Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: AI Suite III Voltage

01 Nov 2013   #1
BigTabs

Windows 7 64 (bit)
 
 
AI Suite III Voltage

Just recently noticed when when i'm overclocking my Haswell i7 4770K mobo maximus vi formula

I set manual voltage to the CPU 1.210 the AI SUITE III reports back with a slightly higher CPU voltage if i use a 3rd party software programme CPU voltage is 1.110

Is AI SUITE misleading me

Any help would be fantastic


My System SpecsSystem Spec
.

01 Nov 2013   #2
BigTabs

Windows 7 64 (bit)
 
 

Photos


Attached Thumbnails
-hjkg.png  
Attached Images
 
My System SpecsSystem Spec
01 Nov 2013   #3
Solarstarshines

Windows 7 Home Premium 64bit sp1
 
 

For me the Suite shows either slightly less or a little more then you are actually using it's sort of a toss up have you used HW monitor to check and compare volts and packages ?
My System SpecsSystem Spec
.


01 Nov 2013   #4
BigTabs

Windows 7 64 (bit)
 
 

I'm going to check a couple out. My overclocks are all over the show
My System SpecsSystem Spec
01 Nov 2013   #5
BigTabs

Windows 7 64 (bit)
 
 

Ai suite thumbs down from me rubbish software
My System SpecsSystem Spec
01 Nov 2013   #6
Solarstarshines

Windows 7 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by BigTabs View Post
Ai suite thumbs down from me rubbish software

So were the one's you checked with HW monitor or AIDA did it show the same across the board ?
My System SpecsSystem Spec
01 Nov 2013   #7
mjf

Windows 7x64 Home Premium SP1
 
 

I tend to rely more on HW monitor. But I suggest turning AI suite off when doing so. If you don't AI suite will report silly warning readings in my experience.
My System SpecsSystem Spec
01 Nov 2013   #8
BigTabs

Windows 7 64 (bit)
 
 

Ai suite has a highest of all voltages set by me for example 4.6ghz voltage 1.236 ai suite shows 1.248
My System SpecsSystem Spec
01 Nov 2013   #9
BigTabs

Windows 7 64 (bit)
 
 

AIDA showing set voltage
CPUID HWMonitor shows set Voltage
AI SUITE is well higher than the voltage i have set
My System SpecsSystem Spec
01 Nov 2013   #10
BigTabs

Windows 7 64 (bit)
 
 

CPUID HWMonitor just spiked with 1.168
My System SpecsSystem Spec
Reply

 AI Suite III Voltage




Thread Tools





Similar help and support threads
Thread Forum
how can i tell how much voltage is enough for the CPU ?
i've been making researches on CPU's temperature , and i remember someone said if the CPU is getting too high voltage the temp will raise ... and i do believe that i can control that in the BIOS , so the question is , how much should be enough ? , im using i3-3220 at 3.3ghz , and usually it runs at...
Hardware & Devices
MSI AB & Voltage
so im trying to get a stable OC for my GPU. ive notices that other people are able to get to 1170MHz on the core at the stock 1.2V. However when i go into GPUz and GPU Tweak, the core reads 1.158V and that is why i can only get to 1140MHz on the core. however in MSI AB, i can not adjust the voltage...
PC Custom Builds and Overclocking
Nokia PC suite and Ovi suite
Hello friends what is diffrence between Nokia PC suite and Nokia OVI suite????
Software
CPU Voltage & CPU VDDA Voltage
Hey guys. I am sort of confused as to why my BIOS has "CPU VDDA Voltage" and not "CPU Voltage". My BIOS version is 1102 (latest). Any help?
PC Custom Builds and Overclocking
RAM Voltage
Hey peeps, Just building my new system and was reading in the manual for the board that Intel says not use RAM over 1.65v. Problem is my RAM is rated to run at 1.85v. I checked in the BIOS and it looks like the system is undervolting but obviously when i start gaming that will volt-up. ...
Hardware & Devices
Ram voltage
The ram i have is supposed to be 1.65 voltige thing,but in the bios it reads a lower voltage,not at home now so cant see exactly what the voltige is,but i know it is lower than 1.65.Now can i push it up to 1.65 or will that be bad or something for the board?
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 04:37.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App