Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System is very slow after installing a new graphic card

29 Sep 2011   #21
arjfca

windows 7 Pro x64
 
 

Hello Schroff87

Last evening, OCCT gave a CPU over temperature warning during an heavy and extended test. Did air dust clean the fin of my CPU. I did not see too much accumulation. OCCT advise that the test may cause a burst in temperature

- The previous card was a small ATI Saphir HD 2600 pro

- I will look for Direct X redist june 2010

Martin


My System SpecsSystem Spec
.

29 Sep 2011   #22
arjfca

windows 7 Pro x64
 
 

Schroff87

Direct X redist june 2010 failed to install. Did look in the DirectX.Log. Message is files has been arlready installed.

Did Dx Diag and all test passed except for the 3D. Not tested because of a missing file

While searching, Windows Explorer did cease to functioning. Maybe I have a corrupt file.

Is there a tool to verify for a corrupt file in Win7 64?

Martin
My System SpecsSystem Spec
29 Sep 2011   #23
Schroff87

7 ultimate x64
 
 

Yes, type "cmd" in start menu, right click on it and click run as admin. When command prompt opens type SFC /scannow.
My System SpecsSystem Spec
.


29 Sep 2011   #24
arjfca

windows 7 Pro x64
 
 

Schroff87

Thanks a lot for your generous help

Scannow as not detected a problem

I will test the memory and see if it fail somewhere. I don't have any other idea of solution to test

Maybe the casing is over heating and affect the mainboard or memory

Martin
My System SpecsSystem Spec
29 Sep 2011   #25
Schroff87

7 ultimate x64
 
 

You keep getting Direct X/3d related errors and you used ccleaner & system mechanic. Maybe you should reinstall windows considering the mess those two leave the registry in. If you happen to use K-lite codec pack dump that too (not directly related to your problem but general advice.)
My System SpecsSystem Spec
29 Sep 2011   #26
arjfca

windows 7 Pro x64
 
 

Quote   Quote: Originally Posted by Schroff87 View Post
You keep getting Direct X/3d related errors and you used ccleaner & system mechanic. Maybe you should reinstall windows considering the mess those two leave the registry in. If you happen to use K-lite codec pack dump that too (not directly related to your problem but general advice.)
OK

Never use K-Lite son won't look for that.

Never re-install win 7. I bought the licence from the net and I'm not sure where I store that number..... shame on me....

I will look for the procedure

I still suspect either a power supply on the border line or temperature. I lost Internet also once in a while.

- So Intermittent screen problem with portion of a background image
appearing in the actual front display
- Internet problem, Lost or major slow down
- Slowing down PC

Lots of problem since I installed this new card.

Have a good evening

Martin
My System SpecsSystem Spec
Reply

 System is very slow after installing a new graphic card




Thread Tools





Similar help and support threads
Thread Forum
Error after installing graphic card driver
Hi,i recently installed windows 7 ultimate x32.when i install graphic card drivers i get "display kernel driver stopped responding and has been succesfully recovered" and i get TDR errors.i can play games with default driver that windows installed but games are laggy and crashes after 30 minutes if...
Graphic Cards
Computer won't boot up after installing graphic card
HI I bought a evga 550ti card and put it in my computer but when I turn it on it gets to the starting windows screen and then shuts off. Any help would be nice
Graphic Cards
Overclocking system AND graphic card
Hi, Just a simple question, Q. Is it safe/stable to overclock system and in addition to that also overclock graphic card.? How to be sure for stability. previous Gr. Card HD 4350 died I suspect because I did little overclocking in system ( as now) and then in graphic card was on AUto Tune,...
PC Custom Builds and Overclocking
BSOD after installing the new graphic card
Thanks for the welcome from CarlTR6! :D I have included all documents in the zip file. Just a brief retrospect of the incident. I upgraded my graphic card, PSU, and add a new game pad to my PC. Shortly after installing the new card, BSOD followed. It always occur when i play Bio Hazard 4. The...
BSOD Help and Support
BSOD when stand by, graphic card crashed, slow start up
hello everyone! i have a satellite a500-1dn i have some troubles with it! it's happening that when it's standing by to crash! i mean the windows it's blocked and the only thing i can do is power off! also happens to crash with BSOD! since now i had 3 crashes of the graphic driver! i tried...
BSOD Help and Support
Which Graphic Card to buy? for my system
Hello! My name is john from Istanbul I am using now geforce 4 mx 440 agp 8X and I want to change and will get my card compatible with windows 7 ultimate I just want to get a working system I have no expectations for the game I have expectations for the film My system : Motherboard:ASUS P4...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App