Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: CPU Temperature Overheat

30 Mar 2016   #11
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Thanks okay I get it now
Have you reinstalled the old cpu cooler yet ?
And which one was the old ?


My System SpecsSystem Spec
.
30 Mar 2016   #12
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Now the CPU is sitting squarely on the heatsink?? just make sure it is and is not caught on anything that stops it fitting flush down.

Now I personally like to use Arctic Silver products to a) clean and prepare both surfaces (this makes them exquisitely clean) then b) apply the thermal compound thinly and evenly over each surface using the index (or whatever) finger in a vinyl glove then c) place a rice grain sized spot of thermal in the centre of the CPU.
Spreading the thermal first makes absolutely sure that every part of each surface is covered but it only has to be very thin the spot of thermal will "bleed" out towards the edges after a few minutes running.
This Arctic Silver Incorporated - ArctiClean then this Arctic Silver Incorporated - Arctic Silver 5

Otherwise lie the others I would be suspecting something in the BIOS - just as a by the by how old is the CPU?? it looks to be new but just curious.
My System SpecsSystem Spec
30 Mar 2016   #13
IoNGeNeRaL

Windows 10 Pro x64 (UPGRADED - 10/20/2016)
 
 

It is seated fine. I'm unable to move the pump block. The CPU is about 4-5 years old now and still works fine. Like I said, it's just saying its overheating when in reality it's not.
My System SpecsSystem Spec
.

30 Mar 2016   #14
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

Quote   Quote: Originally Posted by IoNGeNeRaL View Post
In the BIOS it shows CPU Vcore at 1.5v for some odd reason. It only started doing this when I removed the BIOS jumper plug from the 2 pins it's on.

It just seems like the BIOS settings and CPU vcore voltage is messed up as it should never be at 1.5v on AUTO.
Are you sure you put the jumper back on the correct pins ?
Can you manually set the CPU vcore voltage to what it should be ?
My System SpecsSystem Spec
30 Mar 2016   #15
IoNGeNeRaL

Windows 10 Pro x64 (UPGRADED - 10/20/2016)
 
 

The jumper is on the right pins. (The first 2 pins, not the 2nd and 3rd.)

I tried to manually but I wasn't sure what the vcore voltage should be. I know the CPU Voltage should be 1.34v. I'm very uncomfortable with keeping the system on with it beeping away at me telling me it's overheating. Like I said, if it truly was at 127C it would shut down instantly as it used to upon hitting 90C.
My System SpecsSystem Spec
30 Mar 2016   #16
DavidE

Multi-Boot W7_Pro_x64 W8.1_Pro_x64 W10_Pro_x64
 
 

Did you place the jumper on the 2nd and 3rd pins for a few seconds after you accidentally removed it ?
That's part of the bios reset process (for me).
I also press the power button a few times with AC power disconnected to drain any residual power.
Then place it back on the first 2 pins.
Remove the AC power cable before doing this.

If AUTO still keeps the voltage at 1.5, I would try manually setting the voltage to 1.34.
My System SpecsSystem Spec
30 Mar 2016   #17
IoNGeNeRaL

Windows 10 Pro x64 (UPGRADED - 10/20/2016)
 
 

I just don't feel comfortable keeping my system on whilst it thinks it's overheating. It takes a couple of minutes to find all of the appropriate values (voltages) and in that time it could actually damage the CPU, y'know? I'm just being careful as this system is the first gaming system I've ever built (for myself). I cherish it very much.
My System SpecsSystem Spec
30 Mar 2016   #18
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Quote:
it's just saying its overheating when in reality it's not.
Well that smacks of a malfunction of either the thermal sensors within the device or receptors on the board.

