Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Upgraded case - Multiple Issues - Front audio not working + USB cutout

13 Aug 2013   #11
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

If you are using usb 3.0 try usb 2.0


My System SpecsSystem Spec
.
13 Aug 2013   #12
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by DaCheese View Post
Quote   Quote: Originally Posted by Britton30 View Post
If the setup was all well in the old case, I suspect you forgot something in the transfer. It could be a misplaced motherboard standoff is touching the back of the board, a power connector not fully seated, or a loose connector in the front panel as Fireberd said.
The only USB connector i have plugged in is the one that says "USB" and i plugged it into the port "F_USB1"

what is a misplaced motherboard standoff?

COULD IT BE THIS ISSUE: The screws in the motherboard did not line up for only ONE of the holes, so i simply left it with nothing in it, however every other screw lined up correctly , just this one didn't as there was no hole at all beneath it to screw into, so i didn't plug anything into it, could that be the issue?
Yes, standoffs are the tiny brass inserts that go in the motherboard tray to which the board screws go into. you may have one screwed in that does not have a hold for it in the board. There should be six screws total and six standoffs, it's not a full size ATX board.

My System SpecsSystem Spec
13 Aug 2013   #13
DaCheese

Windows 7 Home Premium 64-bit
 
 

Quote   Quote: Originally Posted by Britton30 View Post
Quote   Quote: Originally Posted by DaCheese View Post
Quote   Quote: Originally Posted by Britton30 View Post
If the setup was all well in the old case, I suspect you forgot something in the transfer. It could be a misplaced motherboard standoff is touching the back of the board, a power connector not fully seated, or a loose connector in the front panel as Fireberd said.
The only USB connector i have plugged in is the one that says "USB" and i plugged it into the port "F_USB1"

what is a misplaced motherboard standoff?

COULD IT BE THIS ISSUE: The screws in the motherboard did not line up for only ONE of the holes, so i simply left it with nothing in it, however every other screw lined up correctly , just this one didn't as there was no hole at all beneath it to screw into, so i didn't plug anything into it, could that be the issue?
Yes, standoffs are the tiny brass inserts that go in the motherboard tray to which the board screws go into. you may have one screwed in that does not have a hold for it in the board. There should be six screws total and six standoffs, it's not a full size ATX board.

Hmm alright i'll check in a bit, so i just need to count the screws and unscrew them to make sure they're put in properly? does this mean i have to take everything out
My System SpecsSystem Spec
.

14 Aug 2013   #14
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Yes you'll have to take it all or most of it out. If you have a screw hole in the board but no place for a screw something is wrong. Usually board tray have multiple places to install the stand offs. Lay the board on a piece os paper and mark it with the mounting holes and check to see the case has only the standoffs installed to match them.

You may be able to just remove the cables and your GPU from the board and remove it.
My System SpecsSystem Spec
14 Aug 2013   #15
DaCheese

Windows 7 Home Premium 64-bit
 
 

Ok, i just took it out and checked, i do have 6 screws total, however on the bottom right of the board (if looking from the bottom of pc to top) there is no place for a standoff to fit in the case, so i simply left that one out, but that would total 7 screws?

I moved the USB write into F_USB4 hoping that will fix the problem, any other ideas?
My System SpecsSystem Spec
14 Aug 2013   #16
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

I have circled in red the 6 mounting holes, if you have another hole in the lower right, it's not for mounting.
Is this the correct board?

Upgraded case - Multiple Issues - Front audio not working + USB cutout-91sxncbzuxl__sl1500_.jpg


My System SpecsSystem Spec
Reply

 Upgraded case - Multiple Issues - Front audio not working + USB cutout




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Asus onboard audio no longer working since enabling front panel audio.
My audio rear outs used to work, but even so, i was primarily using hdmi out from my video card. I was also diagnosing BSODs at the time and sent my mobo back to asus for an rma. When it got back, I placed it in a different case and attached the font panel audio. Due to a new living...
Sound & Audio
GA-990XA-UD3 Front Audio - Headphone and Mic - not working
Hello. I have a new, custom build and cannot get the front audio to work. The two USB ports along side the Mic and Headphone jacks work fine. System Specs The motherboard is a GA-990XA-UD3. Chipset AMD RD9XO Rev 02. Southbridge AMD SB10/950 R40. Bios Award Software Ver F8 CPU: AMD Phenom II x6...
Sound & Audio
Front Panel audio not working correctly
When I plug-in my headphones into the front panel jack, the audio will only emit from the left speaker. I haven't tried re-seating my sound card, don't know if it's necessary. Is there anything other than analog output (Xonar DX Audio Center) that I have to change in order for it to work correctly?...
Sound & Audio
Front I/O Audio Jack not working.
Hello, Last month I built my own computer. I am having a problem with my Front I/O audio jacks. - Headset is Beats by Dr. Dre Solo HD - I have went into BIOS and enabled my Front I/O - My front I/O is properly connected to my Motherboard - My driver is Realtek HD R267 (Newest driver)
Sound & Audio
Audio Drivers, VIA Front Panel not working
Hey all, My new Fatality Headset just arrived and i plugged it into the front ports on my PC. Now i know that the ports are controlled By VIA, however in the Sound/Recording Tab it states that nothing is plugged in... I am not sure if this is due to Drivers or me incorrectly plugging...
Drivers
external card, and front audio on pc case
is it possible to hook those 2 up??? or is that for the onboard audio only???
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:15.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App