Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: I5 3570K @4.5GHZ - is this ok?

02 Nov 2012   #1
rico798321

Windows 7 Premium 64 bit
 
 
I5 3570K @4.5GHZ - is this ok?

Hi,
Recently rebuilt into an intel system from my old AMD 1100T. I've overclocked the I5 3570K to 4.5GHZ using the Asrock AXTU tuner. I was expecting (and dreading) increasing the voltage however I have not needed to do this? Also my temps using the Nocura DH-14 I installed are only about 40 (28-30 when Idle) when playing Battlefield 3, Crysis etc.

Is this normal or should I increase the voltage? Am I getting the benefit of the overclock? I did try to push it 4.7 but it wouldn't boot. Vcore voltage shows as 1.000V in AXTU and clock speed as 4500MHZ in CPUZ. Specs Below

Asrock Z77 Extreme 4
Intel I5 3570K
HD7970 at 1000/1425.
Ripsaw 1600DDR3 RAM
Samsung F something 1TB HDD
Noctura DH14 Fan.

Im new to Intel chips as i've always had AMD so help and advice is appreciated.

Many thanks


My System SpecsSystem Spec
.
02 Nov 2012   #2
Wishmaster

Windows 7 Home Premium 64bit
 
 

I wouldnt OC using any auto tool. They tend to overvolt everything.
You better off just OCing through the bios, and stress testing/watching temps.

A 4.5-4.6ghz OC should not be too hard to accomplish without much tweaking to voltage.
All CPUs are different so its hard to say how much,if any, extra voltage youll need, but I can pretty much guarantee its less than any Auto OC tool will apply.


For example, with my 2700K, I just turned Vdroop control ON, and set my voltage at 1.25v, as this the ballpark voltage I wanted for 24/7 use.
Then started turning up the CPU multiplier untill it started failing stress tests. I then adjusted Multipliers and/or voltage from there to get the desired OC.

As mentioned all CPUs are different, but doing similar you should find a 4.3 - 4.6OC in that range depending on the chips attidude.
My System SpecsSystem Spec
02 Nov 2012   #3
Pedroc1999

Windows 7 Ultimate x86
 
 

some people say that the best way of overclocking an ivy is to undervolt first as some people think it is too high to start off with,follow his advice and overclock only in the bios, if something goes wrong all you need is to clear cmos but if it from software there is a possibilty of needing to reinstall widnows
My System SpecsSystem Spec
.

05 Nov 2012   #4
kbrady1979

Windows 7 Professional 64bit SP1
 
 

Run CPU-Z and post take a snippet of it for us
My System SpecsSystem Spec
07 Nov 2012   #5
rico798321

Windows 7 Premium 64 bit
 
 

Hi sorry about delay - been busy!!!

Idle (only windows running)
I5 3570K @4.5GHZ - is this ok?-cpuz-non-gaming.png

When Playing BF3
I5 3570K @4.5GHZ - is this ok?-cpugaming.png

Cheers


My System SpecsSystem Spec
24 Nov 2012   #6
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

At idle on the desktop, Intel Speedstep downclocks the CPU to 1.6Ghz. CPUz is not showing the frequency correctly but is showing the voltage correctly. Your CPU will not run 4.5 at .984V. If it does, I'll buy it from you. I agree with everyone else here. Never use software to overclock. Do it manually in BIOS. But first read up on overclocking so you know what the bios settings do.
My System SpecsSystem Spec
25 Nov 2012   #7
rico798321

Windows 7 Premium 64 bit
 
 

Ah I see. What voltage should I increase to in bios?

Thanks for the help - These intel chips are new to me!!!
My System SpecsSystem Spec
25 Nov 2012   #8
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

No one can tell you. All CPUs are different and the other board settings affect it too. There are a lot of overclocking guides on the net. and most boards handle settings different.
My System SpecsSystem Spec
27 Nov 2012   #9
Wishmaster

Windows 7 Home Premium 64bit
 
 

What essenbe said. I agree 100%

But in general, theres really only 3 things you need to do.

Set RAM speed. Usually for its advertised speeds/timings.
You should only need to adjust the CPu multiplier which will be your OC speed. CPU Multi * 100 = CPu speed. I/E if you set it at x45 45x100-4500 or 4.5gz.
And the 3rd setting, should you need it will be CPU Vcore.

