Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New replacement computer fan reads 0rpm

05 Apr 2016   #41
realflow100

Windows 7 Ultimate x64
 
 

Nevermind I restarted and disabling smart fan in bios did do that (forgot to save changes last time). but i was still able to change it with speedfan back from on/off to software controlled... Instantly going back down to whatever was originally set in my fan control settings.. but still slow to adjust to any further manual fan speed changes........ Takes over a second to even hear an audible change in fan speed before it slowly changes to whatever i set it to..


like say its manually set to 100%.. running at 100% RPM.. with automatic fan control disabled and software control used..

Then I change it to software controlled.. I see it instantly lower down to 45% in the main speedfan window.. but the fan responds much later.. and takes over a second to audibly change speed...


My System SpecsSystem Spec
.
05 Apr 2016   #42
rvcjew

7 Pro x64, 10 Pro x64
 
 

So you changing this area of speedfan to manual or software controlled?


Attached Images
New replacement computer fan reads 0rpm-fans.png 
My System SpecsSystem Spec
05 Apr 2016   #43
realflow100

Windows 7 Ultimate x64
 
 

Yes. PWM2 is set to software controlled and works to control the CPU fan speed (same as manual. but different name than in your screenshot)
My PWM1 doesnt do anything.. Listed at 0RPM in speedfan as well.. Changing its speed or mode doesn't seem to affect anything in the computer.. (Maybe its the PSU fan but isn't adjustable via motherboard circuitry?)

What should the PWMOUT clock be? it lists between 0.75M and 48M but doesn't seem to affect anything at max or minimum. I changed it by accident and dont remember what the default should be. so i set it at medium setting of 6M
My System SpecsSystem Spec
.

05 Apr 2016   #44
rvcjew

7 Pro x64, 10 Pro x64
 
 

I don't have a pwmout on mine in that menu could you take a pic of it?
My System SpecsSystem Spec
06 Apr 2016   #45
realflow100

Windows 7 Ultimate x64
 
 

Here's a screenshot... Don't know what this does but I dont think it'd be good to mess with it too much.... might be important.

Fan speed only changes instantly/hyperfast if I change between manual fan mode and on/off or from between smart and on/off...... but not when its on manual and i change the fan speed on the main speedfan window manually. or with any of speedfans automatic settings based on temperature.....


Attached Images
New replacement computer fan reads 0rpm-sdgdsgdsg.png 
My System SpecsSystem Spec
06 Apr 2016   #46
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

I don't believe 39c is all that bad bud
Is it stable ?
I have a quad core sitting at 37c ambient other core readings are 35/ 39/ 39c
CPU in bios usually say 26c
I use this to easily see the temperatures
Download Real Temp 3.70 | techPowerUp
My System SpecsSystem Spec
06 Apr 2016   #47
realflow100

Windows 7 Ultimate x64
 
 

I use realtemp as well... Same temps listed as in speedfan... The last two cores > are at 33-42*C (idle and max load GPU and CPU)

Almost no temperature increase when max CPU and GPU load... just a few degrees.. Fan set to smart-guardian and its still staying about the same... no fan noise either.. very quiet.

The CPU is locked at its turbo state with idle frequencies disabled. so constant 2.42Ghz and much more stable computer performance than with idle states enabled too.. no more random framerate drops in minecraft.

Idle is around 32-39*C and max load after 30 minutes GPU and CPU 100% load is about 42-45*C
My System SpecsSystem Spec
06 Apr 2016   #48
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Still not bad for a stock cpu cooler
Anything better would need a better cooler.
My System SpecsSystem Spec
06 Apr 2016   #49
realflow100

Windows 7 Ultimate x64
 
 

How would i get a better heatsink for this?
My System SpecsSystem Spec
06 Apr 2016   #50
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

My System SpecsSystem Spec
Reply

 New replacement computer fan reads 0rpm




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
My computer reads missing operating system
My computer reads missing operating system... I tried repairing with operating system disc, but I'm stuck ! Help
General Discussion
Elune replacement explorerframe.dll crashes my computer
Hello! I am attempting to install the Elune theme from dA (Browsing deviantART). I installed UxStyle and copied the theme files into the C:\Windows\Resources\Themes folder. The new theme shows up under the Personalize window, but when I click it it looks like a weird mix of XP and Windows...
Themes and Styles
Computer Reads Civilization Instruction Manual, Actually Learns
Read more at: Maximum PC | Computer Reads Civilization Instruction Manual, Actually Learns
Chillout Room
BD Drive reads BD,DVD but not CD??
G'Day All, I have just compteted building a new system and have discovered my BD drive (Samsung SH-B083L 8x BD-ROM) reads Blu-Ray disks fine and DVD's fine but will not recognize CD's. Wondering if anyone has any suggestions that I might try?? I have read through the forums and this...
Hardware & Devices
Computer Replacement, help me choose.
Hi guys, I got my computer from PC World last year and it stopped working the other day so I took it back to them and they offered me a replacement. I'm not really a hardware person but if you guys could help me decide if the following PC is going to be good/better than my old one. My faulty...
General Discussion
CD/DVD reads only some disks...
So i have 7 Ultimate, just built a new comp to go along with it. Now it doesnt read the motherboard an video card disks that which is not a big deal really, then i put in a video game disk (CoD4), and it read it fine...then when i took it out and later put it back in it didnt read it. I then tried...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App