Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: CPU Speed, BCLK and Memory Speed: Boot failure.

08 Feb 2015   #21
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Today I have done a complete dismantle and re-seat. I made it sure that there is no loose wires. The case speaker was already connected. But I never got any beep sound. About the standoffs .... the applied PINs are ....
CPU Speed, BCLK and Memory Speed: Boot failure.-2.jpg
One mounting hole of the motherboard does not have a supporting pin, BTW.
CPU Speed, BCLK and Memory Speed: Boot failure.-1.jpg
Now it is running. But I have to wait to decide upto tomorrow, when I will do another cold start. When the machine is already hot, boot ... reboot etc are not a problem.

Steve, I am really thinking that it is the RAM that is the issue, but I am wondering why it is failing when it is cold and why it is working perfectly when it is hot. I wish I could come to know it.
Though I will let memtest86+ run this night.

Thank you Steve and Jack, for your continuous help.




My System SpecsSystem Spec
.
08 Feb 2015   #22
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Arc, I really have never seen this issue. My only thoughts are, if it is the ram, There could be a hairline crack in it, that causes it to fault. When it gets hot, it expands, and basically the crack comes back together and it makes contact and does not fault. But again, I have never seen that in ram. I have seen it in capacitors on Motherboards and PSU's. That could also be on a solder point on the board too. It is usually a crack so small you can barely see it and then usually only when you know where it is. And, that is simply a guess.
My System SpecsSystem Spec
08 Feb 2015   #23
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

If I see the issue to continue tomorrow too, I will start replacing the hardware one by one. RAM will be the first go.
My System SpecsSystem Spec
.

08 Feb 2015   #24
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Did it start today OK?
My System SpecsSystem Spec
08 Feb 2015   #25
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

No, it did not.

Then I dismantled it. Re-seated each and everything. At power on it loaded the optimized BIOS defaults and rebooted to the desktop.
My System SpecsSystem Spec
08 Feb 2015   #26
Monster212

Win-7 H-Prem-x64 Linux-M-Mate-x64
 
 

i am not to smart at checking for issues, but figure throwing my thoughts out there might in turn make ya think of something else.. could it be the power supply, or maybe wires that come with the case??? like the start reset hdd led cords...
My System SpecsSystem Spec
08 Feb 2015   #27
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Arc did you ever build your system on the bench? (out side of the case)
Could you show us a picture of your cpu cooler and ram when installed.
My thoughts are that something might be distorting the motherboard.
My guesses are leaning towards the motherboard. It's made in layers and their are a gazillon solder joints that could be effected by distortion (flexing) or heat expansion and contraction.
My System SpecsSystem Spec
08 Feb 2015   #28
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Monster212, we appreciate your thoughts. I had first thought about the power supply, but all indications are about the ram or Dimm slots. At least that's the way I see it.
My System SpecsSystem Spec
08 Feb 2015   #29
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by essenbe View Post
Monster212, we appreciate your thoughts. I had first thought about the power supply, but all indications are about the ram or Dimm slots. At least that's the way I see it.

I know i am very late to this and didn't bother to start from the start but any chance his ram can be running at two different speeds one rated and one underrated

this does happen when ram goes bad one shows correct speed while one is not so much speecy will be what you need to use though to see individual sticks


Attached Images
CPU Speed, BCLK and Memory Speed: Boot failure.-ram.png CPU Speed, BCLK and Memory Speed: Boot failure.-ram1.png 
My System SpecsSystem Spec
08 Feb 2015   #30
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

I believe it would be helpful if Arc posted a site showing the exact ram being used.

Arc system specs.
Quote:
Memory Corsair 2GB x2 (Single-Channel DDR3 @ 665MHz
My System SpecsSystem Spec
Reply

 CPU Speed, BCLK and Memory Speed: Boot failure.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Download Speed Fine, Upload Speed Non-existent?
All of a sudden while browsing, I get insanely slow loading times, with multiple timeouts. I go on speedtest and this is my speed. I get random latency spikes during video games. I could barely upload the picture of my speedtest results, and I'll be surprised if this thread even makes it. What is ...
Network & Sharing
How do I change CD-ROM speed? (Transfer speed is extremely slow)
Hello guys! So I bought this kick-ass laptop from MSI. It is pretty good. These are the specs (in case they aid in finding a solution to my problem): Name: MSI WorkStation Series GT60 2OKWS-674US OS: Windows 7 Professional 64 bit CPU: 2.7 GHz Intel Core i7-4800MQ
Hardware & Devices
Speed test gives vey good speed but down speed is just 2-3 kb
guys please help me , it happens when ever i want. i speed test from speedtest.net and i get speed 0.89 mbps ( which is good for me) but if i download something , down speed is 2 kb. if i play a video it buffes so slowly that it takes ahour. 1 thing more, this happened few days ago on my...
Network & Sharing
fast download speed but browseing speed slow.
hallo i have a problem last 1 week.my downloas speed well..but browseing speed slow.i playing online games.watch movie. its soo low its too pain full.i cant under stand why?..i am from srilanka.internet line ADSL.. prolink router..512KB/s line..plz help me.
Network & Sharing
Computer Bottleneck- HDD - SSD. giving data speed to proccessing speed
Through the windows experience im at 7.8's / 7.4's... with my hdd at 5.9. looking at getting a ssd to level everything up.... but what i dont know is... how does the read/write speeds translate into processing. what read speed is equal to the rest of my rig? I just dont know how it translates...
Hardware & Devices
Download speed is limited, but upload speed is fine
Hi everyone, At first I noticed a slow down with my ISP (Verizon FIOS) from 15mb/s to 6-7mb/s, but the upload speed is unaffected. So, I called my ISP they told me could be an issue with the Windows that I am using. Then I called MS regarding the network issue,...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App