Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Official Seven Forums Overclock Leader boards

14 Aug 2013   #341
kbrady1979

Windows 7 Professional 64bit SP1
 
 

Can you give us a pic while it's under load?


My System SpecsSystem Spec
.
14 Aug 2013   #342
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

I mailed you my result PM IBT

0#68C
1#76C
2#73C
3#73C max load IBT VOLTAGE 1.18 somthing think it's too high ?


Attached Images
Official Seven Forums Overclock Leader boards-max.png 
My System SpecsSystem Spec
14 Aug 2013   #343
kbrady1979

Windows 7 Professional 64bit SP1
 
 

No, that is really low for that clock speed. I PM'd you back, and I'm just thinking these newer IB chips are made a lot better.
My System SpecsSystem Spec
.

14 Aug 2013   #344
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by kbrady1979 View Post
No, that is really low for that clock speed. I PM'd you back, and I'm just thinking these newer IB chips are made a lot better.
Well here is the voltage right here this should be correct


Attached Thumbnails
Official Seven Forums Overclock Leader boards-valid.png  
My System SpecsSystem Spec
14 Aug 2013   #345
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

@Kelly after running IBT


Attached Thumbnails
Official Seven Forums Overclock Leader boards-under-load.png  
My System SpecsSystem Spec
14 Aug 2013   #346
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Tommy, I relly can't tell. CPUz is not reading the voltage right. HW monitor seems to be saying 1.184. If that is right at 4.5, you have a 'golden chip'. Have you tried the fix for CPUz? That's what I go by, but yours is reading speedstep voltage, not the current voltage. All CPU's are different. I usually start with manual voltage and would set it at 1.25 and try that, if I passed 30 minutes of Prime I would drop it to 1.20 and try again, keep dropping it until It wouldn't run it. Then bump it back up .010 and make a full run at prime. If I passed that, convert it to offset and run it again. That's just the way I do it, everyone has their own way. But with manual voltage, what you set is very close to what it will be in prime. That's how you will know exactly what is needed for the chip and board to pass prime. Then convert it to offset and run that way. But, if you are at 1.184, give it a try. It really matters what Vcore goes to during Prime, not what is set in bios. Thus, why I use manual to find my lowest vcore. Offset fluctuates too much.

BTW, to convert use the VID in core temp. Vcore - VID = Offset (+/- .010)
My System SpecsSystem Spec
14 Aug 2013   #347
kbrady1979

Windows 7 Professional 64bit SP1
 
 

That's what I was getting at Steve, the 1.18x voltage he told me about earlier. That is really low. Tommy, something weird, the 3770k @ 4.5GHz should run IBT quite a bit faster. Here is my 3570k @ 4.5GHz...see if you can spot the difference.

Official Seven Forums Overclock Leader boards-ibt-load.jpg

Tommy, did you change anything else in the BIOS after you read that guide? Load Line Calibration, Current Capability, etc?


My System SpecsSystem Spec
14 Aug 2013   #348
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Kelly, I'm pretty sure the 3570 will get more Gflops than the 3770K. I know I was surprised at that when I went from a 2500K to a 2600K.
My System SpecsSystem Spec
14 Aug 2013   #349
kbrady1979

Windows 7 Professional 64bit SP1
 
 

Quote   Quote: Originally Posted by essenbe View Post
Kelly, I'm pretty sure the 3570 will get more Gflops than the 3770K. I know I was surprised at that when I went from a 2500K to a 2600K.
That much more??
My System SpecsSystem Spec
14 Aug 2013   #350
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by kbrady1979 View Post
That's what I was getting at Steve, the 1.18x voltage he told me about earlier. That is really low. Tommy, something weird, the 3770k @ 4.5GHz should run IBT quite a bit faster. Here is my 3570k @ 4.5GHz...see if you can spot the difference.

Attachment 281360
the IBT test maybe because my ram speed i went through that guide Steve gave me read it from head to toe tried some of the setting and that is what i got

@ Kelly if you have the same board what were your settings just curious also my ram is 1600mhz if that makes a difference and the ibt ran that fast on stock so i don't know
My System SpecsSystem Spec
Closed Thread

 Official Seven Forums Overclock Leader boards




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Official Seven Forums Overclock Leader boards [2]
continued from - http://www.sevenforums.com/pc-custom-builds-overclocking/296084-official-seven-forums-overclock-leader-boards.html Updated ;) 0Agh2tKEY2ibedHNZcjRRZUpfUnc0OVNkY0tyTjFpb3c
PC Custom Builds and Overclocking
Home Security Shootout: Which Watchdog is Leader of the Pack?
Read more at: Maximum PC | Home Security Shootout: Which Watchdog is Leader of the Pack?
Chillout Room
Apple the new world leader in software insecurity
Source - Apple the new world leader in software insecurity
Chillout Room


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App