GB Mods ( cheap yet effective mods )

I would do it on this weekend as i am running out of thermal paste now ......... Plus i need some conductive material for BSEL mod

ok, good luck

Another good thing!
I again flashed my nvidia 9500gt bios to increase voltage to 1.13 . ..( as my overclock were not stable)
And found to things
1 . The driver is bottle-necking my overclock not the voltage ...............
2 . I HAVE JUST UNLOCKED ADJUST VOLTAGE MODE FOR MY 9500GT

I WANT every viewer to promote this thread as there are 100 of people out there who want cheap and effective mods and i think i m doing a little good for free .................
________________________________________________________________
Comments are MUST ! ! !

OK new improvement !!!
in the above posted pic you can see my OC i.e
core =680 shader = 1700 memory = 450
And i mentioned that it wasn't stable due to driver ..... I was 100% right HOW??
1> having nvidia 301.42 driver it wasn't stable on those clocks.........
2> i degraded to nvidia 296.10 driver it wasn't stable on those clocks.........
3> i upgraded to nvidia 306.23 driver it wasn't stable on those clocks.........
4> i downgraded to nvidia 275.27 IT WORKED STABLE even removed artifacts

SO try try again plus every new thing isn't better ...................

The above trick might not work for every card ! ! !

HEllo every body
TOday i tried Bsel on my processor but failed.It might be either because the conductive material i used wasn't good or my processor was under volted as i was using 800 to 1066 mhz bsel and my processor was to jump from 3.0 to 3.9 ghz . .

SO NEED HELP ! ! !

Hmm, I know we are not using the same cpu or motherboard at all and not sure what voltages you used but for me to use 19x200 mhz I need to have 1.25 vcore and 1.23 VTT/IMC, so you need to increase those 2 quite a bit, but it can be that your never will be stable at that speed either

Andreas W said:

Hmm, I know we are not using the same cpu or motherboard at all and not sure what voltages you used but for me to use 19x200 mhz I need to have 1.25 vcore and 1.23 VTT/IMC, so you need to increase those 2 quite a bit, but it can be that your never will be stable at that speed either

The multiplier is the main PIA . . . . its x15 so if i go for 200 to 266 it will be about 3.9ghz (266x15)
Bsel is really easy as it is to be done on side of processor but without conductive paint or circuit writer pen it is impossible to do VID mode . . .

I did bsel in 5min .I tried about 30 min for VID but i couldn't get it done. . .

ANY IDEAS ???

I will try getting the pen though ! ! !

Never done bsel but all I know is that my motherboard/cpu dont really like me having more then 200 BLCK, any higher and it refuse to boot or get stable no matter how high settings I take, I mean intel's safe settings is max 1.30 vcore and imc/vtt anything above that is not good to have if your not watercooling your machine to help beat the massive heat. Besides I dont even notice any huge benefit from it at all, my games load at pretty much the same speed, only thing I have noticed is that using rar or 7zip is much faster but thats about it, so for me I am not going any higher then 200 BLCK because at that settings my memory run at their rated speeds of 1600

I could'nt find aluminium tape or copper tape or circuit writer pen or silver paint or defogger tape !!!!!!!!!!!!!!!!!!
Any suggestion about a way to do bsel ?????

most hardware shops or car shops will have alluminium tape and the defoger kit, i happen to find some around the house and tied applying it, foil is so fiddly, by any chance could you post a picture of the bsel mod so i can compare with mine as i applied mine but took it off. my pictures are on the other thread