Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: I set maximum memory to 2 with no pagefile

30 Sep 2011   #1

Windows 7 x64 Ultimate
I set maximum memory to 2 with no pagefile

Ok so I was trying to install dell quickset which doesn't work no matter what I do since I upgraded to 8gb or ram and installed a ssd. The main problem is I don't have the pagefile turned on so windows won't boot and safe mode boots but only has 240MB of ram and it so full you can't run anything.

Can somebody please up, I have no system restore points. All I need to do is undo the max memory setting. Tried last known config, running msconfig in safe mode, bcdedit.

My System SpecsSystem Spec

30 Sep 2011   #2

Windows 7 Pro 32bit / Windows 7 Ultimate x64

Can you get to System Properties? You can change the pagefile size there.
My System SpecsSystem Spec
30 Sep 2011   #3

Windows 7 Pro 32bit / Windows 7 Ultimate x64

Poked about a bit and found System Properties IS sysdm.cpl. Use the runbox to load the control panel element. In the Advanced tab under Performance Settings you should find Virtual memory settings.

Virtual Memory Paging File - Change - Vista Forums

Good luck,
My System SpecsSystem Spec

30 Sep 2011   #4
Microsoft MVP

64-bit Windows 10 Pro build 10586

Hello Fataldesain, and welcome to Seven Forums.

You could use the tutorial below to uncheck the Maximum memory box to have Windows use all available memory by default.

Afterwards, you could try to set your page file back to default of having your Windows drive C: managed by the system.

Hope this helps,
My System SpecsSystem Spec

 I set maximum memory to 2 with no pagefile

Thread Tools

Similar help and support threads
Thread Forum
Maximum memory per slot?
Hi, I have a dell dimension 9200 and the motherboard can handle a maximum of 4gb of ram, but is there a limit per slot? In other words does it have to be 4 x 1gb sticks of ram or can I use 2 x 2gb sticks? The reason I ask is that I've had lots of bsod and crashes recently and after...
Hardware & Devices
Memory - Set Maximum Amount Used by Windows
How to Set Maximum Memory to be Used by Windows 7 and Windows 8 This will show you how to specify the maximum amount of physical memory (RAM) to be used by Windows to simulate a low memory configuration by using less RAM, or to make sure that you are using all of your installed RAM. Windows...
Win7x64 only detects 3.7 GB RAM with Maximum memory
Hello. This is a very small and simple question, but it troubles me not to find an answer. As you can see, my Windows detects only 3.7 GB of RAM when in total there should be a complete (almost) 4GB. The info is in my specs. I tried to change the BOOT advanced options in the BOOT tab of msconfig to...
Performance & Maintenance
Checking maximum memory allowed
Hi, Quick question. As I've seen in other threads that it depends on the mobo. Is there any software I can use to check the maximum memory allowed by a specific system? I have this laptop Sony Vaio VGN-FS810. It's quite old. It was working with 2 modules of 512 MB each. I acquired a 2GB...
Hardware & Devices
Msconfig maximum memory issue
Hello! Msconfig - boot - advanced - unchecked maximum memory - windows 7 detected 4096 of memory (what is true, i have 4 gb memory on my system) After ok, and restart in maximum memory field there is not 4096 it is 0 Is that normal behaviuor? My computer - properties - installed memory...
General Discussion
Maximum usable memory for 32-bit Win 7
Hi, I used to have Vista (32-bit) on the machine, 4 GB RAM installed on the motherboard. Vista was able to allocate around 3.00 GB for itself, with a videocard that had 256 megs of RAM on it. As my old video card busted, I changed it into Club3D's Geforce GTS 250 with 1 GB of memory, and...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:53.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App