the system of air because air bubbles however small restricted the flow of water from the heat source to the holding tank where it eventually lost temperature and returned to the system heat source to be reheated.
Now of course we do have a pump driving a LC and that does alleviate that problem to a certain extent but I am wondering if my system contains say at least one fifth of the rad - air then it would mean that the pump would have to work hard to drive the water / liquid over the top of the finned core unit to the "header" tank and thence return back down it once cooled.
Which also brings into speculation that if that flow was fast how much actual cooling would be effected? In actual fact if you were to us the same circulatory set up in a car I wonder how ell it would work or at all? as it works on a pump thermo syphon principle.
My System SpecsSystem Spec
07 Dec 2012   #699

64bit Windows 7 Ultimate
 
 

As far as I am concerned with a pure liquid cooled system there should never be air in the loop. I am refering to the self built system as with my system, there should never be air in the loop, and you should dip and lift the case to get rid of all the air before seeling it up again. Not sure if its the same with your pre-built waterblock systems. But I believe the same applies imho.
My System SpecsSystem Spec
07 Dec 2012   #700

Win7 Home Premium x64 SP1
 
 

Cheers chaps. Learn something new every day
My System SpecsSystem Spec
Closed Thread

 Show Us Your Rig [4]




Thread Tools



Similar help and support threads for2: Show Us Your Rig [4]
Thread Forum
HDDs Show in BIOS, But Do Not Show in Disk Management Hardware & Devices
show us your dog Chillout Room
backup files will only show up if i click show hidden files and folder Backup and Restore
Show Us Your Rig [3] PC Custom Builds and Overclocking
Changing when taskbar icons show and don't show. Customization
Show Us Your WEI (2) Performance & Maintenance
show hidden folders show file extensions thru registry General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:57 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33