Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: WEI test cannot be completed

30 Oct 2011   #1
Gangren

Windows 7 Ultimate x64
 
 
WEI test cannot be completed

Keep getting the same error over and over, tried many things (inclduing scf /scannow) but to no avail.

Here is the bit from the log:

Code:
1348769 (3424) - winsat\logging.cpp:0815: --- START 2011\10\30 17:15:04 ---
1348769 (3424) - winsat\main.cpp:4301: Command Line = "C:\Windows\system32\winsat.exe" formal -restart clean -cancelevent 8e00fb41-d1d6-4e88-8347-83b99be94b73
1348769 (3424) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occured
1348784 (3424) - winsat\main.cpp:4474: > IsFormal=TRUE  IsMoobe=FALSE.
1348815 (3424) - winsat\main.cpp:4585: Watch dog system enabled
1348815 (3424) - winsat\main.cpp:4600: Main watch dog timer set to 600.0 seconds
1348878 (3424) - winsat\main.cpp:2505: > DWM not running.
1348878 (3424) - winsat\main.cpp:2470: > EMD service will be restored on exit.
1348893 (3424) - winsat\syspowertools.cpp:0983: > Read the active power scheme as '8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
1348893 (3424) - winsat\main.cpp:2793: > power policy saved.
1348909 (3424) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
1348909 (3424) - winsat\main.cpp:2814: > power policy set to maximum.
1349736 (3424) - winsat\logging.cpp:1763: ERROR: pahse enter/leave imballance
1349736 (3424) - winsat\main.cpp:0948: > IsOfficial=TRUE  IsFormal=TRUE  IsMoobe=FALSE  RanOverTs=FALSE  RanOnbatteries=FALSE
1349736 (3424) - winsat\main.cpp:1775: > Run Assessment features 
1349767 (3424) - winsat\main.cpp:1775: > Run Assessment dwm -aname DWM -time 10 -fbc 10 -disp off -normalw 12 -width 1280 -height 1024 -winwidth C(1144) -winheight C(915) -rendertotex 6 -rtdelta 3 -nolock
1360812 (3424) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
1360812 (3424) - winsat\main.cpp:2037: > DWM Assessment results processing SUCCESS
1360827 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1366365 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1371857 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
1377504 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
1383198 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Batch -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(10) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1388689 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Alpha -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 300 -batchcnt C(75) -objs C(26) -rendertotex 6 -rtdelta 3 -texpobj C(1)
1394180 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname Tex -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -texshader -totaltex 10 -texpobj C(4) -rendertotex 6 -rtdelta 3
1399781 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname ALU -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 500 -batchcnt C(125) -objs C(20) -noalpha -alushader -totaltex 10 -texpobj C(1) -rendertotex 6 -rtdelta 3
1405413 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomF4 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 150;200;241 -batchcnt C(50);C(200);C(300) -objs C(12);C(26);C(45) -noalpha -geomf4shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
1413166 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname GeomV8 -time 7 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75;100;120 -batchcnt C(25);C(100);C(150) -objs C(8);C(17);C(29) -noalpha -geomv8shader -texpobj C(0) -rendertotex 6 -rtdelta 3 -tierframes 60 -tiertime 1
1420638 (3424) - winsat\main.cpp:1775: > Run Assessment d3d -dx10  -aname CBuffer -time 5 -fbc 10 -disp off -animate 10 -width 1280 -height 1024 -totalobj 75 -batchcnt C(25) -objs C(8) -rendertotex 6 -rtdelta 3 -texpobj C(1) -cbuffershader -cbufa 2 -cbuff 5 -cbufp 6
1425989 (3424) - winsat\main.cpp:1775: > Run Assessment mfmedia -input C:\Windows\Performance\WinSAT\winsat.wmv -nopmp
1546079 (3424) - media\mediaerror.cpp:0095: Hata: En fazla süre a??ld?, makine çok yava? -- s?nama durduruluyor.
1546391 (3424) - media\mediaerror.cpp:0151: mediaetw.cpp @ 2010: 0x00000001 == S_FALSE
1546437 (3424) - media\mediaerror.cpp:0151: mediaetw.cpp @ 2010: 0x00000001 == S_FALSE
1546437 (3424) - media\mediaerror.cpp:0151: mediaetw.cpp @ 2010: 0x00000001 == S_FALSE
1546500 (3424) - winsat\main.cpp:1775: > Run Assessment mediaex -input C:\Windows\Performance\WinSAT\Clip_1080_5sec_MPEG2_HD_15mbps.mpg -dshow -video offscreen -audio mute -width 100%m -height 100%m -constrain -savereg -autoprofname -expfrmmin 270 -expfrmmax 300 -overrideframetype int2fps
1846505 (3424) - winsat\watchdog.cpp:0149: Assessment watch dog triggered, canceling current assessment, setting main watch dog timer to 60.0 seconds
1846505 (3424) - winsat\main.cpp:1948: > Cancel received, waiting 10000ms for mediaex to cancel
1848190 (3424) - winsat\main.cpp:1958: > mediaex assessment succesfully canceled.
1848190 (3424) - winsat\processresults.cpp:4018: > Wrote video memory bandwidth to the registry 0
1848190 (3424) - winsat\processresults.cpp:1274: Limiting DWM Score to 1.0 - no DWM performance score
1848190 (3424) - winsat\processresults.cpp:1405: WDDM present, holding D3D score at 2.0
1848190 (3424) - winsat\processresults.cpp:1480: > Wrote disk score to the registry 0
1848190 (3424) - winsat\syspowertools.cpp:1015: > Set the active power scheme to 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c'
1848190 (3424) - winsat\main.cpp:2855: > Power state restored.
1848190 (3424) - winsat\main.cpp:2870: > Successfully reenabled EMD.
1848237 (3424) - winsat\main.cpp:2896: > Composition restarted
1848237 (3424) - winsat\watchdog.cpp:0311: Watch dog system shutdown
1848237 (3424) - winsat\main.cpp:4909: > exit value = 12.
Hata: En fazla süre a??ld?, makine çok yava? -- s?nama durduruluyor.

