New
#441
ello chaps
im just about to get crackin on this but wanted to just run this by you. ive just opened up speccy and it gives me the same readings as hardware monitor for the voltages and wondered if they are ok before i go any further.
these are the voltage readings while idling
+12V 11.731 V
+5V 4.914 V
CPU CORE 1.332 V
VIN3 1.656 V
VIN4 0.336 V
+3.3V 3.147 V
VIN6 0.144 V
VIN7 2.244 V
VIN8 1.704 V
this while running the gpuz render test in full screen for sli.
+12V 11.681v
+5V 4.914v
cpu vcore 1.332
VIN3 1.656V
VIN4 0.336V
+3.3V 3.147V
VIN6 0.144V
VIN7 2.244V
VIN8 1.704
aida always showed them higher than this.closer to the suposed voltage. from what ive read the exceptable range is 5% drop?
there is no artifacting/tearing while running the render test.
sorry for posting it hear and if need be i'll start a new thread if/when the time comes
cheers chaps
heres the gpuz log while it ran https://dl.dropbox.com/u/26253730/GP...nsor%20Log.txt