i7 920 Voltage Question.


  1. SevenNerd
    Posts : 159
    Windows 7 Ultimate 64bit
       New #1

    i7 920 Voltage Question.


    I'm trying to obtain a stable 3.8Ghz OC. My temperatures are fine, and my memory frequencies are set accordingly. I'm just afriad to go past 1.35v on the vcore and qpi?

    Can you go higher?
      My Computer
    Quote Quote

  3. carwiz
    Posts : 4,161
    Windows 7 Pro-x64
       New #2

    This has a pretty good run-down on the voltages.

    Intel Core i7-920 Overclocking Guide. Page 3 - X-bit labs
      My Computer
    Quote Quote

  4. SevenNerd
    Posts : 159
    Windows 7 Ultimate 64bit
    Thread Starter
       New #3

    Perfect! Thank you.
      My Computer
    Quote Quote

  6. SevenNerd
    Posts : 159
    Windows 7 Ultimate 64bit
    Thread Starter
       New #4

    Success! Bumped all the voltages up to the maximum that intel supports and presto.!

    A stable Overclock!
    Attached Thumbnails Attached Thumbnails i7 920 Voltage Question.-overclock.png  
      My Computer
    Quote Quote

  7. carwiz
    Posts : 4,161
    Windows 7 Pro-x64
       New #5

    Almost 42%! Looks good but keep a close eye on temperatures.
      My Computer
    Quote Quote

 

  Related Discussions
Question about NB and Bus auto vs manual and voltage
in PC Custom Builds and Overclocking

I have a fx-6100 and in my bios the Ht frequency is on AUTO 2400mhz, while the NB frequency is @ 2000MHZ. I have my chip OCed via cpu multiplier to 22x and raised voltage to . NB voltage is on auto as, its its multiplier. My bus is on auto ( 201.3) as well. I have been told that the bulldozers like...
Memory voltage question.
in Hardware & Devices

Hey guys/gals Quick question for you.. I was going to buy some extra ram for my father in law, but then I thought perhaps I could upgrade mine and give him my G.Skill Ripjaws. The question is regarding voltage.
imc voltage help please
in PC Custom Builds and Overclocking

hello i'm realy lost on this can anyone please gave me some help with the (imc voltage)? i checked some other sites but each site gaves me a different answer. one site says don't go over 1.22 another says you can go to 1.40 and another says it's like the north bridge on the socket 775...
CPU Voltage & CPU VDDA Voltage
in PC Custom Builds and Overclocking

Hey guys. I am sort of confused as to why my BIOS has "CPU VDDA Voltage" and not "CPU Voltage". My BIOS version is 1102 (latest). Any help?
RAM Voltage
in Hardware & Devices

Hey peeps, Just building my new system and was reading in the manual for the board that Intel says not use RAM over 1.65v. Problem is my RAM is rated to run at 1.85v. I checked in the BIOS and it looks like the system is undervolting but obviously when i start gaming that will volt-up. ...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 00:27.
Find Us