Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New build; Computer not starting up

01 Dec 2012   #1
moneybagman

Windows 7 Ultimate x64 / Windows 8 Pro x64
 
 
New build; Computer not starting up

Having an issue, pretty sure I installed everything as far as hardware correctly. I got everything setup and pressed the power button. I saw the cpu fan and gpu fan turn ever so slightly and then nothing. Now when I try to turn it on, nothing at all happens. The standby power led is on on the motherboard, but even when I short the power prongs on the motherboard, nothing happens.

Help would be appreciated asap, I wanna try out Metro 2033 on my new computer

*Edit*
I took out the gpu and tried it, nothing




My System SpecsSystem Spec
.
01 Dec 2012   #2
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Please disconnect psu power plug and pull all connections and remake same double checking all after pulling the second ram module farthest away from the CPU. Do you have the remaining modual in the #1 slot if not please place it there and try again and report back.
My System SpecsSystem Spec
01 Dec 2012   #3
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Make sure you have both 20 pin and 8 pin mobo power connectors properly seated and on the correct rail on the PSU if applicable.
My System SpecsSystem Spec
.

01 Dec 2012   #4
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Another trick is having the speaker connected so you can listen for beeps and report back.
My System SpecsSystem Spec
01 Dec 2012   #5
moneybagman

Windows 7 Ultimate x64 / Windows 8 Pro x64
 
 

Pulled secondd ram out, disconnected and reconnected everything. Psu power for motherboard is not modular, the only things connected to my motherboard are both power cables, my cpu, my first ram, and my cpu fan. Still not working
My System SpecsSystem Spec
01 Dec 2012   #6
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

PSU is new?
My System SpecsSystem Spec
01 Dec 2012   #7
moneybagman

Windows 7 Ultimate x64 / Windows 8 Pro x64
 
 

Also, i have speakers plugged in. No beeps at all. Only the pop of the speakers when i plug the usb in
My System SpecsSystem Spec
01 Dec 2012   #8
moneybagman

Windows 7 Ultimate x64 / Windows 8 Pro x64
 
 

Psu is brand new
My System SpecsSystem Spec
01 Dec 2012   #9
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Did you make double sure that when placing the CPU that you didn't have any bent pins? I would carefully remove cooler and then the chip and look very closely and if all fine then again carefully re-install the chip and then the fan with the same paste as it hasn't fully seated with heat yet.
My System SpecsSystem Spec
01 Dec 2012   #10
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

If the pins are fine then my gut is saying the PSU could be the issue. That's a great mobo and all the components appear premium but what make and model are the PSU? Do you have access to another PSU to give it a go?
My System SpecsSystem Spec
Reply

 New build; Computer not starting up




Thread Tools




Similar help and support threads
Thread Forum
preposed build log for my new under 5 k computer system build
CASE - Rosewill Gaming Super Tower Computer Case BLACKHAWK-ULTRA primary drive ssd - Samsung Electronics 840 Pro Series 2.5-Inch 512 SATA_6_0_gb Solid State Drive MZ-7PD512BW sound card - ASUS PCI-Express x1 Sound Card XONAR ESSENCE STX/90-YAA0C0-0UAN00Z CPU - AMD FD8350FRHKBOX FX-8350...
PC Custom Builds and Overclocking
Can I install a Corsair H100i on a new build? (starting from scratch)
Hi guys, So I finally received all the goodies for a major overhaul of my rig. New mobo, new CPU, new SSDs, new CPU cooler. Of course I will be doing a fresh Win7 install. My qwuestion, after reading several threads elsewhere, is: can I install my new H100i from the start? Will BIOS see it that...
PC Custom Builds and Overclocking
BSOD when starting computer in morning/bran new computer
Hi, iv decided to get some input to try and resolve this issue im having with my newly constructed PC. i will get straight to the point. i have just put together these new parts. Intel i5-3450 LGA1155 ASRock Z77 Extreme 4 8 gigs ballistix by crucial 2-4gb ddr3 1600 (pc3-12800) radeon...
BSOD Help and Support
Random crash on Win7 Ultimate x64 after starting custom build desktop
I builded a new pc just a few days ago and it crashes after start randomly but usually during surfing on the web .
BSOD Help and Support
BSOD on recently build computer when starting up, error 0x000000f4
Hello, I registered in this forum because of this BSOD problem. It's my first home-made PC and I am a bit concerned bacause of all the BSOD's I'm having. Here's the problem: I start up the pc every morning, I log in on Windows and everything's perfect. I start doing things (openening files,...
BSOD Help and Support
Starting my 2600k build today!
Well after going back and forth if i should do a build, a couple 2600k threads here convinced me it was time lol I am hoping to go 4.4-5ghz range :geek: Just a note, you will notice the low end video card, that was by design, it's just a temp card ;) Here is what I picked up. Motherboard...
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App