Official Seven Forums Overclock Leader boards


  1. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #1811

    N00berG00ber said:
    Paul, you should add the mother board used,ram, and maybe gpu to the chart
    Do have any idea how much work that would involve! TBH that is one of the reasons I added a link to each validation, that way you can look up the full system specs of each person
      My Computer


  2. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #1812

    I appreciate the work you do to keep up the board Paul. I'm sure it takes some time to do the changes.
      My Computer


  3. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #1813

    Britton30 said:
    I appreciate the work you do to keep up the board Paul. I'm sure it takes some time to do the changes.
    Thanks Gary, yeah it takes a little while, especially since I added the links at the end.
      My Computer


  4. Posts : 13,576
    Windows 10 Pro x64
       #1814

    I agree Paul, it`s a thread about Overclocks, not how you got the OC more or less.
    Last edited by AddRAM; 03 Oct 2013 at 10:54.
      My Computer


  5. Posts : 1,486
    Windows 10 Pro
       #1815

    true true.... I was just thinking cause CPU-z gives that's info.
      My Computer


  6. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #1816

    N00berG00ber said:
    true true.... I was just thinking cause CPU-z gives that's info.
    Yeah, CPUz gives it, but for me to compile that into the leaderboards is a lot of work. Basically if you see someones speed that you want to check out in detail, click the link to the right of it and it will take you directly to their CPUz screenshot and you can see it all. :)

    I do need to sort a couple of the links out though as I know they are being directed to the wrong posts, I think there are 2, I will get round to it soon.
      My Computer


  7. NoN
    Posts : 4,166
    Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
       #1817

    This is my second attempt with CPU-Z Validator 3.1.


    4.4GHz => Offset Mode + (0.005), Core Voltage were in CPU-Z between 1.176, 1.184 & max 1.192.
    Temps stayed below 72°C in IBT.

    Dram was DDR3-1600MHz set to Manual, GPU Boost 1300MHz (LLC set to High for Gpu & LLC set to Ultra High for Cpu, phases to extreme w/T.Probe). Locked the multiplier x44 but let Asus MultiCore Enhancement to enabled, average VCore 1.184.

    Next step will be 4.6GHz but i doubt the board will go higher than 4.7GHz!
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards-capture2.png   Official Seven Forums Overclock Leader boards-capture0.png   Official Seven Forums Overclock Leader boards-capture1.png  
    Last edited by NoN; 03 Oct 2013 at 19:50. Reason: adding infos
      My Computer


  8. Posts : 6,075
    Windows 7 Professional 64 bit
    Thread Starter
       #1818

    Good job NoN, temps look good for IBT, I expect you could quite easily get to 4.6GHz at around 1.25v and still have good temps.

    That moves you up the leaderboard 4 places anyway :)

      My Computer


  9. NoN
    Posts : 4,166
    Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
       #1819

    Thank you Paul!

    Was missing a chart value between 4.3 & 4.6!!

    Yes i noticed temps were quite low (very close to what was at 4.2). I might stay at 4.4 for a very little while seeing if its stay quiet even when gaming a bit. Then will attach me to task climbing up to 4.6.

    Temps this morning.
    Attached Thumbnails Attached Thumbnails Official Seven Forums Overclock Leader boards-capture.png  
      My Computer


  10. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #1820

    How is this possible? The minimum temp shown is 14C, which is about 57.4F, my ambient temp is 71F, 22C.

    Official Seven Forums Overclock Leader boards-coretemp-scr.png
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:25.
Find Us