Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC error: bootres.dll - dual boot issue?


20 Feb 2011   #1
lister

Windows 7 Panasonic CF F9 (used to have CF F8)
 
 
SFC error: bootres.dll - dual boot issue?

Hi my machine suddenly went into a black screen and made a sort of high pitched noise, which sounded like a a video had been stuck playing. This happened when I tried to play an embedded video.

Anyways I immediately sort of panicked and thought it might be the hard drive. I tried to set up a check disk on re-boot but on reboot it says "check disk cancelled" despite me clearly setting it up correctly to scan disks.

So I did the SFC scan and it threw this error about 40 times:

"2011-02-21 10:14:24, Info CSI 00000046 [SR] Cannot repair member file [l:22{11}]"bootres.dll" of Microsoft-Windows-BootRes, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch"

The red font changed for each "bootres.dll" error.

Now, my question is - is this serious? My machine seems to work just fine and it might have just been a corrupt video, (which was hosted on bbc however.....) or, is the fact that I have a dual boot making this dll not work?

Is this preventing me from scanning my disk?

(My disk is SSD)

THANKS V MUCH


My System SpecsSystem Spec
.

20 Feb 2011   #2
gregrocker
Microsoft MVP

 

Is the boot animation running correctly? Have you made any changes or modifcations recently?

Please post back a screenshot of your maximized full Disk Mgmt drive map and listings, using Snipping Tool in Start Menu so we can check the configuration of your Dual Boot.

Install, update and run a full scan with http://www.malwarebytes.org/

Run SFC several times from Command Line on DVD/Repair CD Command Line: System Recovery Options
SFC /SCANNOW : Run in Command Prompt at Boot

If this fails to repair file, run System Restore from DVD/Repair CD Command Line: System Restore

Now try running Disk Check from DVD/CD Command Line.

If this fails run a Repair Install

Check the logs and run through rest of Win7 troubleshooting fundamentals
My System SpecsSystem Spec
23 Feb 2011   #3
lister

Windows 7 Panasonic CF F9 (used to have CF F8)
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Is the boot animation running correctly? Have you made any changes or modifcations recently?
No but I did install a "Grub2 customiser" and remove old kernels from the linux partition which might have caused this problem.

Quote   Quote: Originally Posted by gregrocker View Post
Please post back a screenshot of your maximized full Disk Mgmt drive map and listings, using Snipping Tool in Start Menu so we can check the configuration of your Dual Boot.
Enclosed as attachment

Quote   Quote: Originally Posted by gregrocker View Post
Install, update and run a full scan with http://www.malwarebytes.org/
Checked and no viruses etc
Quote   Quote: Originally Posted by gregrocker View Post
Run SFC several times from Command Line on DVD/Repair CD Command Line: System Recovery Options
SFC /SCANNOW : Run in Command Prompt at Boot
Both of these threw this error: Windows Resource Protection could not start the repair service.

And then when I tried sfc /scannow this error came: There is a system repair pending which requires reboot to complete. (I rebooted but nothing happened)

Quote   Quote: Originally Posted by gregrocker View Post
If this fails to repair file, run System Restore from DVD/Repair CD Command Line: System Restore
System restore was removed to spare space but I do have a full system image from a previous good time

Regarding the below - I still have to do these but judging from what you see so far do you think it might be best for me to wipe everything and re-install?

Quote   Quote: Originally Posted by gregrocker View Post
Now try running Disk Check from DVD/CD Command Line.

If this fails run a Repair Install

Check the logs and run through rest of Win7 troubleshooting fundamentals
****** PS THanks for your time


Attached Thumbnails
-setup.png  
My System SpecsSystem Spec
.


23 Feb 2011   #4
gregrocker
Microsoft MVP

 

We see chronic problems with GRUB corrupting Win7 beyond repair when it is on the same HD. Best if you can to boot them on separate HD's via BIOS and not use GRUB at all.

The error appear to be boot sector corruption which is exactly what GRUB does to Win7, however it doesn't seem bad enough to affect performance further yet. I'd work on getting separate HD's before going as far as to reinstall.

If SFC won't run from elevated WIn7 Command Line, or from Recovery options Command Line via F8, DVD or Repair CD (making sure to use the WIn7 drive letter which WinRE presents which might be different), due to a pending repair, then try running Startup Repair from DVD/Repair CD first.

If you clean reinstall be sure to wipe the HD of all GRUB corruption using tutorial in my link below.

Tips for getting a purrfect Win7 clean reinstall - use the ones which apply: http://www.sevenforums.com/installat...ml#post1086729
My System SpecsSystem Spec
Reply

 SFC error: bootres.dll - dual boot issue?




Thread Tools



Similar help and support threads for2: SFC error: bootres.dll - dual boot issue?
Thread Forum
I renamed winload.exe and bootres.dll! PC won't boot! Performance & Maintenance
Boot issue after removing original OS in dual boot Installation & Setup
Dual Boot Issue (Lost my Dual Boot Menu) Installation & Setup
XP x86 and 7 x64 dual boot issue Installation & Setup
dual boot issue Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:48 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App