Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: cpu processor pull out while applying thermal paste

24 May 2013   #31
TwoCables

 

Quote   Quote: Originally Posted by ICit2lol View Post
Quote   Quote: Originally Posted by TwoCables View Post
Quote   Quote: Originally Posted by ICit2lol View Post
TC I jested LOL!!
Oh, hence "the pet dog" lol
Sorry mate my slightly warped sense of humour
Slightly. hehe


My System SpecsSystem Spec
.
25 May 2013   #32
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

You should have twisted the heat sink back and forth to break the seal.

I`ve done the same thing.

Live and learn.

But in no way should that have caused a problem.
My System SpecsSystem Spec
31 May 2013   #33
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Personally this guy hasn't showed up since

I think it would be a good time now to either use this information for a tut on what not or what to do in this situation pretty much cut out the fact that it was someone else's thread because it's obvious he abandoned it already

would it be possible to modify this thread for the better good of the forum ?
My System SpecsSystem Spec
.

31 May 2013   #34
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

It will show up in Google searches.
My System SpecsSystem Spec
31 May 2013   #35
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post
Personally this guy hasn't showed up since

I think it would be a good time now to either use this information for a tut on what not or what to do in this situation pretty much cut out the fact that it was someone else's thread because it's obvious he abandoned it already

would it be possible to modify this thread for the better good of the forum ?
Good idea in theory Solar but mate it would cause an avalanche of differing ideas on how thermal compounds should be applied and what compounds should be used.

Have seen in the past threads in here and other forums that are littered with all sorts of ideas and techniques and some that cause strife and tedious debates on the subject. Best left as Gary says and just Google and see the different methods and make ones own mind up.
My System SpecsSystem Spec
02 Jun 2013   #36
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Well, it does happen. Some thermal compounds could be used as glue. I did it to an old AMD rig once, but it caused no damage. I learned to heat the CPU up before removing the heatsink. Makes it much easier. Maybe thermal compounds have improved today where they don't stick as bad, but I still heat the CPU up first.
My System SpecsSystem Spec
Reply

 cpu processor pull out while applying thermal paste




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
After applying thermal paste,now computer beeps & shuts down all of su
My desktop was shutting down because of thermal event. I cleaned everything, applied new thermal paste, after that re installed windows but still it beeps when booting and shuts down all of a sudden. Occasionally it worked for an hour or so flawlessly. If it is again because of overheating it...
General Discussion
Thermal Paste
After reading some good reports on Shin Etsu thermal paste, I bought some, but am having a lot of problems with getting it to spread properly. It tends to clump together, and when forcing it out, it leaves such a thin covering that the lettering on the CPU is still plainly visible. I'm about to...
Hardware & Devices
Cleaning CPU's thermal paste.
Do you guys leave the CPU in the socket? or actually remove the CPU completely? Thanks! :D
Performance & Maintenance
Thermal paste
Hey guys, So I was hoping to get some clarification (as well as personal opinions) on thermal paste application. I have heard many different ways of applying thermal paste, and I am guessing they all work. The real question is, how MUCH? I just have a feeling I put on TOO much on my new...
PC Custom Builds and Overclocking
Thermal paste, not another applying question..
Hey everyone! My first time changing a CPU cooler and I got a few questions besides the application procedure, the questions: 1. Does the paste need to harden before turning on the computer? If yes, how long? 2. How do you know if bubbles develops? Temp spikes? 3. Can I start OC'ing right...
Hardware & Devices
Used way too much thermal paste
This isn't that important, all it is is that I'm worried. It was my first time round putting thermal paste onto a cpu, and i sort of used an entire 3.5g syringe of arctic silver 5 underneath a zalman9700. Yes some did come over the sides, wiped it off, I'm guessing there is a layer inbetween...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App