Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: I'm new to this is my overclock safe

30 Apr 2013   #11
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Let me give you some specs to adjust but can't promise you they will work the same

AI Tweeker in Bios Change Cpu turbo disabled core control auto

LLC settings for both HIGH load line calibration

Power phase optimized

Power delivery Fast on both

HT when adjusting memory from FSB overclocking it will make this go up you want to keep this between 2400-2600 you can go a little higher but would recommend you stay with in there

As far as the V-core goes if you feel safe jumping back into the oc like you have it then try my voltages at 1.47-1.488 v-core it kinda flexes between the two but more or less 1.488

NB voltage I bumped up .2 volts to stabilize it

all or most other settings leave on auto you can leave the memory unlinked so you can use the HT to make it perform better

make sure to keep spread spectrum off if i left anything out just PM me and we'll figure it out


My System SpecsSystem Spec
.
30 Apr 2013   #12
BigTabs

Windows 7 64 (bit)
 
 

Thank You i have got it stable on 4.5 mhz which is okay cant say its the best but it works i just changed the bus and voltage
My System SpecsSystem Spec
30 Apr 2013   #13
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by BigTabs View Post
Thank You i have got it stable on 4.5 mhz which is okay cant say its the best but it works i just changed the bus and voltage
Ok that is good but like I said more settings then just voltage bumps and bus speeds you need to check out a few tutorials on how this is done here is a Video on overclocking with ASUS AI tweeker


the second video the guy is pretty much on but I do have my own way to overclock but he seems to be pretty much legit with this review
My System SpecsSystem Spec
.

30 Apr 2013   #14
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by kbrady1979 View Post
I don't know because I don't trust the software you are using to monitor them. I do know there is no way all of your CPU cores are exactly the same temperature.
there is only single core sensor that is why unlike Intel that has a sensor for all cores
My System SpecsSystem Spec
01 May 2013   #15
BigTabs

Windows 7 64 (bit)
 
 

thought i would reply to this again from my water cooling thread reason for new Watercoolant is i have had it awhile

temps were inconclusive amd overdrive said to cores were 190c-290-c which if that was right bang nothing would work and i had the pc set to shutdown at 60c

used other software everything was fine temps were A OKAY
My System SpecsSystem Spec
01 May 2013   #16
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by BigTabs View Post
thought i would reply to this again from my water cooling thread reason for new Watercoolant is i have had it awhile

temps were inconclusive amd overdrive said to cores were 190c-290-c which if that was right bang nothing would work and i had the pc set to shutdown at 60c

used other software everything was fine temps were A OKAY
Good to hear had me worried there for a moment MATE so you're still running 4.5 Ghz solid ?
My System SpecsSystem Spec
01 May 2013   #17
BigTabs

Windows 7 64 (bit)
 
 

Yes perfectly fine

Thing is the amd overdrive would report that cores 1-2 are 190c- 290c and all the rest would be fine so I can safely conclude that the temp reader is showing rubbish

Plus it would even say 0.16c on care 1 rest would be normal

I have previously checked the CPU nothing wrong that was my excuse to renew the thermal paste
My System SpecsSystem Spec
01 May 2013   #18
BigTabs

Windows 7 64 (bit)
 
 

AMD Overdrive wrong temp reading really amd overdrive cannot be right


Attached Thumbnails
I'm new to this is my overclock safe-amd-overdrive-wrong-temp-reading.png  
My System SpecsSystem Spec
01 May 2013   #19
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by BigTabs View Post
AMD Overdrive wrong temp reading really amd overdrive cannot be right
looks good but I never trusted speedfan

Hardware Monitor and Core temp are very on point your oc looks good as well anything over 4.6 ghz will need 1,46 1,47 why not try bringing the multi down one and boost the bus a little more AMD chips feed off of the FSB but only do it if you have memory with headroom to do so

http://www.majorgeeks.com/Core_Temp_1.0_RC4_d7258.html

Keep in mind as well bumping the bus bumps the HT so you will have to lower it if you decide to use a little more FSB
My System SpecsSystem Spec
Reply

 I'm new to this is my overclock safe




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Is it safe to use AMD overclock settings...?
Okay, this is probably going to sound like the most noob question, but I've never used any kind of really good graphics card before, and this is in the AMD vision engine control center application, under "Graphics overdrive". My system specs are in my profile, so just click the thing below the...
PC Custom Builds and Overclocking
Is it safe to overclock my radeon hd 5670 with such configuration???
Here is my PC configuration: processor:core 2 duo-4mb cash ram: 4GB graphics card: ATi radeon hd 5670 no cooling system available lots of the games do net give good performance in high graphics configuration. Can i overclock my graphics card without no damage/problem to my card to have...
PC Custom Builds and Overclocking
How much of an overclock is safe on this?
Yo folks, I'm just wondering about this CPU: http://ark.intel.com/Product.aspx?id=40478 and its overclocking capabillities since I'll be buying it tomorrow. A quick question: How much of an overclock (In terms of MHz/GHz ) can I eek out of it using it's stock fan/heatsink?
PC Custom Builds and Overclocking
Do you think i should overclock my RAM and CPU?
http://i296.photobucket.com/albums/mm176/arclord2/Capture3-2.png http://i296.photobucket.com/albums/mm176/arclord2/Capture2-4.png http://i296.photobucket.com/albums/mm176/arclord2/Capture-10.png So since my cpu starting to getting old for the new games,im wondering if i should O/C it...
PC Custom Builds and Overclocking
Safe to Overclock on Stock Cooling?
I have an Intel Core i7 860 @ 2.8 GHz. Is it safe to overclock with stock cooling? :huh: Here's a link to the info on the HP website (I have an HPE-257c): Product specifications HP Pavilion Elite HPE-257c Desktop PC - HP technical support (Africa - English) BTW, I have 3 fans I believe, 2...
PC Custom Builds and Overclocking
How much can I overclock?
How much can I overclock a Phenom II x4 965 Black Edition? The heatsink/fan is the one which came with the processor, my case (Antec 902) has 3x120mm fans and 1x200mm fan. The PSU is 600W How much can I safely overclock this?
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:12.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App