Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Case Rollers

01 Dec 2009   #1
seekermeister

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 
Case Rollers

Somewhere I saw some rollers designed specifically for attaching to the bottom of the case, instead of using a rolling stand or table, but I have scoured the link history in my browser and can't find the location again. If I must, I shall go to Harbor Freight and buy some small casters, but I would prefer something more tasteful. Googling takes me mostly to some kind of laptop rolling bags or something else off the wall. Can anyone point me to the right location?


My System SpecsSystem Spec
.

02 Dec 2009   #2
Orpheous

XP Pro/Vista Ultimate (64)/Windows 7 Ultimate Signature Edition(64)
 
 

How about these:
Lian Li Industrial Co., Ltd.
a little expensive, but geez they look awesome!
My System SpecsSystem Spec
02 Dec 2009   #3
seekermeister

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 

Thanks, those are exactly what I had seen before and were looking for. They do look good, but that isn't the reason that I want them. They will go on my secondary rig, which will go under my L shaped desk, in the corner, which means that it will have to roll over the hump of the leg bases. I had a plastic rolling stand, but that only lasted until I tried to roll it out. Apparently, a roller got crosswise and broke off. This looks far more durable.

Where ever I saw them before, they also had them in black, but this puts me on the right track.
My System SpecsSystem Spec
.


02 Dec 2009   #4
Orpheous

XP Pro/Vista Ultimate (64)/Windows 7 Ultimate Signature Edition(64)
 
 

you're welcome
you may need to drill some extra holes in the baso of your case to fit it as there are 4 screws for each bracket - 8 in total. Make sure you don't get metal swarthe inside your case for it to get into your circuitry and short something out... If you're very careful, turn the case upside down, mark out the holes and sticky tape aerosol lids on the inside of the base where you're going to drill, make sure they're stuck on well and don't drill in too far
My System SpecsSystem Spec
02 Dec 2009   #5
seekermeister

W7x64 Pro, SuSe 12.1/** W7 x64 Pro, XP MCE
 
 

Good advise. I sent an email to the website where I thought that I saw these in black, so I'm going to await their response before jumping off.
My System SpecsSystem Spec
Reply

 Case Rollers




Thread Tools





Similar help and support threads
Thread Forum
The Case of the Missing Pillow Case
Please press play to set the right mood as you read. ;) NzlG28B-R8Y The Case of the Missing Pillow Case Today appeared to be a normal day just like any other. I had decided that I should strip the beds and wash the sheets from them since it had been a while and they were starting to...
Chillout Room
Got my new case :)
I just got my new 600T White case in today, as well as my Seasonic PSU & RAM :) It was killing me to see what it looked like powered up, and still another week before I can order the rest of my new build. So, I moved the main guts of the old system into the new case w/the PSU. Yea,...
PC Custom Builds and Overclocking
Going Case Less
Anyone have their mother board and all else out of the case? Ie mouned to a table or on a wall?
Chillout Room
new case
I too, am looking for a new case to upgrade. My old one is a Ultra E-Torque mid tower ATX case. Nice and roomy but lacks ports in case for wire management. I have some specific options I'm looking for. They are as follows: mid/full tower, clear sided, 1 or 2 bays for 3.5" that are at the middle or...
PC Custom Builds and Overclocking
New case?
not sure if you can help me but i have a Fujitsu Esprimo E5905 Desktop with a Fujitsu D2164 and the original case can only hold 1 hdd and 1 dvd drive i want at least 2 preferably 3 hdd's and 2 dvd drives can any one help me with what case i can get? :D:devil:
PC Custom Builds and Overclocking

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App