Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Official Seven Forums Overclock Leader boards

05 Sep 2013   #991
kbrady1979

Windows 7 Professional 64bit SP1
 
 

Looks like you got a winner Gary!


My System SpecsSystem Spec
.
05 Sep 2013   #992
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Best the i7 4770K can do for me. HT is disabled, is that what most of you guys do?

Attachment 284738

I tend to agree Tommy, the do keep issuing updated UEFI/BIOS for Haswell boards.

I never did it is suggested it stays on but like paul said anything over 5 ghz it should be taken off
My System SpecsSystem Spec
05 Sep 2013   #993
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Thanks guys for the advice. Well, my damn ASUS Z87-WS took a dump now!
I was running Furmark and the GPU LED lit up as bright as the sun and smoked. Board won't even post, the BIOS Flashback light keeps blinking even without pushing it.

I think it's time to try Ivy out, suggestions welcome, lol.
My System SpecsSystem Spec
.

05 Sep 2013   #994
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Thanks guys for the advice. Well, my damn ASUS Z87-WS took a dump now!
I was running Furmark and the GPU LED lit up as bright as the sun and smoked. Board won't even post, the BIOS Flashback light keeps blinking even without pushing it.

I think it's time to try Ivy out, suggestions welcome, lol.

I think it's time to get your money back and run Ivy Haswell seems to be a major issue
My System SpecsSystem Spec
05 Sep 2013   #995
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Quote   Quote: Originally Posted by pillainp View Post
Right:

My problems with OC'ing using the built in OC profiles are as follows:

I am repeatedly getting BSOD's when OC'ing above 4.4 GHz. All or most of them seem to indicate that VCore is too low, or that VTT/QPI need to be increased. I have these values set at the defaults applied by the profile. CPU VCore is set by the profile to a fixed value for each OC stage, but I am considering shifting to Offset Mode.

Now my questions are:

1) At 4.4GHz, the automatically applied VCore is 1.168V, and AIDA shows the idle VID as 1.2560V. When running IBT (this is the highest speed I can get it to run at without crashing, currently), VID rises to 1.2660V max (range under load 1.2510-1.2660).
--- What is my Offset and how do I calculate it.

2) What value should I set for VTT/QPI? This board has two values for VTT (VTTCPU1 and VTTCPU2), which may or may not relate to the 2 RAM Channels.

3) What should I set my LLC value to?

BTW, these are the BSOD codes for Ivy Bridge:

BSOD Codes for LGA 1155 Ivy Bridge
0x101 = increase vcore
0x124 = increase/decrease vcore or QPI/VTT... have to test to see which one it is
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r


I've got a bit of the same problem...

But i'm using "GPU Boost" with lucidlogix virtu MVP (iGpu + dGpu) , so i've to set aswell the iGpu load-line calibration to "high" for not getting Blue Screens and those warning "WHEA-Logger" eventID 19.

I'm now using Offset Mode (-) Cpu Offset voltage (0.020) at 4.2GHz, and the VCore CPU-Z is now 1.152V, CoreTemp shows VID 1.2260V.

Those value seems normal to me as it looks by the crash dump codes in screenshot, i was too low with Vcore.

The machine seems far more stable than when i didn't set the iGpu Load-line calibration to "High" => 110%, which increased the Vcore from 0.816V to 1.168V at 4.2MHz (Offset Mode (-) & Cpu Offset Voltage (0.005)).

I have now set at (0.020). i'll increase this value to 0.025, 0.030, 0.035....til it works stable.

I've no choices unless i get rid off multiple display in bios to low Vcore.

That's mean if i go above 4.2MHz, my Vcore will jump high and watts either than average but at least it doesn't crash! (i mean til the board will handle the load)


Attached Thumbnails
Official Seven Forums Overclock Leader boards-capture.png  
Attached Images
Official Seven Forums Overclock Leader boards-capture1.png 
My System SpecsSystem Spec
05 Sep 2013   #996
Dude

Windows 10 Pro X64
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Thanks guys for the advice. Well, my damn ASUS Z87-WS took a dump now!
I was running Furmark and the GPU LED lit up as bright as the sun and smoked. Board won't even post, the BIOS Flashback light keeps blinking even without pushing it.

I think it's time to try Ivy out, suggestions welcome, lol.
Wow, sorry to hear that Gary Your Ivy rub=n will go smooth for you
My System SpecsSystem Spec
05 Sep 2013   #997
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

NoN, you mentioned WHEA Errors. Some people don't worry about them, others do. But if you would like to get an alert when you get one, this is a very good way to do it. Basically to get out of the WHEA errors, raise the Vcore. But to set up the alert, this is an excellent way to know when you get them, it will automatically put an alert on your screen.
WHEA Error Alert Guide (or "How I got out of WHEAville")
My System SpecsSystem Spec
06 Sep 2013   #998
paulpicks21

Windows 7 Professional 64 bit
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Thanks guys for the advice. Well, my damn ASUS Z87-WS took a dump now!
I was running Furmark and the GPU LED lit up as bright as the sun and smoked. Board won't even post, the BIOS Flashback light keeps blinking even without pushing it.

I think it's time to try Ivy out, suggestions welcome, lol.

Sorry to hear that Gary

What happened to the Sabertooth? I didn't think you were changing that in the end.

You could try Ivy, obviously it would be the 3770k and a nice mobo, but if I was you then personally I would hold off just a few more days and try out the Ivy-E i7-4820K which is supposed to have a retail price of around $310 and a nice X79 board to go with it. (I know, I can hear you saying well they ain't out yet and it might be bad as they have not been tested, but with the luck you have been having it can't get any worse! And you might just like it).

Paul.
My System SpecsSystem Spec
06 Sep 2013   #999
kbrady1979

Windows 7 Professional 64bit SP1
 
 

Gary, did all 3 Haswell motherboards go bad?
My System SpecsSystem Spec
06 Sep 2013   #1000
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Well the Z87 Deluxe, Z87 Saber Tooth, and Z87-WS all went bad or didn't work right from the beginning, all returned with the CPUs.
I've went ahead and ordered a Z77 Saber Tooth and i7-3770K and I hope I have as much luck as you all have had with that combo.
My System SpecsSystem Spec
Closed Thread

 Official Seven Forums Overclock Leader boards




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Official Seven Forums Overclock Leader boards [2]
continued from - http://www.sevenforums.com/pc-custom-builds-overclocking/296084-official-seven-forums-overclock-leader-boards.html Updated ;) 0Agh2tKEY2ibedHNZcjRRZUpfUnc0OVNkY0tyTjFpb3c
PC Custom Builds and Overclocking
Home Security Shootout: Which Watchdog is Leader of the Pack?
Read more at: Maximum PC | Home Security Shootout: Which Watchdog is Leader of the Pack?
Chillout Room
Apple the new world leader in software insecurity
Source - Apple the new world leader in software insecurity
Chillout Room


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:22.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App