Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Official Seven Forums Overclock Leader boards

26 Sep 2013   #1541
ganjiry

Win7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Yes Ryan, I think I'll leave them alone.

Maybe.
I don't blame you mate


My System SpecsSystem Spec
.
26 Sep 2013   #1542
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

No, only the pic I posted earlier after the lapping was done. The TIM was a light tan chalky substance that rubbed off with my finger tip. The die is about 5/16th" wide and maybe 7/8th" long and very thin, maybe less than 1mm
My System SpecsSystem Spec
26 Sep 2013   #1543
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

If you just slap some quality paste on it then put it in the pc, it would run much cooler, when I build my daughter`s new rig I`ll do it to my 3570k and see how it does.

It`s a shame you nicked it
My System SpecsSystem Spec
.

26 Sep 2013   #1544
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

I think what I did wrong was trying to use the corner of the blade to get under the IHS on the first corner. You should use the center of the blade's edge and rock it back and forth.
My System SpecsSystem Spec
26 Sep 2013   #1545
ganjiry

Win7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by Britton30 View Post
I think what I did wrong was trying to use the corner of the blade to get under the IHS on the first corner. You should use the center of the blade's edge and rock it back and forth.
That sounds pretty likely and easily done chap...Have a couple of beers and forget it instead of kicking yourself though
My System SpecsSystem Spec
26 Sep 2013   #1546
paulpicks21

Windows 7 Professional 64 bit
 
 

Quote   Quote: Originally Posted by ganjiry View Post
Quote   Quote: Originally Posted by Britton30 View Post
I think what I did wrong was trying to use the corner of the blade to get under the IHS on the first corner. You should use the center of the blade's edge and rock it back and forth.
That sounds pretty likely and easily done chap...Have a couple of beers and forget it instead of kicking yourself though
Good advice there, I will have a beer too to give the old gal the send off she deserves.
My System SpecsSystem Spec
26 Sep 2013   #1547
ganjiry

Win7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by paulpicks21 View Post
Quote   Quote: Originally Posted by ganjiry View Post
Quote   Quote: Originally Posted by Britton30 View Post
I think what I did wrong was trying to use the corner of the blade to get under the IHS on the first corner. You should use the center of the blade's edge and rock it back and forth.
That sounds pretty likely and easily done chap...Have a couple of beers and forget it instead of kicking yourself though
Good advice there, I will have a beer too to give the old gal the send off she deserves.

I'll smoke a fat one on your behalf Gary
My System SpecsSystem Spec
26 Sep 2013   #1548
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by paulpicks21 View Post
Quote   Quote: Originally Posted by ganjiry View Post
Quote   Quote: Originally Posted by Britton30 View Post
I think what I did wrong was trying to use the corner of the blade to get under the IHS on the first corner. You should use the center of the blade's edge and rock it back and forth.
That sounds pretty likely and easily done chap...Have a couple of beers and forget it instead of kicking yourself though
Good advice there, I will have a beer too to give the old gal the send off she deserves.

Ditto Drink up
My System SpecsSystem Spec
26 Sep 2013   #1549
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Thanks Larry. Moe, and Curly.
My System SpecsSystem Spec
26 Sep 2013   #1550
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Yep, just relax...
Nobody at least told, you were a hero deserving a medal for having save the whole world with your money lost on that chip!
My System SpecsSystem Spec
Closed Thread

 Official Seven Forums Overclock Leader boards




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Official Seven Forums Overclock Leader boards [2]
continued from - http://www.sevenforums.com/pc-custom-builds-overclocking/296084-official-seven-forums-overclock-leader-boards.html Updated ;) 0Agh2tKEY2ibedHNZcjRRZUpfUnc0OVNkY0tyTjFpb3c
PC Custom Builds and Overclocking
Home Security Shootout: Which Watchdog is Leader of the Pack?
Read more at: Maximum PC | Home Security Shootout: Which Watchdog is Leader of the Pack?
Chillout Room
Apple the new world leader in software insecurity
Source - Apple the new world leader in software insecurity
Chillout Room


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App