Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: OC Help

07 Oct 2013   #31
N00berG00ber

Windows 10 Pro
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post


Ok this guy is overclocking with your board look at what he is doing and compare your settings maybe you will see something you are doing wrong
I have exact same settings.


My System SpecsSystem Spec
.
07 Oct 2013   #32
N00berG00ber

Windows 10 Pro
 
 

Huh.... I set CPU/nb to 2000mhz instead of the stock 2200mhz and no crash.... Running prime now fine at 4.6 1.476v. Let me try and enable LLC for CPU/NB and raise it to 2200mhz...

And crash on 2200mhz... IMA increase voltage a tad....
My System SpecsSystem Spec
07 Oct 2013   #33
N00berG00ber

Windows 10 Pro
 
 

SUCESS! I had to up the voltage a tad. Its stable now. But its late so I will have to fully test tomorrow.

I never had to mess with CPU/nb voltage before. That's why I never thought it would be it. Owell. That also explains why I couldent boot past 5.2ghz no matter the voltage I guess.....

Should CPU/nb llc be enabled?


EDIT: and it shut off....

EDIT: I set the CPU/nb to 1.2v and it no longer freezes immediately, but i dont think its stable either.
My System SpecsSystem Spec
.

08 Oct 2013   #34
N00berG00ber

Windows 10 Pro
 
 

OK so its not shutting off or freezing as soon as I start prime, however now it shuts off after a few mins of prime. No errors, and no lockups. Just shuts PC off. Do you think this is the thermal protection? On my last board running prime, the CPU went above 65c and no shutdown.

Is there something in bios that I can shut off for this just to stress test?
My System SpecsSystem Spec
08 Oct 2013   #35
N00berG00ber

Windows 10 Pro
 
 

I'm going to try and disable spread spectrums and enable HPC mode and give that a try.
My System SpecsSystem Spec
08 Oct 2013   #36
paulpicks21

Windows 7 Professional 64 bit
 
 

Maybe your CPU had degraded as it has had loads of volts chucked through it and it is no longer capable of sustaining a stable oc at 4.6GHz.

You may have to admit defeat and just run a lower daily oc.


Paul
My System SpecsSystem Spec
08 Oct 2013   #37
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by paulpicks21 View Post
Maybe your CPU had degraded as it has had loads of volts chucked through it and it is no longer capable of sustaining a stable oc at 4.6GHz.

You may have to admit defeat and just run a lower daily oc.


Paul

I was thinking the same thing Paul

@NooberGoober Spread spectrum is supposed to be always off you have no devices that would interfere with the electric signals on the pc so it's pointless to have it on

http://en.wikipedia.org/wiki/Spread_spectrum


You can always try the chip you had in it before and see if it does the same thing
My System SpecsSystem Spec
08 Oct 2013   #38
N00berG00ber

Windows 10 Pro
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by paulpicks21 View Post
Maybe your CPU had degraded as it has had loads of volts chucked through it and it is no longer capable of sustaining a stable oc at 4.6GHz.

You may have to admit defeat and just run a lower daily oc.


Paul

I was thinking the same thing Paul

@NooberGoober Spread spectrum is supposed to be always off you have no devices that would interfere with the electric signals on the pc so it's pointless to have it on

Spread spectrum - Wikipedia, the free encyclopedia


You can always try the chip you had in it before and see if it does the same thing
I sold it.

Do u think its OK to leave at that speed and voltage even tho it fails prime? Like I haven't gotten any bsod or lockups. Would it cause performance problems with not prime stable?
My System SpecsSystem Spec
08 Oct 2013   #39
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by N00berG00ber View Post
Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by paulpicks21 View Post
Maybe your CPU had degraded as it has had loads of volts chucked through it and it is no longer capable of sustaining a stable oc at 4.6GHz.

You may have to admit defeat and just run a lower daily oc.


Paul

I was thinking the same thing Paul

@NooberGoober Spread spectrum is supposed to be always off you have no devices that would interfere with the electric signals on the pc so it's pointless to have it on

Spread spectrum - Wikipedia, the free encyclopedia


You can always try the chip you had in it before and see if it does the same thing
I sold it.

Do u think its OK to leave at that speed and voltage even tho it fails prime? Like I haven't gotten any bsod or lockups. Would it cause performance problems with not prime stable?

Well if you feel comfortable go ahead I mean in reality none of those programs will run your pc that hard anyway but when you run premier it might pose a issue since it taxes the cpu and ram gpu
My System SpecsSystem Spec
08 Oct 2013   #40
N00berG00ber

Windows 10 Pro
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by N00berG00ber View Post
Quote   Quote: Originally Posted by Solarstarshines View Post


I was thinking the same thing Paul

@NooberGoober Spread spectrum is supposed to be always off you have no devices that would interfere with the electric signals on the pc so it's pointless to have it on

Spread spectrum - Wikipedia, the free encyclopedia


You can always try the chip you had in it before and see if it does the same thing
I sold it.

Do u think its OK to leave at that speed and voltage even tho it fails prime? Like I haven't gotten any bsod or lockups. Would it cause performance problems with not prime stable?

Well if you feel comfortable go ahead I mean in reality none of those programs will run your pc that hard anyway but when you run premier it might pose a issue since it taxes the cpu and ram gpu

Ya thats what I was worried about... Well see how it goes.
My System SpecsSystem Spec
Reply

 OC Help




Thread Tools Search this Thread
Search this Thread:

Advanced Search



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App