Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: OC Help


07 Oct 2013   #11

Windows 7 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by N00berG00ber View Post
Quote   Quote: Originally Posted by Solarstarshines View Post
Run a list of the settings you have applied and are you using the latest Asus Bios ?


Also for that speed 4.7 to 4.8 v-core should be around 1,476 to 1,488

Now if you Have LLC adjust it to high and don't touch the NB llc leave it auto

Now as for the temps have you tried reseating the cooler ?? new paste

It is shutting down because it is too hot most likely

Please if you can give us a run down of settings
temps are normal never hits 65C. but at 4.5ghz, I need 1.5V?!?! that's not rite.


LLC is enabled (my only option)
CPU multi is 23
FSB 200
NB 2200mhz - its always been here
HT Link 2400mhz - is always been here (changing voltage dident help or underclocking it)
everything else is set to auto. ill try to reseat the cooler. but I don't think its that? would that cause it to lock up all the time? no matter the voltage?


playing games for hrs and such, no BSOD or lockups. just on prime and intel
When it gets to hot it could freeze before shutting down temps can make a pc act a fool depending on what is causing it

My System SpecsSystem Spec
.

07 Oct 2013   #12

Win 7 Pro x64/Win 8 Pro x64 dual boot
 
 

Quote   Quote: Originally Posted by N00berG00ber View Post
temps are normal never hits 65C. but at 4.5ghz, I need 1.5V?!?! that's not rite.
Maximum temp for an FX series CPU is 61C, IIRC

Someone may correct me on that, but I'm pretty sure that's close.
My System SpecsSystem Spec
07 Oct 2013   #13

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by Mellon Head View Post
Quote   Quote: Originally Posted by N00berG00ber View Post
temps are normal never hits 65C. but at 4.5ghz, I need 1.5V?!?! that's not rite.
Maximum temp for an FX series CPU is 61C, IIRC

Someone may correct me on that, but I'm pretty sure that's close.
my asus alarm goes off at 65C, so I tend to try to stay away from that. while gaming it never got over 48C

I reseated the CPU and Cooler. ima try it now.
My System SpecsSystem Spec
.


07 Oct 2013   #14

Windows 7 Professional x64
 
 

nope. immediate shutdown running prime. let me try intel.
My System SpecsSystem Spec
07 Oct 2013   #15

Windows 7 Home Premium 64bit sp1
 
 

Try a Bios update

I can already tell you that voltage might be the cause you need to drop it down to at least 1.476

You don't need 1.5 if you have llc on the voltage is the culprit
My System SpecsSystem Spec
07 Oct 2013   #16

Windows 7 Professional x64
 
 

Intel very high test got to 1 test done then I stopped it. I tried maximum and it never even got through 1 test and froze. 4.6 at 1.476v
My System SpecsSystem Spec
07 Oct 2013   #17

Windows 7 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by N00berG00ber View Post
Intel very high test got to 1 test done then I stopped it. I tried maximum and it never even got through 1 test and froze. 4.6 at 1.476v
there is something wrong do you have any power states disabled ?
My System SpecsSystem Spec
07 Oct 2013   #18

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by N00berG00ber View Post
Intel very high test got to 1 test done. hen I stopped it. I tried maximum and it never even got through 1 test and froze. 4.6 at 1.476v
there is something wrong do you have any power states disabled ?
I disabled everything.

I've tried with c6 enabled and disabled. Dosent make a difference.

I'm flashing and older bios version now.....

I personally think the board is messed up. i think i see a long very angry talk with asus tomorrow
My System SpecsSystem Spec
07 Oct 2013   #19

Windows 7 Professional (64x)
 
 

So I've had a quick look into this and it seems that AMD suggests 62C.

In that case it's your CPU's safety function stepping in. My recommendation is that you go back to scratch and start over and see at what point the computer starts to act weard and go from there. Also make sure that there is no AutoOC enable as this might only jump in as you are running Prime due to the CPU not being stressed that hard otherwise.

If you think its the Mobo try setting the Clockspeeds to normal and do a test like that. If it does not work then you can be quite sure that its not the CPU.
My System SpecsSystem Spec
07 Oct 2013   #20

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by Legaia View Post
So I've had a quick look into this and it seems that AMD suggests 62C.

In that case it's your CPU's . fety function stepping in. My recommendation is that you go back to scratch and start over and see at what point the computer starts to act weard and go from there. Also make sure that there is no AutoOC enable as this might only jump in as you are running Prime due to the CPU not being stressed that hard otherwise.

If you think its the Mobo try setting the Clockspeeds to normal and do a test like that. If it does not work then you can be quite sure that its not the CPU.
OK, I've tried with stock settings and bios and it was fine. But I only ran it for a few mins. Only got to test 5 in prime before I stopped it.
My System SpecsSystem Spec
Reply

 OC Help




Thread Tools



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:12 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33