Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Official Seven Forums Overclock Leader boards

01 Sep 2013   #911
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

nice card the 760 is

780's cost as much as a new build damn now that is a monster


My System SpecsSystem Spec
.
01 Sep 2013   #912
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Why are you getting another one ?

I mean, if you think it`s a dog.

And why do you think it`s a dog ?
My System SpecsSystem Spec
01 Sep 2013   #913
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

If that is addressed to me, AddRam, for 2 reasons.
1. My current one is a dog. Requires too much voltage to get over 5. It will do it, but not without a swift kick in the ***.
2. I have 2 Asus V Maximus boards. Right now my second one is running a 2600K, it needs an Ivy Bridge.
OK 3 reasons.
3. Just because I can and don't want Haswell.
My System SpecsSystem Spec
.

01 Sep 2013   #914
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Understood.
My System SpecsSystem Spec
01 Sep 2013   #915
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Of course, Kenseth drove for me.

The RAM is listed for Ivy as 1333 and 1600 because that is what the CPU will run ram at default settings even if you install some faster. Sandy and prior is 1333 and 1066. If you look at the SPD tab of CPUz maximum bandwidth it will show whatever the default setting is for the CPU.

The boards' BIOSes read the SPD (Serial Presence Detect) and give the RAM its initial setting so it will boot the first time, then you can use XMP or manual settings.
My System SpecsSystem Spec
02 Sep 2013   #916
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Quote   Quote: Originally Posted by NoN View Post
Got those warnings since noon and since i've set Offset Mode - / Cpu Voltage .010 to lower a bit the voltage instead of Cpu Volatge to .005.

Should i care about those warnings and set back to .005?

I'm pretty sure it is related to power consumption.

I did ran also a memtest diagnosis 'cause of a previous BSOD from "NTOSKRNL.EXE", and it found no probs at all.
Answering to myself then...

Got to manage that eventID 19, I had to disable EPU in Bios and turn off the EPU switch on Mobo. It was just that Asus power management add-on that was giving warwing ID 19.

As for BlueScreenOfDeath, all is in order now, fixed drivers issues temporarily!
My System SpecsSystem Spec
02 Sep 2013   #917
Dude

Windows 10 Pro X64
 
 

Quote   Quote: Originally Posted by NoN View Post
Quote   Quote: Originally Posted by NoN View Post
Got those warnings since noon and since i've set Offset Mode - / Cpu Voltage .010 to lower a bit the voltage instead of Cpu Volatge to .005.

Should i care about those warnings and set back to .005?

I'm pretty sure it is related to power consumption.

I did ran also a memtest diagnosis 'cause of a previous BSOD from "NTOSKRNL.EXE", and it found no probs at all.
Answering to myself then...

Got to manage that eventID 19, I had to disable EPU in Bios and turn off the EPU switch on Mobo. It was just that Asus power management add-on that was giving warwing ID 19.

As for BlueScreenOfDeath, all is in order now, fixed drivers issues temporarily!

Glad you got it figured out, sorry we didn't help
My System SpecsSystem Spec
02 Sep 2013   #918
kbrady1979

Windows 7 Professional 64bit SP1
 
 

Sorry NoN......I've been in and out here lately and I wasn't able to help you out. If you have any other problems, please send a PM, because I certainly won't miss that. By the way, what are you up to right now as far as your OC, temps, voltage, etc?
My System SpecsSystem Spec
03 Sep 2013   #919
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Came across this last night and thought you OC loonies would be interested LOL!!

Watch from about 14.30 minutes



I thought the temps at the end came up real good
My System SpecsSystem Spec
03 Sep 2013   #920
ganjiry

Win7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by ICit2lol View Post
Came across this last night and thought you OC loonies would be interested LOL!!

Watch from about 14.30 minutes



I thought the temps at the end came up real good
You've got to be brave and willing to lose your cpu when de-liding but it does have good result's if done properly. The biggest temp drop recorded from de-lidding is 30c from what i've read so worth it IF you're really pushing the clock's and willing to kill your cpu if all goes wrong.
There are loads of video's on you tube showing how to do it but most are peeps who don't have a clue what they're doing. I've seen people put a cpu in a bench vice ad use a wooden mallet to knock the blade through the silicone
My System SpecsSystem Spec
Closed Thread

 Official Seven Forums Overclock Leader boards




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Official Seven Forums Overclock Leader boards [2]
continued from - http://www.sevenforums.com/pc-custom-builds-overclocking/296084-official-seven-forums-overclock-leader-boards.html Updated ;) 0Agh2tKEY2ibedHNZcjRRZUpfUnc0OVNkY0tyTjFpb3c
PC Custom Builds and Overclocking
Home Security Shootout: Which Watchdog is Leader of the Pack?
Read more at: Maximum PC | Home Security Shootout: Which Watchdog is Leader of the Pack?
Chillout Room
Apple the new world leader in software insecurity
Source - Apple the new world leader in software insecurity
Chillout Room


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App