Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: chkdsk can not performed?

18 Oct 2011   #1
fluidmotion

Win7 Starter 32 bits
 
 
chkdsk can not performed?

When this HP Mini is booting, chkdsk runs every time, and this message "autochk can not run due to error caused by software installed recently......use system restore....." always shows up.

what is going on?


My System SpecsSystem Spec
.
18 Oct 2011   #2
Brink

64-bit Windows 10 Pro
 
 

Hello Fluidmotion,

What antivirus program do you have installed? Is it AVG by chance?


As a test, try this:
  • Uninstall your antivirus program for now.
  • Schedule chkdsk to run at boot again.
  • Restart the computer to have chkdsk run.
  • When it's finished and you are back in Windows 7, reinstall your antivirus program.
Hope this helps,
Shawn
My System SpecsSystem Spec
19 Oct 2011   #3
fluidmotion

Win7 Starter 32 bits
 
 

This HP Webcam stopped working a few weeks ago, and I called HP tech support Sunday.

uninstalled webcam, reinstalled it, that did not work,
finally, they told me to restored this netbook to facory condition.
and
I installed Norton internet security when restored this HP mini.
and i have window defender.
so
i will try your test.
My System SpecsSystem Spec
.

19 Oct 2011   #4
fluidmotion

Win7 Starter 32 bits
 
 

uninstalled Norton,
and
restart computer,
chkdsk started automatically,

Thank you, Shawn.
after chkdsk completed, restarted PC.
I do not see that message on screen anymore.
My System SpecsSystem Spec
19 Oct 2011   #5
fluidmotion

Win7 Starter 32 bits
 
 

Do you know how Norton Internet Security interfered with chkdsk?
My System SpecsSystem Spec
19 Oct 2011   #6
Mits

Windows 7 Professional x64
 
 

To answer this question I'd need several thousands of pages.

For the love of god, avoid Norton at any cost.
My System SpecsSystem Spec
19 Oct 2011   #7
kado897

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bit Service Pack 1
 
 

You might try setting Boot Time Protection off.

chkdsk can not performed?-2011-10-19-11-20-00_norton-360.jpg


My System SpecsSystem Spec
19 Oct 2011   #8
Brink

64-bit Windows 10 Pro
 
 

Fluidmotion,

That's great news. It's most likely the "Boot Time Protection" setting that Kado mention that is preventing chkdsk from running at startup. Turning it off may allow you to run chkdsk at boot, and then turn it back on afterwards.
My System SpecsSystem Spec
Reply

 chkdsk can not performed?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
The request could not be performed because of an I/O device error
I had a 1TB WD Mypassport but having problem with corrupt Master Boot Record Tried to repair my external hard drive using bootrec /fixmbr bootrec /fixboot but i got this error message "The request could not be performed because of an I/O device error" :cry:
Hardware & Devices
DISKPART clean performed accidently. how to recover data?
Hello everyone, I had major partition problems and tried fixmbr,fixboot,etc and even rebuilding bcd was not working. I was misguided by one of the other Forums and entered: DISKPART Select Volume 1 DISKPART Clean Volume 1 The Volume has been cleaned where volume 1 was my C...
General Discussion
The request could not be performed because of an I/O device error
I have a Flash Memory 8GB. I can't Format it, i try format it with of DISK Managment and Command Prompt but i can't. http://www.up3.98ia.com/images/xsm0jmzg8rph7q817j3.jpg http://www.up3.98ia.com/images/yzkwmdjzrqrygb8i88p4.jpg http://www.up3.98ia.com/images/m0w7l5ybp06llxn1yxzu.jpg...
Hardware & Devices
Tools Chkdsk with no /f /r says errors, bootup chkdsk says none
AHCI disk. Running chkdsk from Properties Tools with no autofix says there are errors. Dismount the drive and reboot. Chkdsk reports no errors found. Properties Tools Chkdsk still syas there are errors. Auslogics Defrag also says there are errors.
Hardware & Devices
explorer.exe crashes and restarts when certain actions are performed
Hello, So for the past month or so, explorer.exe has been crashing continuously. It happens on several occasions... -Most notable when I first boot up Windows 7, it crashes and restarts in an assiduous manner, for maybe 10-15 times until it stops suddenly and starts working again -When...
BSOD Help and Support
HDD Error: The request could not be performed because of an I/O device
Hi I recently did a clean install of W7 Professional. I installed W7 first on the SSD. Once the operating system was running I then proceeded to add the internal HDD (500G Seagate). Unfortunately the system just does not seem to recognise the HDD. Device Manager: In Device Manager->Disk...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App