Monitor ICC Profile (color management)

Hi all :)

I have a problem with color management :

I'm an amateur photographer, I have made an ICC color profile for my screen under windows xp (using a friend's probe and software) the profile works perfectly under xp

I have loaded it under seven following all the steps found here

Color management settings: frequently asked questions - Windows Vista Help

at the "How do I change the default color settings for a specific device for all users on the computer?" section

The monitor is properly installed, the profile is set as default for my monitor, but I can see no change in color rendering... as if the icc profile is not active

Any pointers ?

Thanks

Thank you Brink

I'll try that if I don't find a way to use my icc profile

The icc profile was made using an eye one display 2 probe and it's supposed to be way more precise than a manual calibration, colors are really accurate on my win Xp boot using this profile

I have to say that on my xp boot there is a little software that reminds windows to use the profile every boot, but as I don't have the probe anymore I can't reinstall it, theoretically the profile file is sufficient to make the monitor works correctly, as long as windows accepts to use it...

Thank you anyway :)

I don't believe profiles and their degree of complexity are entirely standardized, and you may well have a profile that requires loading from the software rather than the system.

I'd see if you can find the loading software you were using before. You should be able to install it and associate the profile without the hardware.

Given the way monitors can drift over time, you might also want to look into getting your own device like the Spyder2Express by ColorVision which remains fairly affordable, especially if you do photography stuff on a semi-regular basis. It might not quite be up to the same caliber as the super-duper pro models, but it works perfectly fine under most scenarios, and is certainly better than forcing an outdated profile, too.

Ive got my display calibrated with a Spyder2 and while it works fine i find that i still have to use the spyder software to load it on start up because the W7 CM applet doesn't always load it.
It works fine with W7 but for some reason windows doesn't always load it.

PITA.

I realize that this thread is very old, but I thought maybe I'd try it anyway, as I am lost (again):

I am having the same problem as Aturion. I am also an amateur photographer and use the iOne Display 2 to calibrate my monitor. I have used it with XP for many years, with excellent results. Whenever I start up with XP, I can see the exact moment in time when the .icc profile is loaded and applied.

After conducting the calibration within windows 7, the .icc is applied. There is even a setting in the calibration software that allows me to turn the .icc profile on and off, so that I can visualize the difference. But when I start-up Windows 7, the .icc is not applied.

I have gone into the advanced settings and designated the .icc file as the default, but it seems as if it is never applied. And yes, I do have the 'use my settings for this device' box checked.

I also do not have the Adobe gamma correction program in my startup, so this cannot be the issue.

If anyone has any suggestions, please let me know!

I have a slightly different question:
Does anyone know if I can rename the icc profiles under win7?
I didn't find out how so far...

thx

This is waay old, but since there was never an answer here it is:

You follow the directions for "How do I add a color profile..." here:
Color management settings: frequently asked questions
Then you back to the Devices tab, click Add..., find and add the profile you just added on the other tab.
Now that profile should show under ICC Profiles. Select it and click Set as Default Profile.

There you go. Simple really but odd...

I lost my hard drive and had to scramble to get my monitor calibrated. Found the resolution on the colorvision site:

Spyder2 2.3.5 - Win - Powered by Kayako fusion Help Desk Software

Hope this link works for you. Worked on 2/25/2016