Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can you guys help me with using OCCT?


24 Nov 2013   #1

Windows 7 Ultimate x64
 
 
Can you guys help me with using OCCT?

I heard about this benchmark Link - http://www.ocbase.com/ being mentioned over and over so I finally caved in and grabbed it. I turned it on, left all the settings as they were, except for setting the Test Mode to Medium Data Set, as that seems to take up all of my memory. I ran it for 6 minutes, because I just got it and I wanted to post a screenshot of it, so you guys could maybe help me dissect what to look for when testing with this tool. I am interested in stability of my overclock so temps are one of the main concerns. Now I see some temps shown, TMPIN0, TMPIN1, TMPIN2 do you guys know which is which? #2 was the hottest as you can see, so something tells me that is the north bridge, but I could be wrong. Any help in dissecting this and tips on how to run it, and how long to run it are greatly appreciated. I ran this @ a 4.43ghz clock. If I was to run this say, for 12 hours and nothing changed, would that be a good result? What to look for? Any tips appreciated.



Attached Thumbnails
Can you guys help me with using OCCT?-capture.jpg  
My System SpecsSystem Spec
.

25 Nov 2013   #2

Windows 7 Ultimate x64
 
 

Update - I ran It while I was half asleep. About 4 hours, the temps on the north bridge never went above 53, the CPU stayed below 30 and motherboard wasn't even an issue. From what some said, this finds faults with an overclock very fast. It has linpack, gpu 3d, power supply and uses built in HWMonitor to look at temps. At the end of every run you are presented with a bunch of txt files. I don't quite know how to read them yet, and I've ran it quite a few times setting it up, so I am going to have to sort through them to make sense of any of this. But so far my 4.4 24/7 OC is stable. This is a great program I stumbled upon, and I even found A Guy endorsing it a while back Occt 4.3.2
The version has changed since back then though, it is now up to 4.4.0

My System SpecsSystem Spec
Reply

 Can you guys help me with using OCCT?




Thread Tools



Similar help and support threads for2: Can you guys help me with using OCCT?
Thread Forum
OCCT passes, AMD Driver Fails... how? Graphic Cards
Using OCCT to verify if GPU Is bad, not sure about results Graphic Cards
NVIDIA/AMD Video Card - Test with OCCT Tutorials
Occt 4.3.2 Software
OCCT 4.0.0 Beta 7 PC Custom Builds and Overclocking

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:37 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33