Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Macrium Reflect (Free 5.0.4118): need help on "recover partition"

05 Oct 2012   #21
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Frank, how are you writing this ISO to the USB drive?


My System SpecsSystem Spec
.
06 Oct 2012   #22
Frank1000

Windows 7 Professional 64 bit
 
 

I'm using YUMI ...
My System SpecsSystem Spec
06 Oct 2012   #23
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Ok, there are no spaces in the ISO name, which is normally where the issue is with YUMI. Are you using the unlisted ISO option? I'm stumped.....how far into the boot process do you get?
My System SpecsSystem Spec
.

06 Oct 2012   #24
Frank1000

Windows 7 Professional 64 bit
 
 

Yes, I used the "unlisted ISO" ... last option in the list. As far as visible during booting, it loads the iso probably until end, since it takes that about 2 minutes as it did with the other iso (which didn't bring any target disks unfortunately) ... and then just reboots ...
My System SpecsSystem Spec
06 Oct 2012   #25
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Frank, does the Macrium Recovery actually load?
My System SpecsSystem Spec
06 Oct 2012   #26
Frank1000

Windows 7 Professional 64 bit
 
 

It does not with the WinPE isos but it does with the Linux iso though. Only there no target disks are provided yet.
My System SpecsSystem Spec
06 Oct 2012   #27
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Frank, could you take a photo of what you are seeing when you use the Linux option, and post it here for us please?
My System SpecsSystem Spec
07 Oct 2012   #28
Frank1000

Windows 7 Professional 64 bit
 
 

sure







My System SpecsSystem Spec
07 Oct 2012   #29
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Frank, Macrium isn't even booting! It looks like you are using the boot from the 'Run from RAM' option. Please use the next option up, as shown below.

Name:  Capture.PNG
Views: 1
Size:  37.8 KB


My System SpecsSystem Spec
07 Oct 2012   #30
Frank1000

Windows 7 Professional 64 bit
 
 

ok, I checked it with a new YUMI sesion with "Try an unlisted ISO", but after booting with YUMI and selecting that iso, it did not load the iso and returned immediately to re-boot.
I then created a new iso and yumi-write-to-USB (screenshot sequence), but that also didn't load and went to re-boot immediately.
When I followed MACRIUM REFLECT - Create Bootable Rescue USB Drive at the first try, it did load the iso and did show my disk to select the drive-image, but then did not show any target disks.













My System SpecsSystem Spec
Reply

 Macrium Reflect (Free 5.0.4118): need help on "recover partition"




Thread Tools





Similar help and support threads
Thread Forum
Win 7 64 Bit Macrium Reflect Free Rescue Disk
I installed Macrium Reflect Free on my Win 7 64 bit and Win XP 32 bit computers. I now have a problem with the Win 7 computer and cannot restore it. I made the rescue disk on the XP machine thinking it would work on both. Sadly that is not the case. The Macrium site deals only with issues with...
Software
Macrium Reflect "Restore" program finds NO files, no *.mrimg files!
Having carefully customised my new computer, I thought it would be wise to create a backup of my c: drive with all of its customizations. (As my computer is a Dell computer I had already used the Dell backup program to create a Factory Default backup/restore disc on 3 DVDs. And that Factory...
Backup and Restore
Macrium Reflect Free ...I'm in :-)
Sorry, it's me again! I started my Macrium imaging experience today with the Tecra R840 laptop (Win7 Pro 64-bit). 1- After installation, I created the Rescue disc with sucess :) (I already had the 1.7 GB WAIK stored in one of my USB 3.0 external hdd, so it was done in a breeze. But...I...
Backup and Restore
Macrium Reflect Linux Rescue CD "RTnetlink answers = file Exist"
Hi, I'm currently using Macrium Reflect Free to backup my Netbook's Drive C: which contains Windows 7. Now I'm trying to see if my backup actually works by trying to restore it through the Linux Rescue ISO from Macrium but since this is a netbook and I don't have an external ODD, I'll make do...
Backup and Restore
Macrium Reflect (free version)
I am trying to restore a backup image of my C: partition which is on an external drive. When I use the macrium boot cd it asks me to select the image file, but does not list the external drive the image in on. My setup has two external drives H: and M: my image is on M and only H: is listed. I...
Backup and Restore

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App