Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Having issues with backup system - need help

13 Apr 2014   #11
Dude

Windows 10 Pro X64
 
 

Try this mate

Go to device manager, network adapter, your network card...right click, properties, power management. Check if "allow this device to wake up computer from standby mode" is selected. if so then uncheck it. Then go to your bios and disable wake up on lan , or disable any setting that can bring the computer up from sleep.

I would also consider re-flashing the BIOS.


My System SpecsSystem Spec
.

13 Apr 2014   #12
sygnus21

Windows 10 Pro
 
 

Thanks Dude. Trust me, I've been all over Device Manager. Also, I stated in the update I disconnected the OS drive and the issue was still there. Also, the system is on the wireless network so I intentionally removed the wireless adapter cause I thought it was the problem. Turns out it's not

I've also got both on-board nics disabled in the BIOS.

Thanks
My System SpecsSystem Spec
13 Apr 2014   #13
Dude

Windows 10 Pro X64
 
 

Dang, that is a tough one. I did and edit, have you re flashed the bios
My System SpecsSystem Spec
.


13 Apr 2014   #14
sygnus21

Windows 10 Pro
 
 

Quote   Quote: Originally Posted by Dude View Post
Dang, that is a tough one. I did and edit, have you re flashed the bios
I already have the latest BIOS. As one who is ultra obsessed about updates, this was a given. Anyway there are no more updates for this board as it's an old X58A motherboard. Also I've never had an issue until I moved it to another case so somewhere between the transfer, the board went bad or got damaged. It could have well been a short

At this point all I'm left with is calling Gigabyte's tech support in the morning to see if they can give any suggestions. Otherwise I'm left with finding another X58 motherboard.

Will post updates as they come along.

Appreciate the suggestions.
My System SpecsSystem Spec
14 Apr 2014   #15
madcratebuilder

Win8/8.1,Win7-U64, Vista U64, uncounted Linux distor's
 
 

Have you tried rolling back to a earlier version BIOS flash? Some times the newest BIOS can be problematic.
My System SpecsSystem Spec
14 Apr 2014   #16
sygnus21

Windows 10 Pro
 
 

Though my answer to Dude was I had the latest BIOS (F6), it's one I've had for nearly years now. If it was bad it would have been showed issues.

That said I notice Gigabyte has two beta BIOS's out for this board - both released in 2011 - GIGABYTE - Motherboard - Socket 1366 - GA-X58A-UD5 (rev. 1.0). I may give one of them a try seeing how I've got nothing to loose.

Thanks.
My System SpecsSystem Spec
29 Apr 2014   #17
essenbe
Microsoft MVP

Windows 7 Enterprise X64/Windows 10 X64
 
 

Any good news for us Drew? This may seem rather elementary, but have you checked the C states in BIOS? The C states can cause sleep issues, and have you tried to reset the bios to default values? I saw you mention the Beta Bios, have you tried it? I know a perfectly good bios can become corrupted, so re flashing, even with the same version is worth a chance, especially when considering buying a new board. Just thinking out loud. I hope you can find the solution soon.
My System SpecsSystem Spec
29 Apr 2014   #18
sygnus21

Windows 10 Pro
 
 

No luck.

Beta BIOS didn't work. Messing with various BIOS settings, including PM settings didn't work. At this point I'm pretty much sure it's a board issue, though the only issue is it's refusal to sleep or shutdown without restarting.

At any rate I'm just going to leave it until I either find another board, or just dump it for something newer.

Thanks. Thread marked solved.
My System SpecsSystem Spec
29 Apr 2014   #19
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

While you are waiting sygnus21 I recommend checking again your motherboard stand offs so this won't happen again.
What I thinking is the proper stand offs are there but their might be a extra one that shouldn't be there.
I have also found one time; where a I/O Panel shorted a usb port on a motherboard.
My System SpecsSystem Spec
29 Apr 2014   #20
sygnus21

Windows 10 Pro
 
 

Thanks Jack but in post #10 I stated I completely disassembled the system to check there were no shorts or anything. Thus I've not only check the stand offs, but I actually wound up removing a few that weren't needed (they were extra).

Thanks.
My System SpecsSystem Spec
Reply

 Having issues with backup system - need help




Thread Tools





Similar help and support threads
Thread Forum
My backup hdd shows System should not be, cant do backup
SO i was trying to do a system image backup just a bit ago and it would not let me save it on the D: Backup hdd which is a WD Caviar black 1Tb. So I created a file in the D drive and named it back up and made share as a network folder. Now backup will see it in network option. So I set it and then...
Backup and Restore
Is this a general backup or system IMAGE & BACKUP
Can someone tell by these jpgs if the 6/28/10 "backup" is just a user files backup or a complete System Image Backup with user files backup included which I think is my default b/u setup now ? Thanks....TR
Backup and Restore
system image backup - how does windows pick the drives to backup?
Hi From times to times I load my disk image backup from win7 system and install the new programs/drivers i was using and save a new backup. I usually to do this by backing up my C: drive, but this turn to my surprise, windows for some reason wants to backup C and D, is it possible to pick a...
Backup and Restore
Paragon Backup & Recovery 10 and System Backup 9.5 Free till 7/12
Both 32 Bit and 64 Bit Versions of Backup & Recovery 10 Compact and System Backup 9.5 for free until 7/12. Info: Paragon Backup & Recovery Suite System Backup Downloads:
Backup and Restore
Difference between system image, system rest and backup
Can some one tell me what the differences are between system image, system restore and system backup. Also I made a system image and stored the file on an external drive and can't find the image file. Can someone tell me how I can find the file - did a search and organized the drive by date...
Backup and Restore
Why Backup user and system files fails to create system images to optical disc?
1. Open center 2. Set backup settings and Select a optical disc as the location to save backup 3. An informaion pops up, says "System images cannot be saved on this device" Click for help, and can find "you can't save a system images on a CD or DVD" So, my question is why we can't do it,...
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App