New
#341
Yes good to see you Bilal! It seems you are doing well then.
My new computer has been down for about 10 days waiting for parts and redoing the harness.
I installed two more Phanteks PH-F140XP fans. I found one of my thermometers that I used when I did a lot of auto A/C work. It measures inside and outside temps at the same time so I can compare temps.
Outside case temp is 27.5C
Inside temp 28.1C
Humidety 72%
The added fans made a difference.
6/10 of a degree difference is about as good as it gets.
I also installed two NZXT GRID 10 port fan hubs. It makes it a lot easier when you got 13 fans to wire up.
I installed a StarTech Dual 2.5/3.5 HDD/SSD SATA Trayulell Mobile Rack.
Haven't tried it yet. The first one came broke. The little handle use to open the SSD part was broken. Pickup another intel 120gb SSD. I will tinker with it later.
Note: Temps do get better; 2/10 C difference between inside and out side case temps.
CPU average temps just being online is 33C.
Last edited by Layback Bear; 01 Jul 2014 at 00:38. Reason: Gross error
The inside of your case is lower than the outside?
I'm really curious to see how that swap bay works out. Most bays like that one have issues with the ejection doors and levers breaking. That's why I like my Antec EasySATA; it has fewer parts to break. Sadly, it's not made anymore.
No it's the way my gauge reads.
In means In the room where the gauge is sitting.
Out means using a temp sensor out side of the gauge which is inside my case. I have been watching it for a while and the difference averages about 1 C.
I'm also monitoring the the air coming out of the radiator. For no great reason, just curious.
I just do this to check and see if the changes I have made, helped or hurt the cooling.
Other than air conditioning the room I don't know of any more I can do.
The air coming out of the radiator is 29C.
I'm not worried. I'm just trying to get the best temps I can. This system runs a constant 4.6 over clock with those temps. 4.6 seem to be the sweat spot with low vcore of 1.296v cpuz and 1.30v bios.