Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Cleaning CPU's thermal paste.

05 Feb 2011   #1
SlackerITGuy

Windows 8.1 Pro
 
 
Cleaning CPU's thermal paste.

Do you guys leave the CPU in the socket? or actually remove the CPU completely?

Thanks!


My System SpecsSystem Spec
.
05 Feb 2011   #2
cloud8521

 

i keep it in the socket. i feel i may bend the pins if i take it out.
My System SpecsSystem Spec
05 Feb 2011   #3
society misfit

Windows 7 Professional
 
 

I leave it in the socket to get the majority of it off. Little detail cleaning once removed.
My System SpecsSystem Spec
.

Reply

 Cleaning CPU's thermal paste.




Thread Tools




Similar help and support threads
Thread Forum
Help cleaning thermal paste out of CPU socket
So a few days ago I was putting my CPU into my new motherboard. I accidentally applied to much silver thermal compound(conductive) and I ended up having it dribble down the sides. I decided it would be easier to clean my CPU if I took it out. When I pulled my CPU out of it's socket some of the...
Hardware & Devices
Help cleaning thermal paste off motherboard
I got my new Asrock 990fx extreme3 motherboard today. As I was applying thermal paste to my CPU I accidentally got some on my motherboard. I cleaned it well with a fine paint brush and 91% isopropyl alcohol. As I was getting ready to apply a new layer of thermal paste and attach my CPU cooler I...
Hardware & Devices
cleaning a laptop thermal pad?
I accidentally got some dust on one of my thermal pads. :confused: I probably could get a replacement, but I do not know were to order one or what specs to look at. Preferably I'd keep this one, but clean the now somewhat dusty surface. How should I do this, because I suspect cleaning it with...
Hardware & Devices
Desktop still having problems after cleaning interior after thermal ev
My computer used to shut down and a message used to be displayed that there was a thermal event. I opened the computer, remove the screws of the fan and cleaned the thing underneath it of dust which it had a lot( and of course other parts too). after that I put the fan back but I am not sure...
General Discussion
Thermal Paste
After reading some good reports on Shin Etsu thermal paste, I bought some, but am having a lot of problems with getting it to spread properly. It tends to clump together, and when forcing it out, it leaves such a thin covering that the lettering on the CPU is still plainly visible. I'm about to...
Hardware & Devices
Used way too much thermal paste
This isn't that important, all it is is that I'm worried. It was my first time round putting thermal paste onto a cpu, and i sort of used an entire 3.5g syringe of arctic silver 5 underneath a zalman9700. Yes some did come over the sides, wiped it off, I'm guessing there is a layer inbetween...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App