Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Failed SFC repair help

09 May 2011   #1
Mykill100

windows 7
 
 
Failed SFC repair help

When I run a SFC scan its only getting to 96% and then reports that it couldnt repair some of the files. Can anyone please help in with the repair of the system as a complete reinstall will mean losing so much. Here is the CBS log


My System SpecsSystem Spec
.
09 May 2011   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by Mykill100 View Post
When I run a SFC scan its only getting to 96% and then reports that it couldnt repair some of the files. Can anyone please help in with the repair of the system as a complete reinstall will mean losing so much. Here is the CBS log
Did you have a problem that made you run SFC?

If sfc fails you can run a repair install without losing it all.
My System SpecsSystem Spec
09 May 2011   #3
Airbot

Windows 7 Ultimate x64 SP1
 
 

Just run a repair install.

Repair Install
My System SpecsSystem Spec
.

09 May 2011   #4
Mykill100

windows 7
 
 
Run a repair install

I would have done this but the system is OEM, MESH say the disk that comes with the system is just the same as a shop bought version but I highly doubt it. I'd manually restore the files if I could find out which files were corrupt. The system is quite stable but for browser problems. Flash wont completely uninstall so there's problems there. IE regulary stops responding.
My System SpecsSystem Spec
09 May 2011   #5
marsmimar

Microsoft Community Contributor Award Recipient

 
 

To uninstall Adobe Flash Player use their uninstaller:

Uninstall Flash Player | Windows

To see if your IE problems are related to any add-ons, go to start > all programs > accessories > system tools > select Internet Explorer (No add-ons). Or, you could re-set IE back to default settings through control panel > internet options > advanced tab > reset button.
My System SpecsSystem Spec
09 May 2011   #6
Mykill100

windows 7
 
 

Thank you but I've tried flash uninstaller several times and run IE without add ons. The fact SFC verification is only reaching 96% indicates OS problems. I've looked through the CBS log but it seem to be repeating the same repairs over and over unless I'm reading it wrong. I was hoping someone with more knowledge of these logs might take a look at it.
My System SpecsSystem Spec
Reply

 Failed SFC repair help




Thread Tools






Similar help and support threads
Thread Forum
start up repair failed to automatically repair computer
Apparently my computer had double files on the c drive so I deleted ten yesterday, before running a disk clean up. I also deleted several miscellaneous programs (not on C) installed when I bought it. today however it failled to start normally. I've tried what was recommended on system recovery...
Software
windows failed to start, cannot repair, no backup, restore or repair
PLEASE SOMEONE HELP ME. 35+ startup repair attempts and still no dice Windows failed to start.a recent hardware change may be the cause. Start up repair cannot repair this computer automatically. Windows cannot find a system image on this computer No restore points No backup or repair discs...
General Discussion
Repair install failed
I just spent a couple of hours doing a repair install under the guidance of this sites instructions and it went all the way to the end and then I got the prompt that the installation failed and I should run the upgrade advisor to see if my computer was compatible with the version of windows 7 I...
Installation & Setup
Failed to Find OS Load. Startup Repair FAILED
I am currently using windows 7 ultimate x64. I was in the middle of a process restoring my computer to a few days back and suddenly it froze. i did a power shut down and when i turned it back on, i wasn't able to get back into windows. i was brought to startup repair and it gave me errors. 'Boot...
General Discussion
Windows 7 update failed and laptop won't boot. Startup repair failed
I installed the latest round of Windows updates for my Win7 x64 install and it never completed (ran for about 24 hours) so I powered off the machine. Upon restarting, it said: "Windows failed to start. A recent hardware or software change might be the cause" and has instructions for using system...
BSOD Help and Support
Failed repair
I tried to repair my OS cause i had numerous problem with my notebook . I tried to repair it a few times and it keeps failing. Now every time windows boots i get two options one is setup and the other is windows 7. How do i get rid of the setup ? It seems as if windows is trying run the repair even...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:46.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App