Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Official Seven Forums Overclock Leader boards [2]

18 Nov 2013   #601
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Quote   Quote: Originally Posted by Solarstarshines View Post
Quote   Quote: Originally Posted by NoN View Post
Quote   Quote: Originally Posted by Solarstarshines View Post
NON in your Evo pic I see you are using 1 core ?

I though Oc'ing through EVO you needed to group them and tune together correct me if I am wrong I think that is how I did mine
Hi!

I'm not OC'ing with TurboV Evo that's why i didn't group all cores. Of course i could have done that too!

That's pure bios settings at the moment.

But anyway hitting the 95°celsius is the limit i want to reach...so this might be one of my last OC'ing with that motherboard, unless i try TurboV Evo to make it at 4,8GHz more round!!!
you limit it to 95c gees I am playing it major safe then I never let mine get above 85c I get a panic attack when I see it turn yellow on Core temp running IBT lol lol lol
Plus, i'm not with a watercooler...on airflow with push/pull!

If i decide to mount watercooling i think i'll push it a bit...


My System SpecsSystem Spec
.
18 Nov 2013   #602
paulpicks21

Windows 7 Professional 64 bit
 
 

If you are testing for stability NoN, then you will soon reach a limit especially if you are using IBT. But I think I can safely say most of the top 10 runs on the leaderboard were not 100% stable OC's. I can run 5GHz stable, but temps were very close to the Tj max.
My System SpecsSystem Spec
18 Nov 2013   #603
kbrady1979

Windows 7 Professional 64bit SP1
 
 

Weird things start happening above 4.8/4.9GHz........at least they did for me.
My System SpecsSystem Spec
.

18 Nov 2013   #604
paulpicks21

Windows 7 Professional 64 bit
 
 

Updated

My System SpecsSystem Spec
18 Nov 2013   #605
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Quote   Quote: Originally Posted by paulpicks21 View Post
If you are testing for stability NoN, then you will soon reach a limit especially if you are using IBT. But I think I can safely say most of the top 10 runs on the leaderboard were not 100% stable OC's. I can run 5GHz stable, but temps were very close to the Tj max.
First thanks for updating leaderboard.

I think this particular motherboard might have reach it limits at 4798,88GHz in bios. Maybe i still can OC'ing a little further with the help of Asus software.

Will have for sure to go watercooled the system if reaching those high temps.
My System SpecsSystem Spec
19 Nov 2013   #606
madcratebuilder

Win8/8.1,Win7-U64, Vista U64, uncounted Linux distor's
 
 

Quote   Quote: Originally Posted by paulpicks21 View Post
If you are testing for stability NoN, then you will soon reach a limit especially if you are using IBT. But I think I can safely say most of the top 10 runs on the leaderboard were not 100% stable OC's. I can run 5GHz stable, but temps were very close to the Tj max.
Precisely! Adding a lot of vcore and booting long enough for a few screen shots is not a stable overclock. 8 hours of P95 blend on all cores is a stable clock. My chip can do 4.62 at 1.404 vcore 24/7. I can boot up to 5.2+ but it needs more vcore, and more vcore is adding a lot of heat. I'm happy with 4.6 and a 30C temp.
My System SpecsSystem Spec
19 Nov 2013   #607
Indianatone

Windows 7 x64 Ultimate and numerous virtual machines
 
 

Quote   Quote: Originally Posted by Britton30 View Post
glad to see you up and about Tony. The Hoosier air will do you good, lol.

Watch the temps closely, AMDs can get too hot fast. Use Core temp and set the overheat protection to power down at about 10C before your max temp.
Ohhh you are SO right Gary, I went for a small overclock, disabled all the power saving, cool and quiet etc default voltages and set it for 4Ghz from 3.5Ghz (4Ghz being the turbo speed) and it was absolutely fine. Booted to windows and everything was OK temps were no different about 18C to 20C on idle. I think I have my CPU fans set for silent operation on the push pull Coolermaster Hyper 212, did not think to look. So I threw Prime 95 64 bit at the system on all cores and after about 20 mins or so the temp reached 59C and the Asus Temp monitor tool turned red on the CPU temp and flashing so I stopped Prime and the temps came down rapidly. I'll have to look and see how the fans are configured in the bios, both of them are 4 pin types and shift plenty of air I wonder if water cooling is the way to go? I don't think I'll bother with that, just means I'll have to get a 4Ghz part and upgrade another machine. No matter what I do with this Sabretooth board it defaults to clock the CPU at 3.7Ghz in any case.
My System SpecsSystem Spec
19 Nov 2013   #608
paulpicks21

Windows 7 Professional 64 bit
 
 

FAO Solar,

I got an email today too mate, downloading it now


Attached Thumbnails
Official Seven Forums Overclock Leader boards [2]-ac.png  
My System SpecsSystem Spec
19 Nov 2013   #609
Indianatone

Windows 7 x64 Ultimate and numerous virtual machines
 
 

OK how are these temps. The one I am concerned about is read by CPUID Hardware monitor 64C . Got the fans running better. The temp read by Core temp is 49 - 50 C, which temp is which?


Attached Thumbnails
Official Seven Forums Overclock Leader boards [2]-4-ghz-just-altered-ratio.jpg  
My System SpecsSystem Spec
20 Nov 2013   #610
ganjiry

Win7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by Indianatone View Post
OK how are these temps. The one I am concerned about is read by CPUID Hardware monitor 64C . Got the fans running better. The temp read by Core temp is 49 - 50 C, which temp is which?
The 64c reading is your socket temp and the lower is the core temp. Only use one software to monitor temp's as more than one program polling the same sensor will cause conflict's/miss-reading's. 65c is the max core temp and 70c is the max socket temp for your cpu so you're not going to hurt anything at the temp's you have but as you know the cooler the better.
My System SpecsSystem Spec
Reply

 Official Seven Forums Overclock Leader boards [2]




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Official Seven Forums Overclock Leader boards
The Official Seven Forums Overclock Leaderboards After some discussions between several members, I have created a new leaderboards thread. Obviously there is still the http://www.sevenforums.com/pc-custom-builds-overclocking/251850-post-your-overclock-2-a-73.html thread, but I thought it would...
PC Custom Builds and Overclocking
Home Security Shootout: Which Watchdog is Leader of the Pack?
Read more at: Maximum PC | Home Security Shootout: Which Watchdog is Leader of the Pack?
Chillout Room
Apple the new world leader in software insecurity
Source - Apple the new world leader in software insecurity
Chillout Room


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:52.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App