This bit basically says, maximum time passed, computer too slow, test stops.


What seems to be the problem?


My System SpecsSystem Spec
.

30 Oct 2011   #2
cluberti

Windows 8.1 x64
 
 

What language is your OS currently using, and what was originally installed on it? Is one of the two English?
My System SpecsSystem Spec
30 Oct 2011   #3
Gangren

Windows 7 Ultimate x64
 
 

I've built the system from scratch and the current one is Turkish.

It always stops progressing at media playback (tried myself: cannot play the videos located in WinSAT folder. First couple frames and nothing else)
My System SpecsSystem Spec
.


30 Oct 2011   #4
BugOutMachine

Windows 7 / Windows 8.1
 
 

What is your official error? I'm having a problem as well with WEI not being able to read my HDD. See this post.
My System SpecsSystem Spec
31 Oct 2011   #5
Gangren

Windows 7 Ultimate x64
 
 

WEI timeouts at "Tuning Media Decoding" phase and gives an error about not being able to complete the test.

I've cleared the OC but still the same error.
My System SpecsSystem Spec
Reply

 WEI test cannot be completed




Thread Tools





Similar help and support threads
Thread Forum
PLEASE HELP - The action can't be completed because the folder....
hi guys, every single time I try to rename a folder the boring message "The action can't be completed because the folder or the file is in use" appears even if apparently neither the folder or a file in it is in use. What I have to do is: Task Manager > Explorer.exe > End Process > File > New...
General Discussion
backup task has not been completed
Recently installed kaspersky pure 2. 0 .Getting error message that backup task has not been completed. I have read that this is a known issue. Is there a solution to correct this problem? Thanks.
System Security
how to burn a completed project
I've created a Windows live Movie Maker a slide show with music, transitions, etc and am ready to burn it to a DVD to play on a TV. I cannot find the option to do it (my last Windows platform was XP which had a burn section). How do I accomplish this in Windows or is there another program I should...
Music, Pictures & Video
Installation completed with success!!!!
Thanks a lot to everybody who paid attention to my problems with windows 7 installation. Finally I went to my university and took from their a windows 7 pro dvd and everything worked perfect. I also managed to install the windows over both windows XP and 7 thanks to your advices and tutorials....
Installation & Setup
Huuuuge Task Completed!
Well its only taken me a couple of months but I've finally achieved my goal! Basically I was sick of getting disk after disk out to watch a film/tv episode as well as them getting scratched etc. I also realised how many films I'd lent out and not got back! :mad: (bet you have if you think!) ...
Chillout Room

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:09.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App