Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: AI Suite III Voltage

01 Nov 2013   #11
BigTabs

Windows 7 64 (bit)
 
 

Could be the LLC which is auto


My System SpecsSystem Spec
.
01 Nov 2013   #12
BigTabs

Windows 7 64 (bit)
 
 

Might try setting it to a level to help stop spikes in voltage that is all I can think of
My System SpecsSystem Spec
01 Nov 2013   #13
BigTabs

Windows 7 64 (bit)
 
 

Now i'm confused ai suite is showing the vcore instead of the VID that was set
My System SpecsSystem Spec
.

01 Nov 2013   #14
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

I would think it's the auto LLC it goes all over because of the Phase switching you set it to extreme or the setting below it I think it will even out across the board but as long as you are using the HW monitor and AIDA they are basically telling you the truth and would just leave it at that

I doubt all programs read the same anyway and the two you have used you said yourself they were right on target
My System SpecsSystem Spec
01 Nov 2013   #15
BigTabs

Windows 7 64 (bit)
 
 

Can I ask a noob question does LLC CHANGE VCORE
My System SpecsSystem Spec
01 Nov 2013   #16
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by BigTabs View Post
Can I ask a noob question does LLC CHANGE VCORE

It keeps your V-core constant at the same voltage with out droop meaning loss of voltage that is supplied

LLC on auto could use more then what you have it actually set too if you set it to like a med to high range it would be solid and wouldn't add or subtract power it would be 100% locked at that but there is a possibility you would see a .1 to .3 decrease in voltage over time nothing to worry about though if the PSU is solid everything else will be too
My System SpecsSystem Spec
Reply

 AI Suite III Voltage




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
how can i tell how much voltage is enough for the CPU ?
i've been making researches on CPU's temperature , and i remember someone said if the CPU is getting too high voltage the temp will raise ... and i do believe that i can control that in the BIOS , so the question is , how much should be enough ? , im using i3-3220 at 3.3ghz , and usually it runs at...
Hardware & Devices
MSI AB & Voltage
so im trying to get a stable OC for my GPU. ive notices that other people are able to get to 1170MHz on the core at the stock 1.2V. However when i go into GPUz and GPU Tweak, the core reads 1.158V and that is why i can only get to 1140MHz on the core. however in MSI AB, i can not adjust the voltage...
PC Custom Builds and Overclocking
Nokia PC suite and Ovi suite
Hello friends what is diffrence between Nokia PC suite and Nokia OVI suite????
Software
CPU Voltage & CPU VDDA Voltage
Hey guys. I am sort of confused as to why my BIOS has "CPU VDDA Voltage" and not "CPU Voltage". My BIOS version is 1102 (latest). Any help?
PC Custom Builds and Overclocking
RAM Voltage
Hey peeps, Just building my new system and was reading in the manual for the board that Intel says not use RAM over 1.65v. Problem is my RAM is rated to run at 1.85v. I checked in the BIOS and it looks like the system is undervolting but obviously when i start gaming that will volt-up. ...
Hardware & Devices
Ram voltage
The ram i have is supposed to be 1.65 voltige thing,but in the bios it reads a lower voltage,not at home now so cant see exactly what the voltige is,but i know it is lower than 1.65.Now can i push it up to 1.65 or will that be bad or something for the board?
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 20:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App