Another thought is have you checked outthe PSU see my ditty on checking the rails it could be out of whack though if it were out of whack that much it should shut down.
Using HW Info
PART A:
You can test the volts on the PSU with HW Info HWiNFO, HWiNFO32/64 - Download < download the right bit version and close the right hand window select Sensors and scroll down to the power section where you will see what the volts are doing see my pic. In my pic the section (Nuvoton) with VBATT is a dead give away you are in the section for the rail voltages. There are other section titles and one that pops up often is ITE
Now the voltage on the different rails have to be within 5% =+/- of what is required or the machine will not work properly if at all.
Limits +/-
12v = 11.4 – 12.6v
5v = 4.74 – 5.25v
3.3v = 3.135 – 3.465v
The Power good signal voltage at pin 8 on the 24 pin plug (grey cable) should be the same as the 5v rail reading/s
See this for the rail voltage info
Power Supply 101: A Reference Of Specifications - Power Supplies (Section 2.)
The original right hand window shows the machine running and is handy for that but for looking at the components in some detail close it and use the main left hand side panel
FOR OTHER COMPONENTS
PART B:
Open each small square with + in it on the section the components are in and then click on the individual component/s (it will highlight in blue) - in the right hand side will appear all sorts of details including brands speeds and other essential info that particular device. See pic for example.


Attached Thumbnails
CPU Temperature Overheat-hw-info-desktop-psu.png  
My System SpecsSystem Spec
30 Mar 2016   #19
IoNGeNeRaL

Windows 10 Pro x64 (UPGRADED - 10/20/2016)
 
 

I cannot boot into Windows because of the "overheat". I simply cannot boot into Windows. I've had a new cooler (Corsair H90) purchased and will try that as I've read countless issues with this cooler from people. If it continues after installing this new Corsair cooler then I may have to RMA my motherboard. I may have "scratched" something on the back of the board when I was trying to remove the sticky adhesive/sticky tabs from the old back socket bracket. I'm not sure if that may be the problem.
My System SpecsSystem Spec
30 Mar 2016   #20
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Depending on what you used to get the original back plate off with could very well of damaged the mobo
Plastic and alcohol is what I used with an Acer back place that I swear was super glued on
My System SpecsSystem Spec
Reply

 CPU Temperature Overheat




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
GTX 970 overheat
My Zotac GTX 970 AMP Extreme Edition is overheating going over 60C in the main menu of the game. I determined its temp by Zotac Firestorm. The game that I run is Dying Light, I have 2 fans one at the back and one at the bottom. If I ignore the temp my case would get hot I have examined the video...
Graphic Cards
OVERHEAT
What was the really needed time for computers to rest? If you use it for 16hours..playing will it shorten your Hard drive life?and can it actually overheat your system if you wont let your PC rest for a while?? Just asking..well my fan was burned.but i dont actually play 16 hours..it was just 2...
Performance & Maintenance
CPU overheat
Hi. I bhought a new graphic card ATI Radeon HD 5750 about week ago and now I suspect that it make my CPU AMD Phenom II x2 550 overheat as there was no temperature problem with old card. When I am not running program or game which use a high graphic resources- cpu allright. As soon as I start...
Hardware & Devices
touchpad overheat?
hi, i have a dell inspiron 1525, dual core, 1gb ram, 160gb hdd. a few weeks ago i did a clean install of windows seven x86 (before, it was vista). a couple of days now i notice that the touchpad is getting uncomfortably hot. the rest of the laptop is normal temperature. buttons aren't so bad, it's...
Hardware & Devices
GPU mad overheat
I recently got a new computer and finally got around to downloading SpeedFan. What I saw made me cringe and stutter. My GPU was running at an impressive !150! Celsius. I stopped my computer and cleaned the fan. I got it down to 112 right now, running it on open case (mind you that I monitored it at...
Graphic Cards
Core temperature or CPU temperature?
Hi, I have an AMD 955 CPU and ROG Crosshair III formula motherboard When testing, I use both HWM Pro, AMD Overdrive and LCD Poster to watch out for the temps. In both HWM Pro and LCD poster there is the CPU temperature showing. I use AMD overdrive to look for Core temps...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App