Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Overclocking CPU

04 Dec 2012   #11
petko131

Windows 7 x86 Ultimate
 
 

Here are the BIOS pictures




Attached Images
     
My System SpecsSystem Spec
.
04 Dec 2012   #12
petko131

Windows 7 x86 Ultimate
 
 

Quote   Quote: Originally Posted by petko131 View Post
Here are the BIOS pictures
#2 of these pictures


Attached Images
     
My System SpecsSystem Spec
04 Dec 2012   #13
petko131

Windows 7 x86 Ultimate
 
 

Quote   Quote: Originally Posted by petko131 View Post
Quote   Quote: Originally Posted by petko131 View Post
Here are the BIOS pictures
#2 of these pictures
#3 of these pictures


Attached Images
    
My System SpecsSystem Spec
.

04 Dec 2012   #14
petko131

Windows 7 x86 Ultimate
 
 

Quote   Quote: Originally Posted by petko131 View Post
Here are the BIOS pictures
This is how the system is set now, then i changed AI Tuning to manual (5th image and further on), and went through the rest of the menu in order to show you what i see.
My System SpecsSystem Spec
05 Dec 2012   #15
Pedroc1999

Windows 7 Ultimate x86
 
 

Ok. As far as i can see that board is not like ours made today.because you cant fully manually overclock.look for the cpu bus speed and adjust it higher.if you cant find it then just go up another 5%.thing is you will problably not get the best out of the cpu because the best might be 19% or 28% if you know what i mean
My System SpecsSystem Spec
05 Dec 2012   #16
petko131

Windows 7 x86 Ultimate
 
 

Yea, i understand. Just don't know weather to got to "System clocks", or "FSB & memory config". I watched several videos -How to OC, and every bios had a number (don't know what it presents) witch is multiplied with 16, and there you get your CPU frequency.
How can i get to "that number"?
I want to OC my CPU to 3.8-3.9 GHz - is that safe??? don't know much about the voltage settings, but i hope someone will help me (:
today I'm going to run Prime95 for 8-10 hours in "safe mode and networking"

p.s. Since i overclocked my CPU, when i shut down the pc, it installs 3 updates every time. Is that normal?
My System SpecsSystem Spec
05 Dec 2012   #17
Pedroc1999

Windows 7 Ultimate x86
 
 

Go into cpuid and see the fsb.shutdoen pc.go in fsb and memory change the qdr from auto to manual.input a number slighlty higher than the one yoi read in cpuid.reboot.check if the fsb has chanhed in cpuid.if so report back with some pi tures of cpuid
My System SpecsSystem Spec
05 Dec 2012   #18
petko131

Windows 7 x86 Ultimate
 
 

Quote   Quote: Originally Posted by pedroc1999 View Post
Go into cpuid and see the fsb.shutdoen pc.go in fsb and memory change the qdr from auto to manual.input a number slighlty higher than the one yoi read in cpuid.reboot.check if the fsb has chanhed in cpuid.if so report back with some pi tures of cpuid
Don't quite understand this post
My System SpecsSystem Spec
05 Dec 2012   #19
petko131

Windows 7 x86 Ultimate
 
 

I have bought a Arctic Freezer 7 Pro, mounted it, and the temps doped for 15 C, so now i can OC further
My System SpecsSystem Spec
05 Dec 2012   #20
Pedroc1999

Windows 7 Ultimate x86
 
 

Have fun.go untill it wo t boot and keep controlllong the temperature
My System SpecsSystem Spec
Reply

 Overclocking CPU




Thread Tools




Similar help and support threads
Thread Forum
Overclocking GPU
Hey Need some help overclocking my card using Afterburner,so after i saw this Gigabyte GeForce GTX 970 G1 Gaming review - Overclocking The Graphics Card i gave it a try to change the numbers on the sliders but the thing is they will not save for example when i set the Core clock to 150+ as...
PC Custom Builds and Overclocking
overclocking and xmp ram help
Hi, i have tried a few times to overclock to about 3.4/3.6 but my system seems to be unstable. i did not try to mess with too many settings as i am trying to keep it relatively simple however i think the stumbling block may well be my ram as it is set to xmp in the bios. I have read a few threads...
PC Custom Builds and Overclocking
Overclocking GPU
This is just a general question, If the bottleneck on your system is not your graphics card, lets say your ram or cpu is. ( i know this pry varies on the game or app running) Is it still gonna benifit you to overclock the gpu? (lets say on a game that is very gpu intensive) The reason...
PC Custom Builds and Overclocking
i5 750 overclocking
i currently run an i5 quad core desktop with windows 7 home premium. how do i go about overclocking it so that it'll run at 4.16ghz rather than 2.66ghz?
PC Custom Builds and Overclocking
How To: Overclocking Your AMD Processor : Introduction: The Basics Of Overclocking
http://media.bestofmicro.com/CPU-AMD-Overclocking,9-J-180487-1.jpg http://media.bestofmicro.com/CPU-AMD-Overclocking,9-K-180488-1.jpg Tom’s Hardware readers know all about overclocking, of course. In fact, many processor and graphics card reviews would be deemed incomplete without coverage of...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App