Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Startup delay with blank screen...

16 Jan 2014   #41


See if this helps: Power Supply Calculator

You can also ask other owners of the card in their forums if they have one, or ask their Support.

Someone in our Graphics section here might also be able to help you. I'd also ask Google to see if it's a known issue.

My System SpecsSystem Spec
17 Jan 2014   #42

Windows 7 x64

Thanks, the site says I need a PSU rated for 683w. I'll ask other users as you suggest.
My System SpecsSystem Spec
17 Jan 2014   #43

Windows 7 x64

Mixed responses so far. I've had people definitely say it's the PSU and i've had people definitely say it isn't the PSU. The place I bought the card from seems to think that my PSU should be sufficient so they've agreed to get it couriered back and tested.

If it proves not to be faulty once they test it then I will get another PSU, although my budget for the month has now been firmly eaten away by the purchase of this graphics cards.
My System SpecsSystem Spec

22 Jan 2014   #44

windows 7
can't boot after load failure Did not load driver \SystemRoot\System32

Interesting thread that I hoped might solve my issue:

I get
Did not load driver \SystemRoot\System32\DRIVERS\srv.sys

and can not boot except in safemode as the system hangs after entering password.

Prior -
Lenovo y550p i7 laptop, Windows 7 Home premium 64 bit
All works fine on the 500G drive that came with the machine. The problem started after moving to a Seagate SSHD 1TB drive. The clone process left an unallocated partition of 500G. After re-partitioning to claim the 500G I get this problem booting.

I tried Acronis 2010, 2012, 2014, Image Drive, Clonezilla, EaseUS...

I tried both a straight clone leaving the extra 500G to reclaim later, and a 1 step that re-sized the partitions during the clone process. All end up with the same result.

as a test, I tried cloning the original 500g drive to another 750G drive, using both options of partitioning during and after the clone - boots up no problems.

I tried the Seagate SSHD on another computer - same cloning options - works fine!

So, the problem is limited to my target machine in combination with this hard drive...

I tried disabling the video drivers as previously noted in this thread.

been working on this around the clock for 8 days now - Any tips appreciate!


ps: should this be a new post/thread?
My System SpecsSystem Spec
22 Jan 2014   #45


Did you resize using Easeus in order to gather space from the partition's left, since Disk Mgmt can't do that with its safer Extend feature?

The only totally safe methods to do this are Disk Mgmt and free Partition Wizard boot disk to extend partition easily with Partition Wizard - video help. All others can fail with data loss.

In addition any time you resize on the boot sector at the front of the HD, it risks requiring Startup Repair
to repair the boot. So confirm the Win7 or it's 100mb System Reserved partition (preferred if you have it) iis Partition Marked Active then run Startup Repair - Run up to 3 Separate Times

If these fail then post back a camera snap of Partition Wizard drive map showing all listings clearly.

If you want to reimage then wiping the SSD/HD first with Diskpart Clean Command may help to clear old boot code which may interfere.
My System SpecsSystem Spec
22 Jan 2016   #46

Windows 7 Ultimate x64

I know this is a REALLY old topic but I had the same problem in the last week and here's how I solved it. If you have something similar to my configuration, it might help you.

The problem was that after the Welcome screen I had a delay of about 1 minute (or more), which is not normal, because I'm using a SSD. In the end, I checked what I have installed recently. It turned out to be a program for my sound card - Creative ALchemy. If you've installed drivers for your Creative sound card, you might have installed ALchemy as well. I did by mistake and uninstalled it, because I don't need it (no one does, ever). But the uninstall doesn't clear it all. Services remain - and removing them from the msconfig -> services fixed the black screen problem.

TL;DR - go to msconfig, click Services, check the "Hide Microsoft Services", and uncheck everything else, then restart your PC. If that fixes your problem - check what was the cause for it and bring back services one by one or five by five, your choice.

For me, it was the Creative ALchemy stuff, and I registered here just to tell you how I fixed it. Of course, clean your startup items as well. I guess you've already done that, though :-)

Hope it helps.
My System SpecsSystem Spec

 Startup delay with blank screen...

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Windows 7 splash screen delay at startup
Hi guys, new to the forum but wondered if anyone around here could help me with a little problem I am having. I have recently (last Thursday morning) reinstalled Windows 7 Home Premium on my Dell XPS 16 and I have noticed since doing this it will lag at the splash screen on startup for 30-40...
General Discussion
64-bit - Blank screen on boot up, before login screen; slow startup
Bonjour mes amis. I recently have started getting the infamous black screen of death at my computer's startup, very similar to this fellow user's problem. Basically, Blank screen on boot up, before login screen; slow startup. The black screen lasts at least two minutes on average, before the...
Performance & Maintenance
Blank screen on boot up, before login screen; slow startup
Hey, first time posting here, so sorry if this is the wrong section or anything. Lately my laptop has been experiencing a problem when I boot it up. After the Starting Windows screen with the glowing Windows logo, a blank black screen pops up that lasts for ages (I'd say at least 5 minutes)....
General Discussion
Blank Screen at Startup
hey, I have a HP Pavilion Elite, OP windows seven. The problem i have is when i turn the computer on, it goes through the RAID boot up and the Ethernet Boot up. But after that, all I receive on my monitor is a blank black screen. if anyone knows how to fix this, that would help a lot. Thnx.
Installation & Setup
Startup Delay after Welcome Screen
Hello, Windows 7 is booting normally and after I type my password in the login window the text 'welcome' shows up for 8 seconds or so. Then the screen fades to black. At this point, the only thing I see is the mouse pointer (which I can move). Pressing Ctrl-Alt-Del doesn't work (does not...
General Discussion
Blank screen after startup
I have a problem that seems to be common and I still haven't found the solution after 2 days of searching the web. I've installed Windows 7 and it works fine only in Safe Mode or if I disable 9800 GT else I get blank screen after startup. Solutions I've found searching the web: 1. Change graphic...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:42.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App