Many do things slightly different, but for me I like to leave EIST/Speed step enabled and look for stability with it on, as I believe it to be a very good thing. This way your OC is only active when needed. Others like it turned off. Theres really no right or wrong answer, but more of a preference. But also depends on the OC your trying to achieve.
For example, if you just going for 4.0-4.5Ghz, you can leave it on and get the benefits from it. However, if you want to go fro high OCs, say 4.8 or higher, you may be forced to turn it off to get stability.
But, as mentioned, all CPUs are different so generic advice is really all that can be given. You'll need to test yourself if your CPU/MOBO/RAM combo is happy or not.

theres also another setting, called different things. Essentially, its a Vdroop control. I always set mine to WITHOUT VDroop. It may also be called Load Line Calibration On or OFF. Depends on the motherboard bios.


Please keep in mind, this is just "general" direction. Please, do reasearch and do not randomly start changing things as you can easily destroy your hardware.
Know voltage limits, heat ranges as well as what the settings in your bios do. If you are serious about learning it, theres a wealth of information suited to your exact hardware that will explain each setting in detail.
This will be a good starting point, and by knowing this information you will know what safe ranges are as well as what to and where to look if a problem comes up. It will be worth its wieght in gold later, trust me

Every CPU, RAM kit, and motherboard have thier own little quirks and personalities. I had a older Intel Quad one time that was stable up to 3.6ghz. At 3.7 it would crash and burn. But by bumping the FSB a bit more beyong that "spot", it would run at 4.0Ghz happily.
Some CPUS may just hit a wall at a certain point at thats all they will do, period. Others, will hit a thermal limit before hitting a speed wall and the solution is much better cooling to go further. And then theres some golden (or rare) chips out there that can just pull off remarkable things without blinking an eye. And thats just possibilities from identical chips, just from different batches. Anyway, you get the idea.



But your main 3 for a I/B setup will be: 1) CPU Multi 2) RAM Speed 3) CPU Vcore (slight adjuments - should still be somewhere close to stock)
For a 4.5 or so OC these shopuld be all that need adjusted.

Generally speaking (again each CPU is different) after 4.5, adjustments and setting start becoming more critical for stability.
My System SpecsSystem Spec
29 Nov 2012   #10
rico798321

Windows 7 Premium 64 bit
 
 

Thanks guys - I'll give this a go.

Cheers for the info!
My System SpecsSystem Spec
Reply

 I5 3570K @4.5GHZ - is this ok?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Computer won't recognize 5ghz router (computer has 5ghz), windows 7
My question is I have a computer with 2.4ghz as well as 5ghz, my router is a dual band 2.4 and 5ghz wireless n and no matter what I do my computer will not recognize the 5ghz network. Background info: I have read through many forums and tried many different solutions none of which seem to work....
Network & Sharing
Best CPU cooler for i5 3570k to overclock with?
Hey guys, so recently I purchased a new processor, i5 3570K, and have been getting great speeds with it, but now I want to OC it. Obviously using the stock CPU fan wouldn't do well with overclocking so I wanted to know what CPU cooler I should get that's liquid cooled. I was leaning more towards...
PC Custom Builds and Overclocking
What is this reviewer talking about with reguard to the 3570k ?
As all the other reviews say, this baby runs hot. If you don't have a lot of patience, or the knowledge to de-lid and solder over the cheap paste used on the heat spreader.... It`s a comment from a review on Newegg.
General Discussion
200$ Vga for I5 3570k
Hello, i need video card suggestions for I5 3570k cpu, from what i heard on weaker cards like gtx 460 ( it's older ) it will bottleneck ( correct me if i'm wrong ) So i need a video card that's 200$~ and wouldn't bottleneck if that's possible .. my mobo is asrock z77 extreme4 if it helps.
Hardware & Devices
cpubenchmarks.net says that the FX-6300 is better than the i5 3570k
I was just looking at random cpu's in cpubenchmarks.net and found something really interesting.The FX-6300 is 9 ranks and 301 points MORE than the 3570k. I thought that the FX-8350 was the AMD equivalent. Is it just me or is this actually true?...
Hardware & Devices
2120 or 3570k Gaming
which of these is better in terms of gaming, surfing the web and skype. i know the 2120 has hyperthreading but less cores (2/4) but the 3570k has more cores but no hyper threading. but still has 4 threads(4/4) which one is better
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App